Model & package intelligence
Model text, package form, tray or reel details, and visual evidence are reviewed together before RFQ feedback.
AMASS XT60H-M XT60H
Configuration
1 options
Configuration
26+
Available for RFQ
Technical data
Product details
16
specifications
Core information
- Product name
- AMASS XT60H-M
- Type
- AMASS
- Minimum package
- 500 袋装
Technical parameters
- Electronic Component
- Electronic Component
- Electronic Component
- AMASS
- Electronic Component
- XT60H-M
- Electronic Component
- 1
- Type
- Electronic Component
- Electronic Component
- Power Supply Connector
- Electronic Component
- 3.96g
- Electronic Component
- Electronic Component
- Electronic Component
- 1
- Electronic Component
- BM0227791486
- Interface
- Electronic Component
- Electronic Component
- Electronic Component
- Electronic Component
- 500
For datasheets, package documents, compatible-part guidance, or other technical resources, contact WMSIC customer service. Availability is confirmed case by case.
XT60H-M 产品概述
一、产品简介
XT60H-M（AMASS/艾迈斯）是一款面向航模与电源连接的直式公头插头，颜色为黄色，适用于两线直流（DC）供电连接。该件为焊接式电缆端子，设计紧凑、接触可靠，常用于模型飞机、无人机、电池组和小型电源系统的快速插拔连接。
二、主要规格参数
- 型号：XT60H-M（公头）
- 品牌：AMASS（艾迈斯）
- 颜色：黄色
- 接口形态：公头（直式）
- 极数：2 PIN
- 额定电流：30 A
- 额定电压：500 V
- 安装方式：用于电缆，焊接连接
- 触点材质：铜，表面金属化（gold flash）
三、结构与材质说明
本产品为两极直式插头，触点采用铜材并进行金镀（gold flash）处理，以提高导电性与抗氧化能力。壳体颜色为行业常用的黄色，便于辨识。金属镀层属薄层镀金（gold flash），可改善接触可靠性与耐腐蚀性，但非厚镀金，属常规耐用型接触处理。
四、安装与焊接建议
- 线径选择：推荐使用与30A额定相匹配或略高的导线（例如约12–14 AWG / 2–4 mm² 区间，视长短和散热条件而定）；长线或高负载请选更粗线径以减少压降与发热。
- 焊接工艺：先对导线和触点进行预镀锡，使用含酚醛或松香基助焊剂，焊接温度控制在约350–370°C，尽量缩短加热时间以免损伤绝缘体。焊后检查焊点饱满，无虚焊、冷焊或短路。
- 绝缘与固定：焊后建议加热缩管或电工胶布作应力缓冲与防护；避免线缆直接对接口施加拉力，必要时增加应力释放结构或胶固定。
五、典型应用场景
- 航模（飞机、直升机、无人机）电池与电调之间的电源连接
- 小型锂电池组输出端接口
- 机器人与便携电源模块的直流供电连接
- 各类需快速插拔的高可靠直流连接场合（在额定电流范围内）
六、使用注意事项与维护
- 严禁超过额定30A连续负载运行，以免过热造成接触电阻上升或损坏。
- 确认正负极方向后插拔，避免短路；配对插头必须匹配型号与极性。
- 金镀为薄层处理，常规环境下防氧化效果良好，但频繁拔插或恶劣环境（盐雾、腐蚀性气体）会加速磨损，需定期检查接触面状况。
- 存放与使用时避免高温、溶剂浸泡或机械冲击。
总结：XT60H-M（AMASS）以其紧凑的两极直流设计、铜触点与金镀处理，提供可靠的航模及小型电源连接方案。按规范焊接和合理选线可确保长期稳定工作。
Request for quote
Send RFQ
Use the form for single models, category sourcing, and multi-line BOM requirements.
Product sourcing intelligence
Model, package, availability, and BOM fit reviewed before quotation.
WMSIC turns product data, package visuals, BOM context, and sourcing signals into practical RFQ notes for buyers.
BOM matching & alternatives
BOM lines are compared by package, parameters, quantity, and workable alternatives for cleaner sourcing decisions.
Sourcing availability signal
Stock routes, quotation confidence, lead-time notes, and shipment feasibility are checked before sales follow-up.
Buyer sourcing scenarios
Examples of how common component sourcing requests are organized.
Typical RFQ scenarios based on the WMSIC form fields, catalog data, manual review steps, and shipment preparation workflow.
The buyer shares the full part number, package requirement, quantity, destination, and available product photos so the quotation can record the exact version under review.
A multi-line BOM is organized into direct sourcing lines, lines that need package clarification, and lines where alternative-part review is permitted.
The original manufacturer part number, datasheet revision, application, critical limits, and acceptable changes are collected before possible candidates are discussed.
Sample quantity, minimum packing, package format, target date, and courier destination are kept together in one RFQ conversation.
Package photos, model markings, board context, and the quantity needed for repair help focus the sourcing review on the relevant version.
When a suffix or package note is incomplete, the response records the open difference and requests buyer confirmation before procurement proceeds.
Packing format, carton notes, invoice details, courier option, destination, and tracking handoff are coordinated around the confirmed order.
The request connects the previously used model, current demand, package evidence, target timing, and replenishment sourcing route.
Related products
Packaged components ready for RFQ.
