Model & package intelligence
Model text, package form, tray or reel details, and visual evidence are reviewed together before RFQ feedback.
YJX TAXM11.0592M2ILFBET2T
Configuration
1 options
Configuration
26+
Available for RFQ
Technical data
Product details
19
specifications
Core information
- Product name
- YJX TAXM11.0592M2ILFBET2T
- Type
- YJX
- Minimum package
- 1000 编带
Technical parameters
- Electronic Component
- Electronic Component
- Electronic Component
- YJX
- Electronic Component
- TAXM11.0592M2ILFBET2T
- Electronic Component
- 1
- Package
- HC-49S-SMD
- Electronic Component
- Passive Crystal Oscillator
- Electronic Component
- 0.963g
- Frequency
- 11.0592MHz
- Electronic Component
- 1
- Electronic Component
- BM0264498426
- Operating Temperature
- 20℃~+70℃
- Electronic Component
- ±30ppm
- Crystal Oscillator Type
- SMDCrystal Oscillator
- Load Capacitor
- 20pF
- Frequency
- ±30ppm
- Electronic Component
- Electronic Component
For datasheets, package documents, compatible-part guidance, or other technical resources, contact WMSIC customer service. Availability is confirmed case by case.
TAXM11.0592M2ILFBET2T无源贴片晶振产品概述
一、产品基本信息
TAXM11.0592M2ILFBET2T是雅晶鑫（YJX）推出的无源贴片石英晶振，型号后缀清晰定义了核心规格：“11.0592M”对应振荡频率，“SMD”标注贴片封装类型，属于HC-49S标准贴片系列。作为无源晶体谐振器，该产品无内置驱动电路，需外接振荡电路（如单片机XTAL引脚配合负载电容）实现时钟输出，具备结构简单、可靠性高的特点。
二、核心性能参数详解
该晶振参数针对通用电子设备的时钟需求优化，关键指标如下：
- 振荡频率：11.0592MHz，为串口通信、单片机时钟的经典适配频率（可被12整除，避免波特率误差）；
- 常温频差：±30ppm，换算为频率波动约±331.78Hz，满足多数工业/消费类设备的精度要求；
- 负载电容：20pF，是无源晶振工作的必需匹配参数，电路中需并联对应电容（如20pF±5%）；
- 频率稳定度：±30ppm，指工作温度范围内的最大频率波动，与-20℃~+70℃的温度范围精准匹配；
- 等效串联电阻（ESR）：40Ω，低于同规格产品典型值（通常≤50Ω），可提升振荡电路的起振可靠性与信号稳定性。
三、封装与生产适配性
该产品采用HC-49S-SMD贴片封装，适配自动化生产流程：
- 封装尺寸紧凑（参考标准：11.5mm×4.8mm×3.5mm），适配多数PCB板贴装空间；
- 引脚设计兼容SMT回流焊工艺，可直接集成到自动化生产线，无需手工焊接；
- 金属/塑料外壳组合封装，兼具抗电磁干扰（EMI）与机械防护能力，降低环境因素对晶体性能的影响。
四、适用环境与可靠性
TAXM11.0592M2ILFBET2T的环境参数覆盖通用场景需求：
- 工作温度范围：-20℃~+70℃，属于常温工业级标准，适用于室内设备、一般户外电子装置（非极端温区）；
- 无源设计优势：无内置有源元件，避免驱动电路故障风险，长期可靠性高，寿命可达数万小时；
- 抗干扰性：石英晶体本身频率稳定性强，配合封装防护，可在弱电磁干扰环境下稳定工作。
五、典型应用场景
因11.0592MHz的频率特性，该晶振广泛应用于：
- 单片机/MCU时钟源：适配51系列、STM32等主流MCU，提供精准时钟基准；
- 串口通信模块：UART接口理想时钟（如9600bps、115200bps波特率无误差匹配）；
- 消费电子设备：智能家居控制器、小型家电、便携式电子装置的时钟模块；
- 工业控制单元：小型PLC、传感器节点、数据采集模块的辅助时钟组件。
总结
TAXM11.0592M2ILFBET2T是一款高性价比无源贴片晶振，平衡了精度、可靠性与成本，适合对时钟精度要求适中但需稳定输出的通用电子设备场景。
Request for quote
Send RFQ
Use the form for single models, category sourcing, and multi-line BOM requirements.
Product sourcing intelligence
Model, package, availability, and BOM fit reviewed before quotation.
WMSIC turns product data, package visuals, BOM context, and sourcing signals into practical RFQ notes for buyers.
BOM matching & alternatives
BOM lines are compared by package, parameters, quantity, and workable alternatives for cleaner sourcing decisions.
Sourcing availability signal
Stock routes, quotation confidence, lead-time notes, and shipment feasibility are checked before sales follow-up.
Buyer sourcing scenarios
Examples of how common component sourcing requests are organized.
Typical RFQ scenarios based on the WMSIC form fields, catalog data, manual review steps, and shipment preparation workflow.
The buyer shares the full part number, package requirement, quantity, destination, and available product photos so the quotation can record the exact version under review.
A multi-line BOM is organized into direct sourcing lines, lines that need package clarification, and lines where alternative-part review is permitted.
The original manufacturer part number, datasheet revision, application, critical limits, and acceptable changes are collected before possible candidates are discussed.
Sample quantity, minimum packing, package format, target date, and courier destination are kept together in one RFQ conversation.
Package photos, model markings, board context, and the quantity needed for repair help focus the sourcing review on the relevant version.
When a suffix or package note is incomplete, the response records the open difference and requests buyer confirmation before procurement proceeds.
Packing format, carton notes, invoice details, courier option, destination, and tracking handoff are coordinated around the confirmed order.
The request connects the previously used model, current demand, package evidence, target timing, and replenishment sourcing route.
Related products
Packaged components ready for RFQ.
