Model & package intelligence
Model text, package form, tray or reel details, and visual evidence are reviewed together before RFQ feedback.
YONGYUTAI XC6206-2.8V XC6206
Configuration
1 options
Configuration
Date code within 2 years
Available for RFQ
Technical data
Product details
19
specifications
Core information
- Product name
- YONGYUTAI XC6206-2.8V
- Type
- YONGYUTAI
- Minimum package
- 3000 圆盘
Technical parameters
- Electronic Component
- Electronic Component
- Electronic Component
- 350mV@(30mA)
- Electronic Component
- YONGYUTAI
- Electronic Component
- XC6206-2.8V
- Electronic Component
- 1
- Package
- SOT-23-3L
- Electronic Component
- Linear Regulator(LDO)
- Electronic Component
- 0.037g
- Electronic Component
- 1
- Electronic Component
- BM0225803270
- Operating Temperature
- 40℃~+85℃@(Ta)
- Operating Voltage
- 6V
- Output
- Electronic Component
- Output Voltage
- 2.8V
- Output Current
- 250mA
- Output Type
- Electronic Component
For datasheets, package documents, compatible-part guidance, or other technical resources, contact WMSIC customer service. Availability is confirmed case by case.
XC6206-2.8V 产品概述
一、产品简介
XC6206-2.8V 是一款固定输出、正极性线性稳压器（LDO），由 YONGYUTAI(永裕泰) 推出，适用于对低噪声、低静态电流与空间受限场合。器件工作电压为 6V，输出电压固定为 2.8V，最大输出电流可达 250mA，封装为 SOT-23-3L，适配多种便携与嵌入式系统供电需求。
二、主要参数
- 输出电压：2.8V（固定）
- 输入/工作电压：6V
- 输出电流：最大 250mA
- 压差（Dropout）：350mV @ 30mA（在更高电流下压差会增加，请参考器件特性曲线）
- 静态电流（Iq）：典型 1µA，适合电池供电场景
- 工作温度范围：-40°C ~ +85°C（Ta）
三、功能特性与保护
- 短路保护：内置短路或输出短接时的限制电流功能，提升系统可靠性。
- 过流保护：当输出电流超出安全范围时，芯片自动限制电流，防止损坏。
- 稳压精度与低噪声：适合对模拟或数模混合电路要求较高的供电场合。
四、封装与典型应用
- 封装：SOT-23-3L，小体积适合空间受限的电路板设计。
- 典型应用：便携设备、电池供电模块、MCU/传感器供电、低功耗无线终端、参考电源和电源管理子模块。
五、设计与使用建议
- 电容要求：建议在输入端和输出端分别并联旁路电容（常用 1µF 陶瓷电容），输出端电容对稳定性与瞬态响应影响显著，应靠近引脚布局。
- 热设计：在 Vin 高、Iout 大时，芯片功耗 P = (Vin − Vout) × Iout 可能较高，SOT-23 封装热阻限制需通过铺铜、散热层或热孔来改善散热，避免过热触发热关断。
- 布局要点：短而粗的电源与地线，输出电容靠近输出引脚，良好的地平面以降低压降与噪声耦合。
六、选型与注意事项
- 压差指标以 30mA 条件给出，实际在 250mA 工作时压差与温度会增加，应在系统级考虑最坏情形。
- 若系统对输出纹波、瞬态响应或更高电流有更严要求，可评估更低压差或更高电流能力的 LDO 或配合开关电源使用。
总结：XC6206-2.8V 以其极低静态电流、小体积和基本保护特性，适合电池供电与低功耗应用。设计时关注外部电容、热管理与 PCB 布局，可获得稳定可靠的 2.8V 电源输出。
Request for quote
Send RFQ
Use the form for single models, category sourcing, and multi-line BOM requirements.
Product sourcing intelligence
Model, package, availability, and BOM fit reviewed before quotation.
WMSIC turns product data, package visuals, BOM context, and sourcing signals into practical RFQ notes for buyers.
BOM matching & alternatives
BOM lines are compared by package, parameters, quantity, and workable alternatives for cleaner sourcing decisions.
Sourcing availability signal
Stock routes, quotation confidence, lead-time notes, and shipment feasibility are checked before sales follow-up.
Buyer sourcing scenarios
Examples of how common component sourcing requests are organized.
Typical RFQ scenarios based on the WMSIC form fields, catalog data, manual review steps, and shipment preparation workflow.
The buyer shares the full part number, package requirement, quantity, destination, and available product photos so the quotation can record the exact version under review.
A multi-line BOM is organized into direct sourcing lines, lines that need package clarification, and lines where alternative-part review is permitted.
The original manufacturer part number, datasheet revision, application, critical limits, and acceptable changes are collected before possible candidates are discussed.
Sample quantity, minimum packing, package format, target date, and courier destination are kept together in one RFQ conversation.
Package photos, model markings, board context, and the quantity needed for repair help focus the sourcing review on the relevant version.
When a suffix or package note is incomplete, the response records the open difference and requests buyer confirmation before procurement proceeds.
Packing format, carton notes, invoice details, courier option, destination, and tracking handoff are coordinated around the confirmed order.
The request connects the previously used model, current demand, package evidence, target timing, and replenishment sourcing route.
Related products
Packaged components ready for RFQ.
1 Piece Integrated Circuit for IRS20124S IRS21956S SOP-20 IRS2453DS SOP-14
- Model
- IRS20124S
- Package
