Model & package intelligence
Model text, package form, tray or reel details, and visual evidence are reviewed together before RFQ feedback.
ADI/LINEAR MAX6006AEUR+T MAX6006AEUR
Configuration
1 options
Configuration
Date code within 2 years
Available for RFQ
Technical data
Product details
19
specifications
Core information
- Product name
- ADI(Analog Devices) / LINEAR MAX6006AEUR+T
- Type
- ADI/LINEAR
- Minimum package
- 2500 圆盘
Technical parameters
- Electronic Component
- Electronic Component
- Electronic Component
- ADI(Analog Devices) / LINEAR
- Electronic Component
- MAX6006AEUR+T
- Electronic Component
- 1
- Package
- SOT-23-3
- Electronic Component
- Voltage Reference IC
- Electronic Component
- ±0.2%
- Electronic Component
- 0.04g
- Electronic Component
- 1
- Electronic Component
- BM0258872550
- Operating Temperature
- 40℃~+85℃@(Ta)
- Electronic Component
- 30ppm/℃
- Output Voltage
- 1.25V
- Output Current
- 2mA
- Output Type
- Electronic Component
- Static Current(Iq)
- 1uA
For datasheets, package documents, compatible-part guidance, or other technical resources, contact WMSIC customer service. Availability is confirmed case by case.
MAX6006AEUR+T 产品概述
一、产品简介
MAX6006AEUR+T 是一款高精度、超低功耗的并联（分流）电压基准，固定输出1.25V，适用于对电源基准稳定性与微弱功耗有严格要求的系统。器件提供小封装（SOT-23-3）和卷带供货（+T），便于量产贴片装配。
二、主要电气参数
- 输出电压：固定 1.25V
- 输出电流能力：典型 2mA（并联型，需通过外部电阻设定工作电流）
- 初始精度：±0.2%
- 温度系数：30 ppm/℃
- 静态电流（Iq）：1 μA（微功耗）
- 最低调节电流（阴极/供电端）：1 μA（保持基准稳定的最低工作电流）
- 噪声（0.1Hz–10Hz）：30 μVpp
- 工作温度范围：-40℃ 至 +85℃（Ta）
- 封装：SOT-23-3
三、关键特性与优势
- 高精度与低漂移：±0.2% 的初始精度结合 30 ppm/℃ 的低温漂，适合精密测量与ADC参考源。
- 极低静态电流：1 μA 的静态电流非常适合电池供电或功耗敏感的便携设备。
- 低频噪声小：0.1Hz–10Hz 仅30 μVpp，有利于低速、高分辨率采样场景。
- 小封装、易装配：SOT-23-3 芯片尺寸小，适合空间受限的应用，同时支持卷带包装，便于自动化生产。
四、典型应用场景
- 高精度ADC/DAC参考电压
- 便携式测量仪器与传感前端
- 电池管理与便携医疗设备
- 精密放大器基准与电流源校准
- 工业控制与数据采集系统
五、使用建议与注意事项
- 工作方式：作为分流基准，须通过外部电阻从系统电源引入稳定的阴极电流。保持工作电流高于最小调节电流（1 μA）以确保基准稳定。
- 温漂管理：30 ppm/℃ 是温度敏感场合的良好基础，但在极宽温度范围内建议进行系统级温度补偿或校准。
- 去耦与布局：靠近基准引脚放置滤波电容以抑制噪声；地线尽量短且回流可靠，避免数字开关噪声耦合到基准。
- 电流裕量：若需驱动外部负载或参考缓冲，请在设计中为基准留出足够的调节电流余量或使用低漂移缓冲器。
六、封装与采购信息
- 封装：SOT-23-3，适合空间受限应用。
- 供货形式：+T 表示卷带（Tape & Reel），便于SMT贴装。
- 品牌与兼容：MAX6006 系列属于高精度基准产品线，适合替换或参考同类并联固定基准器件时使用。
七、选型要点
- 若系统对长时间稳定性、低频噪声和超低功耗有严格要求，MAX6006AEUR+T 是可靠选择。
- 若需较大输出电流或更低温漂，考虑搭配外部缓冲放大器或选择更高性能的基准系列。
总结：MAX6006AEUR+T 将低静态电流、高初始精度和低温漂结合在小型封装中，非常适合便携式、高精度测量与参考应用。设计时关注工作电流设置和布局去耦，可发挥其最佳性能。
Request for quote
Send RFQ
Use the form for single models, category sourcing, and multi-line BOM requirements.
Product sourcing intelligence
Model, package, availability, and BOM fit reviewed before quotation.
WMSIC turns product data, package visuals, BOM context, and sourcing signals into practical RFQ notes for buyers.
BOM matching & alternatives
BOM lines are compared by package, parameters, quantity, and workable alternatives for cleaner sourcing decisions.
Sourcing availability signal
Stock routes, quotation confidence, lead-time notes, and shipment feasibility are checked before sales follow-up.
Buyer sourcing scenarios
Examples of how common component sourcing requests are organized.
Typical RFQ scenarios based on the WMSIC form fields, catalog data, manual review steps, and shipment preparation workflow.
The buyer shares the full part number, package requirement, quantity, destination, and available product photos so the quotation can record the exact version under review.
A multi-line BOM is organized into direct sourcing lines, lines that need package clarification, and lines where alternative-part review is permitted.
The original manufacturer part number, datasheet revision, application, critical limits, and acceptable changes are collected before possible candidates are discussed.
Sample quantity, minimum packing, package format, target date, and courier destination are kept together in one RFQ conversation.
Package photos, model markings, board context, and the quantity needed for repair help focus the sourcing review on the relevant version.
When a suffix or package note is incomplete, the response records the open difference and requests buyer confirmation before procurement proceeds.
Packing format, carton notes, invoice details, courier option, destination, and tracking handoff are coordinated around the confirmed order.
The request connects the previously used model, current demand, package evidence, target timing, and replenishment sourcing route.
Related products
Packaged components ready for RFQ.
