Model & package intelligence
Model text, package form, tray or reel details, and visual evidence are reviewed together before RFQ feedback.
ADI/LINEAR MAX3085EESA+T MAX3085EESA
Configuration
1 options
Configuration
25+
Available for RFQ
Technical data
Product details
19
specifications
Core information
- Product name
- ADI(Analog Devices) / LINEAR MAX3085EESA+T
- Type
- ADI/LINEAR
- Minimum package
- 2500 圆盘
Technical parameters
- Electronic Component
- Electronic Component
- Electronic Component
- ADI(Analog Devices) / LINEAR
- Electronic Component
- MAX3085EESA+T
- Electronic Component
- 1
- Package
- SOP-8
- Type
- Transceiver
- Electronic Component
- RS-485 / RS-422IC
- Electronic Component
- 0.213g
- Electronic Component
- 256
- Electronic Component
- 1
- Electronic Component
- BM0258809263
- Operating Temperature
- 40℃~+85℃
- Operating Voltage
- 4.75V~5.25V
- Receiver
- 1
- Data
- 500Kbps
- Communication
- Electronic Component
For datasheets, package documents, compatible-part guidance, or other technical resources, contact WMSIC customer service. Availability is confirmed case by case.
MAX3085EESA+T 产品概述
一、产品简介
MAX3085EESA+T 是一款面向工业现场总线和点对点长距离数据传输的半双工差分收发器，支持 RS-422/RS-485 通讯标准，集成 1 路驱动器和 1 路接收器。器件工作电压在 4.75V 至 5.25V 之间，适配常见 5V 系统，静态电流低至 375 μA，可用于功耗敏感的长期在线应用。器件耐环境能力强，工作温度范围为 -40℃ 到 +85℃，并提供高达 ±15kV 的静电放电（ESD）保护，提高系统可靠性。
二、主要参数与特性
- 类型：收发器（Transceiver），兼容 RS-422 / RS-485 标准
- 驱动器/接收器：1 驱动器、1 接收器，半双工通讯模式
- 电源电压：4.75V ~ 5.25V（适用于 5V 系统）
- 数据速率：最高可达 500 kbps（在典型布线条件下）
- 网络容量：支持最多 256 个节点的总线拓扑（具体节点数视网络拓扑与收发器负载而定）
- 静态电流：典型 375 μA，适合低功耗应用
- ESD 保护：±15 kV（人体模型），增强现场抗扰性
- 工作温度：-40℃ ~ +85℃，满足工业级温度要求
- 封装：SOP-8 / NSOIC-8，便于通用 PCB 布局与自动贴片生产
- 品牌：ADI (亚德诺) / Linear
三、典型应用
- 工业自动化现场总线（PLC、分布式 I/O）
- 楼宇自控与安防系统（门禁、监控传输）
- 仪器仪表与数据采集（远距离传感器网络）
- 电力与能源管理系统（能耗监控、逆变器通讯）
- 工厂通讯与工业以太网边缘设备的串行接口
四、封装与引脚功能概述
MAX3085EESA+T 提供常见的 SOP-8（NSOIC-8）封装，适合自动化贴装与批量生产。典型引脚功能包括：差分线对 A/B（驱动器差分输出/接收器差分输入）、DI（驱动器输入）、RO（接收器输出）、DE/RE（驱动器/接收器使能控制）、VCC 与 GND。具体引脚排列与电气特性请参考器件数据手册。
五、使用建议与注意事项
- 总线终端：在长线和高速通信场景下应在总线两端并联 120Ω 终端电阻以防反射。
- 偏置电阻（Fail-safe）：建议在总线上加入偏置/拉平电阻，确保在无驱动时接收器输出可定义的逻辑电平，避免噪声误触发。
- 电源滤波：VCC 旁放置 0.1 μF 陶瓷去耦电容，靠近器件电源引脚以抑制瞬态噪声。
- ESD 与浪涌保护：尽管器件有 ±15kV ESD 保护，建议在恶劣电磁环境中配合外部 TVS 二极管或共模抑制器以提高系统耐受性。
- 布线与接地：差分对走线长度匹配并保持阻抗连续，地线应低阻短接，避免地环路引入干扰。
- 功能确认：在设计前查阅官方数据手册以确认是否包含短路保护、热关断或内部 fail-safe 功能，依据系统需求增加必要保护电路。
六、采购信息与参考
- 型号：MAX3085EESA+T
- 封装：SOP-8（NSOIC-8）
- 生产厂商：ADI（Analog Devices / 原 Maxim Integrated）或 Linear 品牌线索
- 应在采购与设计阶段获取并参考厂家最新数据手册与应用说明，以确保器件参数与系统需求一致，并获取完整的引脚分配、电气规范与封装图纸。
总结：MAX3085EESA+T 面向工业级 RS-422/RS-485 半双工通信场景，具有低静态电流、宽温度范围和良好的 ESD 抗扰能力，适用于需要可靠长线差分通讯的嵌入式与工业控制系统。在设计中应结合总线终端、偏置与电源滤波等最佳实践，以保证系统稳定与通讯可靠。
Request for quote
Send RFQ
Use the form for single models, category sourcing, and multi-line BOM requirements.
Product sourcing intelligence
Model, package, availability, and BOM fit reviewed before quotation.
WMSIC turns product data, package visuals, BOM context, and sourcing signals into practical RFQ notes for buyers.
BOM matching & alternatives
BOM lines are compared by package, parameters, quantity, and workable alternatives for cleaner sourcing decisions.
Sourcing availability signal
Stock routes, quotation confidence, lead-time notes, and shipment feasibility are checked before sales follow-up.
Buyer sourcing scenarios
Examples of how common component sourcing requests are organized.
Typical RFQ scenarios based on the WMSIC form fields, catalog data, manual review steps, and shipment preparation workflow.
The buyer shares the full part number, package requirement, quantity, destination, and available product photos so the quotation can record the exact version under review.
A multi-line BOM is organized into direct sourcing lines, lines that need package clarification, and lines where alternative-part review is permitted.
The original manufacturer part number, datasheet revision, application, critical limits, and acceptable changes are collected before possible candidates are discussed.
Sample quantity, minimum packing, package format, target date, and courier destination are kept together in one RFQ conversation.
Package photos, model markings, board context, and the quantity needed for repair help focus the sourcing review on the relevant version.
When a suffix or package note is incomplete, the response records the open difference and requests buyer confirmation before procurement proceeds.
Packing format, carton notes, invoice details, courier option, destination, and tracking handoff are coordinated around the confirmed order.
The request connects the previously used model, current demand, package evidence, target timing, and replenishment sourcing route.
Related products
Packaged components ready for RFQ.
