Model & package intelligence
Model text, package form, tray or reel details, and visual evidence are reviewed together before RFQ feedback.
AVX TAJP106K010RNJ
Configuration
1 options
Configuration
25+
Available for RFQ
Technical data
Product details
20
specifications
Core information
- Product name
- AVX TAJP106K010RNJ
- Type
- AVX
- Unit
- Electronic Component
- Minimum package
- 2500 圆盘
Technical parameters
- Electronic Component
- Electronic Component
- Electronic Component
- Electronic Component
- Electronic Component
- AVX
- Electronic Component
- TAJP106K010RNJ
- Electronic Component
- 1
- Electronic Component
- 10uF
- Package
- CASE-P-2012-15(mm)
- Electronic Component
- Capacitor
- Electronic Component
- ±10%
- Electronic Component
- 0.046g
- Electronic Component
- 1
- Electronic Component
- BM0058426373
- Operating Temperature
- 55℃~+125℃
- Voltage
- 10V
- Electronic Component
- Electronic Component
- Electronic Component
- 2500
For datasheets, package documents, compatible-part guidance, or other technical resources, contact WMSIC customer service. Availability is confirmed case by case.
TAJP106K010RNJ 产品概述
一、产品简介
TAJP106K010RNJ 为 AVX 出品的钽固体电容，标称容量 10 μF，容差 ±10%，额定电压 10 V，工作温度范围 -55 ℃ 至 +125 ℃，等效串联电阻（ESR）6 Ω（@100 kHz），封装为 CASE‑P‑2012‑15（公制 2012 系列封装）。该器件以体积小、容量密度高、温度特性稳定著称，适用于对稳定电容与中低频滤波性能有要求的电源与去耦场合。
二、主要电气参数（要点）
- 容值：10 μF ±10%
- 额定电压：10 V DC
- 工作温度：-55 ℃ ～ +125 ℃
- ESR：6 Ω @ 100 kHz（用于评估在高频条件下的损耗与滤波能力）
- 封装：CASE‑P‑2012‑15（2012 公制系列，适合空间受限的表贴设计）
三、性能与可靠性特点
- 容值随温度和偏压变化小，适合需要稳定容量的电源去耦与旁路。
- 钽固体电容具有较好的长期稳定性和较低的漏电比陶瓷大电容器更可控（需参照厂方泄漏电流规格）。
- 额定电压下工作可靠性较高，但钽器件对浪涌电流和过压敏感，建议适当电压降额以提高寿命和可靠性（常见实务为按应用场景考虑 50% 降额或遵循 AVX 推荐）。
- 在高频条件下 ESR 能提供一定阻尼，利于抑制振荡，但若需极低 ESR 或更高频滤波性能，可考虑并联低ESR的陶瓷电容。
四、典型应用场景
- DC‑DC 转换器输入/输出滤波与稳压电源去耦
- 数字供电轨的旁路与瞬态响应缓冲
- 通信设备和工业控制中对中等容量、稳定性要求高的电源回路
- 在空间受限但需保持较大电容量的便携设备和模块化电源设计
五、安装与使用建议
- 遵循 AVX 推荐的回流焊曲线进行焊接，避免超温和长时间热应力。
- 设计 PCB 时注意焊盘尺寸与焊料量匹配，合理安排电流路径和散热。
- 对于可能出现启动浪涌或短时过压的应用，应增加限流元件或串联电阻/熔断保护；在关键场合考虑采用额外的前置保护（如 NTC、熔丝或限流电阻）。
- 储存与贴装前保持干燥，按厂家说明进行必要的回流前干燥或预处理（若适用）。
六、选型与替代建议
- 若需更低 ESR 或更好高频性能，可在并联陶瓷电容来补偿瞬态响应与降低整体 ESR。
- 对极端高温或高可靠性航天/汽车级应用，请核对 AVX 的可靠性等级与加速寿命试验数据，必要时选择相应 AEC‑Q 等级或高可靠版本。
- 作为体积与容量的折衷，钽电容在空间受限且对稳态容量要求高的场合优于铝电解，但在预算或耐浪涌性上需评估替代方案。
总结：TAJP106K010RNJ 提供了在 2012 封装内较大容量与稳定电气特性的组合，适合一般工业与通信电源去耦及滤波场景。设计时重视回流焊工艺、合理降额和浪涌保护，可发挥其性能并保证长期稳定运行。若需更详细的电气曲线、封装尺寸与焊接参数，建议参照 AVX 官方数据手册。
Request for quote
Send RFQ
Use the form for single models, category sourcing, and multi-line BOM requirements.
Product sourcing intelligence
Model, package, availability, and BOM fit reviewed before quotation.
WMSIC turns product data, package visuals, BOM context, and sourcing signals into practical RFQ notes for buyers.
BOM matching & alternatives
BOM lines are compared by package, parameters, quantity, and workable alternatives for cleaner sourcing decisions.
Sourcing availability signal
Stock routes, quotation confidence, lead-time notes, and shipment feasibility are checked before sales follow-up.
Buyer sourcing scenarios
Examples of how common component sourcing requests are organized.
Typical RFQ scenarios based on the WMSIC form fields, catalog data, manual review steps, and shipment preparation workflow.
The buyer shares the full part number, package requirement, quantity, destination, and available product photos so the quotation can record the exact version under review.
A multi-line BOM is organized into direct sourcing lines, lines that need package clarification, and lines where alternative-part review is permitted.
The original manufacturer part number, datasheet revision, application, critical limits, and acceptable changes are collected before possible candidates are discussed.
Sample quantity, minimum packing, package format, target date, and courier destination are kept together in one RFQ conversation.
Package photos, model markings, board context, and the quantity needed for repair help focus the sourcing review on the relevant version.
When a suffix or package note is incomplete, the response records the open difference and requests buyer confirmation before procurement proceeds.
Packing format, carton notes, invoice details, courier option, destination, and tracking handoff are coordinated around the confirmed order.
The request connects the previously used model, current demand, package evidence, target timing, and replenishment sourcing route.
Related products
Packaged components ready for RFQ.
