Model & package intelligence
Model text, package form, tray or reel details, and visual evidence are reviewed together before RFQ feedback.
AVX TAJR106M010RNJ
Configuration
1 options
Configuration
26+
Available for RFQ
Technical data
Product details
20
specifications
Core information
- Product name
- AVX TAJR106M010RNJ
- Type
- AVX
- Unit
- Electronic Component
- Minimum package
- 2500 圆盘
Technical parameters
- Electronic Component
- Electronic Component
- Electronic Component
- Electronic Component
- Electronic Component
- AVX
- Electronic Component
- TAJR106M010RNJ
- Electronic Component
- 1
- Electronic Component
- 10uF
- Package
- CASE-R-2012-15(mm)
- Electronic Component
- Capacitor
- Electronic Component
- ±20%
- Electronic Component
- 0.026g
- Electronic Component
- 1
- Electronic Component
- BM0249824469
- Operating Temperature
- 55℃~+125℃
- Voltage
- 10V
- Electronic Component
- Electronic Component
- Electronic Component
- 2500
For datasheets, package documents, compatible-part guidance, or other technical resources, contact WMSIC customer service. Availability is confirmed case by case.
TAJR106M010RNJ 产品概述
一、产品概况与关键参数
TAJR106M010RNJ 是 AVX 出品的钽电容器，额定电容量为 10 μF，公差 ±20%，额定电压 10 V。工作温度范围宽：-55 ℃ 至 +125 ℃，在 100 kHz 条件下等效串联电阻（ESR）为 6 Ω。封装标注为 CASE‑R‑2012‑15 (mm)，适合空间受限的贴装场合。该型号定位于对体积、温度稳定性有一定要求的电源去耦与滤波应用。
二、主要特性与性能优势
- 稳定的容量随温度和频率变化较小，适合在宽温区间使用。
- 紧凑封装便于高密度 PCB 布局，适合移动设备、嵌入式系统等。
- 对瞬态噪声和高频纹波具有良好抑制作用，100 kHz 条件下 ESR 为 6 Ω，可用于中低频去耦与滤波。
- 钽材料本身具有较高的可靠性与寿命，但对电流冲击、反向极性敏感，需在电路设计中采取相应保护措施。
三、典型应用场景
- 电源去耦与稳压器输出旁路（尤其是对稳定性要求高的小电流轨）。
- 数字电路、MCU、ADC/DAC 的局部去耦与滤波。
- 通信模块、传感器接口、电池供电设备中的噪声抑制。
- 对体积、温度范围有要求的工业与消费类电子产品。
四、选型与使用注意事项
- 极性：钽电容为极性器件，装配时必须注意正负极方向，避免反向电压。
- 压降与去耦：为提高可靠性，建议对钽电容进行电压去耦（降额），一般推荐工作电压在额定电压的 50%~80% 范围；若对可靠性有严格要求，可采用 50% 的更保守降额（即本件在 ≤5 V 下使用）。
- 冲击电流保护：钽电容对浪涌电流较敏感，建议在可能出现大浪涌或短时充电电流的场合串联限流电阻或配合熔断/保险元件。
- 焊接与存储：遵循供应商的回流焊温度曲线和湿热存储要求，避免长时间潮湿环境暴露，防止焊接裂纹与性能退化。
- 清洗与维护：避免使用强溶剂或高压清洗，必要时采用推荐的温和清洗流程并彻底烘干。
五、可靠性建议与替代选择
- 在设计阶段对可能的最大峰值充电电流和反向电压进行评估，必要时增加保护电路（限流、电阻、二极管）。
- 若应用对 ESR 有更严格要求，可考虑低 ESR 的固态钽或陶瓷电容作为替代；若对容值稳定性和漏电流更敏感，可咨询 AVX 其他系列或查看同规格数据手册以选择最合适型号。
总结：TAJR106M010RNJ 提供了小体积下稳定的 10 μF 容量与宽温工作能力，适合中低频去耦与滤波场合。合理的电压降额、冲击电流保护与正确的焊接工艺是保证长期可靠性的重要措施。如需精确电气参数、封装尺寸和焊接曲线，请参照 AVX 官方数据手册或联系供应商获取完整技术资料。
Request for quote
Send RFQ
Use the form for single models, category sourcing, and multi-line BOM requirements.
Product sourcing intelligence
Model, package, availability, and BOM fit reviewed before quotation.
WMSIC turns product data, package visuals, BOM context, and sourcing signals into practical RFQ notes for buyers.
BOM matching & alternatives
BOM lines are compared by package, parameters, quantity, and workable alternatives for cleaner sourcing decisions.
Sourcing availability signal
Stock routes, quotation confidence, lead-time notes, and shipment feasibility are checked before sales follow-up.
Buyer sourcing scenarios
Examples of how common component sourcing requests are organized.
Typical RFQ scenarios based on the WMSIC form fields, catalog data, manual review steps, and shipment preparation workflow.
The buyer shares the full part number, package requirement, quantity, destination, and available product photos so the quotation can record the exact version under review.
A multi-line BOM is organized into direct sourcing lines, lines that need package clarification, and lines where alternative-part review is permitted.
The original manufacturer part number, datasheet revision, application, critical limits, and acceptable changes are collected before possible candidates are discussed.
Sample quantity, minimum packing, package format, target date, and courier destination are kept together in one RFQ conversation.
Package photos, model markings, board context, and the quantity needed for repair help focus the sourcing review on the relevant version.
When a suffix or package note is incomplete, the response records the open difference and requests buyer confirmation before procurement proceeds.
Packing format, carton notes, invoice details, courier option, destination, and tracking handoff are coordinated around the confirmed order.
The request connects the previously used model, current demand, package evidence, target timing, and replenishment sourcing route.
Related products
Packaged components ready for RFQ.
