Model & package intelligence
Model text, package form, tray or reel details, and visual evidence are reviewed together before RFQ feedback.
AVX TPSC107K010R0075
Configuration
1 options
Configuration
25+
Available for RFQ
Technical data
Product details
19
specifications
Core information
- Product name
- AVX TPSC107K010R0075
- Type
- AVX
- Minimum package
- 500 圆盘
Technical parameters
- Electronic Component
- Electronic Component
- Electronic Component
- AVX
- Electronic Component
- TPSC107K010R0075
- Electronic Component
- 1
- Electronic Component
- 100uF
- Package
- SMD
- Electronic Component
- Capacitor
- Electronic Component
- ±10%
- Electronic Component
- 0.3g
- Electronic Component
- 1
- Electronic Component
- BM0257629082
- Operating Temperature
- 55℃~+125℃
- Voltage
- 10V
- Electronic Component
- Electronic Component
- Electronic Component
- 500
- Resistor(ESR)
- 75mΩ@100kHz
For datasheets, package documents, compatible-part guidance, or other technical resources, contact WMSIC customer service. Availability is confirmed case by case.
TPSC107K010R0075 产品概述
一、产品简介
TPSC107K010R0075 为 AVX 出品的表面贴装钽电容，容量 100 µF，精度 ±10%，额定电压 10 V，等效串联电阻（ESR）为 75 mΩ（测量频率 100 kHz），工作温度范围 -55 ℃ 至 +125 ℃。封装为 SMD CASE‑C‑6032（常见工业贴片尺寸），为极性器件（注意正负极标识）。
二、主要特性
- 高体积容值：钽电容在相同体积下具有较大的电容量，适合对体积敏感的电源旁路和储能场合。
- 低 ESR：75 mΩ（100 kHz）属于较低水平，有利于高频旁路和降低纹波电压。
- 宽温度范围：-55 ℃ 至 +125 ℃，适应工业级工作环境。
- 稳定度好：在温度和频率范围内容量变化小，适合对滤波稳定性有要求的电源设计。
- SMD 封装：便于自动贴装和大批量生产。
三、典型应用
- 开关电源输出侧的滤波与去耦。
- 低压电源总线的能量储备与瞬态响应改善。
- 通信、计算设备与工业控制板上对瞬态电流的缓冲。
- 对体积和可靠性有一定要求的消费电子和仪器设备电源设计。
四、设计与使用建议
- 极性注意：钽电容为极性器件，务必按照极性焊装；反向电压会导致损坏甚至发生短路。
- 电压降额：为提高可靠性，建议在设计中对额定电压进行适当降额（根据系统可靠性要求常见做法在 50%–80% 范围内选择）。
- 浪涌与涌流保护：钽电容对浪涌电流和过压较敏感，电源上电和开关瞬态应考虑限制涌流（串联限流电阻或预充电），关键场合建议配置熔断器或限流元件。
- 布局与散热：将器件放置在近负载/稳压器的位置以缩短回流路径；避免在 PCB 受机械应力区域回流焊后产生裂纹。
- 焊接工艺：遵循 AVX 推荐的回流曲线和清洗工艺（常见无铅回流峰值温度约 250–260 ℃，但以厂家资料为准）。
五、可靠性与选型注意
- 故障模式：钽电容在遭受过压或大涌流时可能呈现低阻短路，严重情况下会热失控；因此关键应用需采取额外保护措施。
- 参数核对：除 ESR、容量与温度范围外，请向 AVX 数据表查证漏电流、额定寿命、纹波电流及冲击/振动等可靠性指标，以便做最终选型。
- 替代方案：若系统要求极高的浪涌容忍度或更低漏电，可考虑固体聚合物钽、电解电容或多层陶瓷电容（MLCC）作为补充或替代，依据具体电源特性与成本权衡。
六、结论与采购建议
TPSC107K010R0075（AVX，100 µF，±10%，10 V，ESR 75 mΩ@100 kHz，CASE‑C‑6032）适合需要较大体积容值与低 ESR 的中低压电源滤波与去耦场合。最终纳入设计前，请务必查阅 AVX 官方数据手册，确认漏电流、纹波电流、寿命测试与回流曲线等完整参数，并根据系统对可靠性的要求采取电压降额与浪涌保护措施。若需进一步匹配替代品或进行电路级建议，可提供应用场景与电源参数以便评估。
Request for quote
Send RFQ
Use the form for single models, category sourcing, and multi-line BOM requirements.
Product sourcing intelligence
Model, package, availability, and BOM fit reviewed before quotation.
WMSIC turns product data, package visuals, BOM context, and sourcing signals into practical RFQ notes for buyers.
BOM matching & alternatives
BOM lines are compared by package, parameters, quantity, and workable alternatives for cleaner sourcing decisions.
Sourcing availability signal
Stock routes, quotation confidence, lead-time notes, and shipment feasibility are checked before sales follow-up.
Buyer sourcing scenarios
Examples of how common component sourcing requests are organized.
Typical RFQ scenarios based on the WMSIC form fields, catalog data, manual review steps, and shipment preparation workflow.
The buyer shares the full part number, package requirement, quantity, destination, and available product photos so the quotation can record the exact version under review.
A multi-line BOM is organized into direct sourcing lines, lines that need package clarification, and lines where alternative-part review is permitted.
The original manufacturer part number, datasheet revision, application, critical limits, and acceptable changes are collected before possible candidates are discussed.
Sample quantity, minimum packing, package format, target date, and courier destination are kept together in one RFQ conversation.
Package photos, model markings, board context, and the quantity needed for repair help focus the sourcing review on the relevant version.
When a suffix or package note is incomplete, the response records the open difference and requests buyer confirmation before procurement proceeds.
Packing format, carton notes, invoice details, courier option, destination, and tracking handoff are coordinated around the confirmed order.
The request connects the previously used model, current demand, package evidence, target timing, and replenishment sourcing route.
Related products
Packaged components ready for RFQ.
1 Piece BGA Integrated Circuit Chipset MN864739 CXD90061GG CXD90062GG PS5 QFN-80
- Model
- MN864739
- Package
