Model & package intelligence
Model text, package form, tray or reel details, and visual evidence are reviewed together before RFQ feedback.
AISHI EWH1VM100D11OT
Configuration
1 options
Configuration
26+
Available for RFQ
Technical data
Product details
19
specifications
Core information
- Product name
- AISHI EWH1VM100D11OT
- Type
- AISHI
- Minimum package
- 1000 圆盘
Technical parameters
- Electronic Component
- Electronic Component
- Electronic Component
- AISHI
- Electronic Component
- EWH1VM100D11OT
- Electronic Component
- 1
- Electronic Component
- 10uF
- Package
- Through-hole, D5x L11mm
- Electronic Component
- Through-hole Aluminum Electrolytic Capacitor
- Electronic Component
- ±20%
- Electronic Component
- 0.406g
- Pitch
- 2mm
- Electronic Component
- 1
- Electronic Component
- BM0265139991
- Voltage
- 35V
- Capacitor
- 5mm
- Capacitor
- 11mm
- Electronic Component
- Electronic Component
For datasheets, package documents, compatible-part guidance, or other technical resources, contact WMSIC customer service. Availability is confirmed case by case.
EWH1VM100D11OT 直插铝电解电容产品概述
一、产品基本信息
EWH1VM100D11OT是艾华集团（AISHI） 推出的通用型径向直插铝电解电容，针对小型化、低中压电路设计优化，兼顾成本与可靠性，广泛适配消费电子、工业控制等领域的基础滤波、耦合需求。产品定位为“小体积高密度电路专用电容”，核心是平衡空间占用与电气性能。
二、核心电气性能参数
该电容的关键指标明确，满足多数常规电路设计要求：
- 额定容值：10μF（微法），容值精度±20%（通用型电容典型精度，适用于非高精度滤波场景）；
- 额定电压：35V DC（直流电压），可稳定工作在低中压电路，避免过压击穿；
- 温度范围：-40℃~+105℃（工业级温度区间），能适应户外、高低温交替环境；
- 损耗角正切（tanδ）：典型值≤0.12（1kHz、20℃测试），损耗低，滤波效率较好；
- 漏电流：≤0.01CV μA（C=容值μF，V=额定电压V），常规环境下漏电流稳定，减少电路功耗。
三、物理结构与封装特性
采用紧凑径向直插封装，适配小型化PCB布局：
- 引脚规格：径向直插（插件式），脚间距2mm（远小于常规5mm脚距），显著节省PCB空间；
- 电容体尺寸：直径5mm（D5）×长度11mm（L11），体积小巧，适合高密度模块；
- 引脚材质：镀锡铜芯，抗氧化性优异，焊接时不易虚焊、脱焊；
- 外壳工艺：铝制卷绕外壳+防腐蚀处理，内部电解液封装稳定，防止漏液。
四、典型应用场景
基于参数特性，适用于以下场景：
- 消费电子：小型家电（加湿器、智能台灯控制板）、便携式音频（音箱/耳机电源滤波）；
- 工业控制：小型PLC信号滤波、传感器接口耦合、低压电源输出滤波；
- 汽车辅助电路：车载USB充电滤波、车内小功率传感器信号处理（需确认环境≤105℃）；
- 通信终端：小型路由器、智能交换机电源滤波、Wi-Fi模块信号耦合。
五、品牌与可靠性优势
作为艾华成熟产品，具备可靠质量保障：
- 品牌背书：艾华是国内铝电解电容龙头，拥有铝箔→电容的完整产业链，技术积累深厚；
- 标准合规：符合GB/T 14472、IEC 60384-1等国内外标准；
- 寿命验证：105℃下1000小时高温测试，容值变化≤±20%、损耗变化≤50%、漏电流≤初始150%；
- 批量一致性：生产工艺稳定，批次参数偏差小，适合大规模量产。
六、选型与使用注意事项
为确保性能稳定，需注意：
- 电压降额：实际工作电压≤额定电压80%（即28V以下），避免过压老化；
- 温度控制：长期工作温度≤105℃，高温环境需增加散热；
- 焊接工艺：波峰焊≤260℃（10秒内）、手工焊≤350℃（3秒内），防止高温损坏；
- 极性识别：短脚/色环端为负极，反接会导致电容损坏甚至爆炸，需严格匹配PCB极性。
该电容以“小体积、高可靠性”为核心优势，是小型化电路设计的实用选择。
Request for quote
Send RFQ
Use the form for single models, category sourcing, and multi-line BOM requirements.
Product sourcing intelligence
Model, package, availability, and BOM fit reviewed before quotation.
WMSIC turns product data, package visuals, BOM context, and sourcing signals into practical RFQ notes for buyers.
BOM matching & alternatives
BOM lines are compared by package, parameters, quantity, and workable alternatives for cleaner sourcing decisions.
Sourcing availability signal
Stock routes, quotation confidence, lead-time notes, and shipment feasibility are checked before sales follow-up.
Buyer sourcing scenarios
Examples of how common component sourcing requests are organized.
Typical RFQ scenarios based on the WMSIC form fields, catalog data, manual review steps, and shipment preparation workflow.
The buyer shares the full part number, package requirement, quantity, destination, and available product photos so the quotation can record the exact version under review.
A multi-line BOM is organized into direct sourcing lines, lines that need package clarification, and lines where alternative-part review is permitted.
The original manufacturer part number, datasheet revision, application, critical limits, and acceptable changes are collected before possible candidates are discussed.
Sample quantity, minimum packing, package format, target date, and courier destination are kept together in one RFQ conversation.
Package photos, model markings, board context, and the quantity needed for repair help focus the sourcing review on the relevant version.
When a suffix or package note is incomplete, the response records the open difference and requests buyer confirmation before procurement proceeds.
Packing format, carton notes, invoice details, courier option, destination, and tracking handoff are coordinated around the confirmed order.
The request connects the previously used model, current demand, package evidence, target timing, and replenishment sourcing route.
Related products
Packaged components ready for RFQ.
1 Piece Integrated Circuit for IRS20124S IRS21956S SOP-20 IRS2453DS SOP-14
- Model
- IRS20124S
- Package
