Model & package intelligence
Model text, package form, tray or reel details, and visual evidence are reviewed together before RFQ feedback.
AISHI ERZ1EM471G13OT
Configuration
1 options
Configuration
26+
Available for RFQ
Technical data
Product details
19
specifications
Core information
- Product name
- AISHI ERZ1EM471G13OT
- Type
- AISHI
- Minimum package
- 250 圆盘
Technical parameters
- Electronic Component
- Electronic Component
- Electronic Component
- AISHI
- Electronic Component
- ERZ1EM471G13OT
- Electronic Component
- 1
- Electronic Component
- 470uF
- Package
- Through-hole, D10x L13mm
- Electronic Component
- Through-hole Aluminum Electrolytic Capacitor
- Electronic Component
- ±20%
- Electronic Component
- 1.628g
- Pitch
- 5mm
- Electronic Component
- 1
- Electronic Component
- BM0265106822
- Electronic Component
- 10000hrs@105℃
- Voltage
- 25V
- Capacitor
- 10mm
- Capacitor
- 13mm
For datasheets, package documents, compatible-part guidance, or other technical resources, contact WMSIC customer service. Availability is confirmed case by case.
ERZ1EM471G13OT 直插铝电解电容产品概述
一、核心电气参数
ERZ1EM471G13OT为直插铝电解电容，核心电气参数精准匹配中低压电路的滤波、储能需求：
- 标称容值：470微法（μF），对应编码“471”（10¹次方），满足多数电路的基础容值要求；
- 容值精度：±20%，符合工业级电容常规精度标准，适配非高精度场景（如电源滤波、耦合）；
- 额定电压：25V DC，适用于12V/24V等低压直流系统，避免过压击穿风险；
- 工作温度范围：-40℃~+105℃（基于105℃寿命测试），覆盖宽温环境应用。
二、机械封装与尺寸
该电容采用通孔直插式封装，尺寸紧凑适配标准PCB设计：
- 引脚间距：5mm，与常规插件电容脚距一致，便于PCB布局优化；
- 电容体尺寸：直径（D）10mm×长度（L）13mm，体积小巧，可在有限空间内集成；
- 引脚特性：标准镀锡直插引脚，焊接性良好，支持波峰焊、手工焊等工艺，无虚焊风险。
三、性能特点与优势
- 高温寿命优异：105℃环境下额定寿命达10000小时，远高于普通电解电容（通常2000~5000hrs@105℃），适合长期工作于高温区域（如电源模块内部）；
- 低阻抗滤波：采用优化铝箔腐蚀工艺与耐温电解液，等效串联电阻（ESR）低，可有效降低电路纹波，提升电源输出稳定性；
- 容值一致性好：±20%精度经艾华标准化生产管控，批量产品性能波动小，减少电路调试复杂度；
- 环保合规：符合RoHS 2.0、REACH等国际环保标准，无铅无镉，适配绿色电子产品设计。
四、典型应用场景
ERZ1EM471G13OT因参数适配性强，广泛应用于以下领域：
- 电源系统：开关电源、线性电源的输出滤波/储能；车载充电器、LED驱动电源的低压滤波；
- 消费电子：液晶电视、显示器、机顶盒的电源模块滤波；音响设备的音频耦合/滤波；
- 工业控制：PLC（可编程逻辑控制器）、变频器、伺服驱动器的辅助电源滤波；
- 通信设备：路由器、交换机的直流电源模块滤波。
五、可靠性与品质保障
艾华集团针对该电容的可靠性设计包含：
- 寿命验证：105℃、额定电压下持续测试10000小时，容值衰减≤20%，漏电流≤初始值1.5倍，满足长期使用需求；
- 工艺管控：采用高精度铝箔腐蚀技术提升比容，自主研发耐高压电解液增强高温稳定性，引脚镀锡防止氧化；
- 认证背书：通过ISO 9001、IATF 16949（汽车级）等质量管理体系认证，产品一致性与可靠性有保障。
六、品牌优势
该电容由艾华集团（AISHI） 生产，艾华是国内铝电解电容龙头企业，拥有30余年专业经验，产能覆盖全球。其严格的原材料管控（进口铝箔、自主电解液）与自动化生产流程，确保每批次产品性能稳定，可满足客户批量采购需求。
注：具体应用需结合电路纹波电流、电压波动等实际条件，建议参考艾华官方 datasheet 确认详细参数。
Request for quote
Send RFQ
Use the form for single models, category sourcing, and multi-line BOM requirements.
Product sourcing intelligence
Model, package, availability, and BOM fit reviewed before quotation.
WMSIC turns product data, package visuals, BOM context, and sourcing signals into practical RFQ notes for buyers.
BOM matching & alternatives
BOM lines are compared by package, parameters, quantity, and workable alternatives for cleaner sourcing decisions.
Sourcing availability signal
Stock routes, quotation confidence, lead-time notes, and shipment feasibility are checked before sales follow-up.
Buyer sourcing scenarios
Examples of how common component sourcing requests are organized.
Typical RFQ scenarios based on the WMSIC form fields, catalog data, manual review steps, and shipment preparation workflow.
The buyer shares the full part number, package requirement, quantity, destination, and available product photos so the quotation can record the exact version under review.
A multi-line BOM is organized into direct sourcing lines, lines that need package clarification, and lines where alternative-part review is permitted.
The original manufacturer part number, datasheet revision, application, critical limits, and acceptable changes are collected before possible candidates are discussed.
Sample quantity, minimum packing, package format, target date, and courier destination are kept together in one RFQ conversation.
Package photos, model markings, board context, and the quantity needed for repair help focus the sourcing review on the relevant version.
When a suffix or package note is incomplete, the response records the open difference and requests buyer confirmation before procurement proceeds.
Packing format, carton notes, invoice details, courier option, destination, and tracking handoff are coordinated around the confirmed order.
The request connects the previously used model, current demand, package evidence, target timing, and replenishment sourcing route.
Related products
Packaged components ready for RFQ.
