Model & package intelligence
Model text, package form, tray or reel details, and visual evidence are reviewed together before RFQ feedback.
AISHI ERH2GM820L25OT
Configuration
1 options
Configuration
26+
Available for RFQ
Technical data
Product details
19
specifications
Core information
- Product name
- AISHI ERH2GM820L25OT
- Type
- AISHI
- Minimum package
- 250 袋装
Technical parameters
- Electronic Component
- Electronic Component
- Electronic Component
- AISHI
- Electronic Component
- ERH2GM820L25OT
- Electronic Component
- 1
- Electronic Component
- 82uF
- Package
- Through-hole, D16x L25mm
- Electronic Component
- Through-hole Aluminum Electrolytic Capacitor
- Electronic Component
- ±20%
- Electronic Component
- 8g
- Pitch
- 7.5mm
- Electronic Component
- 1
- Electronic Component
- BM0264223647
- Electronic Component
- 3000hrs@105℃
- Voltage
- 400V
- Capacitor
- 16mm
- Capacitor
- 25mm
For datasheets, package documents, compatible-part guidance, or other technical resources, contact WMSIC customer service. Availability is confirmed case by case.
ERH2GM820L25OT 产品概述
一、产品简介
ERH2GM820L25OT 为 AISHI（艾华集团）出品的直插式铝电解电容器，属于插件径向引脚封装，设计用于对体积、耐压和使用寿命有明确要求的电源与工业电子设备。该器件以稳定的容量与高温寿命为特点，适合工业级电源滤波、耦合与旁路等场合。
二、主要参数
- 容量：82 μF
- 容差：±20%
- 额定电压：400 V DC
- 引脚间距：7.5 mm（插件）
- 电容体尺寸：直径 D16 mm × 长度 L25 mm
- 安装形式：直插（插件）
- 工作寿命：3000 小时 @ 105 ℃
- 品牌：AISHI（艾华集团）
型号标识：ERH2GM820L25OT
三、特点与优势
- 体积小、能量密度高：D16×L25 的紧凑外形在高压应用中提供较大的容量/体积比，便于在受限空间内布局。
- 高温长期可靠性：3000 hrs@105℃ 的寿命等级，适合要求长期耐热的工业电子应用。
- 插件结构：常温焊接与维修方便，适用于手工装配或波峰焊流程的传统线路板。
- 稳定的容量与电气性能：在额定条件下保持良好滤波与旁路性能，满足一般开关电源与整流滤波需求。
四、典型应用场景
- 开关电源（SMPS）输入/输出滤波
- 工业控制电源与驱动电路
- 商用与民用高压直流供电模块
- 功率放大器、整流器及滤波网络
- 需要高温耐受与长期稳定性的电子设备
五、选型与使用建议
- 极性注意：铝电解电容器为极性器件，电路设计与安装时务必保证正负极性连接正确，反接会导致击穿或爆裂。
- 电压余量：虽然器件额定 400V，但建议在高可靠性应用中适当降额使用（例如按应用环境和厂商推荐进行电压/温升评估），以延长寿命并降低失效风险。
- 纹波与温升：合理评估纹波电流和散热条件，避免在高纹波下长时间工作导致电容体温度上升，缩短寿命。
- 焊接与装配：遵循厂商关于波峰/手工焊接温度与时间的建议，避免过热影响电解质与密封性能。插件安装时确保引脚牢固、垂直，焊点可靠。
六、存储、可靠性与质量保证
- 存储条件：建议在干燥、避光、温度适中环境存放，避免长期潮湿与高温导致密封件老化。
- 可靠性说明：3000hrs@105℃ 的寿命等级表明在高温极限下器件仍能维持基本电气性能，实际寿命受使用电压、纹波电流和环境温度影响。
- 检测建议：出货与入厂检验时可关注电容容量、等效串联电阻（ESR）及漏电流等关键参数，以确认性能符合设计要求。
如需更详细的电气特性（如 ESR、最大纹波电流、漏电流随温度的变化曲线、耐压测试和焊接工艺参数），建议联系 AISHI 官方技术支持或索取该型号的完整规格书以便精确设计与可靠性评估。
Request for quote
Send RFQ
Use the form for single models, category sourcing, and multi-line BOM requirements.
Product sourcing intelligence
Model, package, availability, and BOM fit reviewed before quotation.
WMSIC turns product data, package visuals, BOM context, and sourcing signals into practical RFQ notes for buyers.
BOM matching & alternatives
BOM lines are compared by package, parameters, quantity, and workable alternatives for cleaner sourcing decisions.
Sourcing availability signal
Stock routes, quotation confidence, lead-time notes, and shipment feasibility are checked before sales follow-up.
Buyer sourcing scenarios
Examples of how common component sourcing requests are organized.
Typical RFQ scenarios based on the WMSIC form fields, catalog data, manual review steps, and shipment preparation workflow.
The buyer shares the full part number, package requirement, quantity, destination, and available product photos so the quotation can record the exact version under review.
A multi-line BOM is organized into direct sourcing lines, lines that need package clarification, and lines where alternative-part review is permitted.
The original manufacturer part number, datasheet revision, application, critical limits, and acceptable changes are collected before possible candidates are discussed.
Sample quantity, minimum packing, package format, target date, and courier destination are kept together in one RFQ conversation.
Package photos, model markings, board context, and the quantity needed for repair help focus the sourcing review on the relevant version.
When a suffix or package note is incomplete, the response records the open difference and requests buyer confirmation before procurement proceeds.
Packing format, carton notes, invoice details, courier option, destination, and tracking handoff are coordinated around the confirmed order.
The request connects the previously used model, current demand, package evidence, target timing, and replenishment sourcing route.
Related products
Packaged components ready for RFQ.
1 Piece BGA Integrated Circuit Chipset MN864739 CXD90061GG CXD90062GG PS5 QFN-80
- Model
- MN864739
- Package
