Model & package intelligence
Model text, package form, tray or reel details, and visual evidence are reviewed together before RFQ feedback.
AISHI EGS2GM150G16OT
Configuration
1 options
Configuration
25+
Available for RFQ
Technical data
Product details
19
specifications
Core information
- Product name
- AISHI EGS2GM150G16OT
- Type
- AISHI
- Minimum package
- 250 袋
Technical parameters
- Electronic Component
- Electronic Component
- Electronic Component
- AISHI
- Electronic Component
- EGS2GM150G16OT
- Electronic Component
- 1
- Electronic Component
- 15uF
- Package
- Through-hole, D10x L16mm
- Electronic Component
- Through-hole Aluminum Electrolytic Capacitor
- Electronic Component
- ±20%
- Electronic Component
- 2.276g
- Pitch
- 5mm
- Electronic Component
- 1
- Electronic Component
- BM0259484726
- Operating Temperature
- 40℃~+105℃
- Voltage
- 400V
- Capacitor
- 10mm
- Capacitor
- 16mm
For datasheets, package documents, compatible-part guidance, or other technical resources, contact WMSIC customer service. Availability is confirmed case by case.
EGS2GM150G16OT — AISHI（艾华）直插铝电解电容产品概述
一、产品简介
EGS2GM150G16OT 为 AISHI（艾华集团）推出的一款径向引线（直插）铝电解电容，规格为 15µF ±20%，额定电压 400V。电容体尺寸 D10 × L16mm，脚间距 5mm，工作温度范围 -40℃～+105℃。该器件适用于需要高工作电压、体积小、安装方便的直流滤波与能量储存场合。
二、主要参数（关键规格）
- 容值：15µF ±20%
- 额定电压：400V DC
- 工作温度：-40℃ ～ +105℃
- 机身尺寸：直径 10mm，长度 16mm（D10×L16）
- 引脚间距：5mm（径向引线）
- 封装形式：径向插件（直插）
- 品牌：AISHI（艾华集团）
三、产品特点
- 小型化：10×16mm 的紧凑体积，适合高密度 PCB 布局与空间受限的电源模块。
- 高电压承受能力：400V 额定电压满足中高压电源滤波、直流链路应用需求。
- 宽温度适应性：-40℃ 至 +105℃ 的工作范围，适合多种工业与消费类环境。
- 插件结构：径向引线便于手工或波峰焊装配，适合传统通孔装配工艺。
- 良好的容量稳定性：±20% 公差满足多数滤波与耦合用途的容值要求。
四、典型应用
- 开关电源（SMPS）输入/输出滤波与直流链路。
- LED 驱动与电子镇流器的高压滤波。
- 工业电源、仪器仪表与逆变器的电能存储与滤波。
- 其他需在 400V 级别下实现高密度滤波的小型化电路。
五、使用与可靠性建议
- 极性注意：铝电解电容为极性器件，必须正确连接正负极，避免反向电压。
- 纹波电流与散热：请参考电路中的纹波电流要求并留足散热空间，长时间超额纹波将缩短寿命。
- 温度降额：在高温工作时应考虑适当降额使用以延长寿命，尽量靠近中点温度区域布置。
- 焊接与安装：采用规范通孔焊接工艺，避免长时间高温直烤；插件安装时注意引脚与板间距，保证机械强度。
- 存储条件：避光、常温、干燥环境存放，防止电解质泄漏或性能退化。
六、选型与采购提示
- 若电路存在较大纹波或需要更长寿命，可考虑提升容值或选择更高额定温度/寿命等级的型号。
- 下单时确认封装 D10×L16 与脚间距 5mm 是否与 PCB 设计匹配，并核对电容极性标识。
- 如需替代或批量供应，可联系 AISHI（艾华）官方渠道获取完整规格书与生命周期支持。
本产品以其高电压等级、小体积与通用插件形式，适合在空间受限但要求稳压滤波的应用中替换使用。如需更详细的电气特性（如 ESR、纹波电流随频率/温度的曲线）或可靠性测试数据，建议索取 AISHI 官方规格书与试样验证。
Request for quote
Send RFQ
Use the form for single models, category sourcing, and multi-line BOM requirements.
Product sourcing intelligence
Model, package, availability, and BOM fit reviewed before quotation.
WMSIC turns product data, package visuals, BOM context, and sourcing signals into practical RFQ notes for buyers.
BOM matching & alternatives
BOM lines are compared by package, parameters, quantity, and workable alternatives for cleaner sourcing decisions.
Sourcing availability signal
Stock routes, quotation confidence, lead-time notes, and shipment feasibility are checked before sales follow-up.
Buyer sourcing scenarios
Examples of how common component sourcing requests are organized.
Typical RFQ scenarios based on the WMSIC form fields, catalog data, manual review steps, and shipment preparation workflow.
The buyer shares the full part number, package requirement, quantity, destination, and available product photos so the quotation can record the exact version under review.
A multi-line BOM is organized into direct sourcing lines, lines that need package clarification, and lines where alternative-part review is permitted.
The original manufacturer part number, datasheet revision, application, critical limits, and acceptable changes are collected before possible candidates are discussed.
Sample quantity, minimum packing, package format, target date, and courier destination are kept together in one RFQ conversation.
Package photos, model markings, board context, and the quantity needed for repair help focus the sourcing review on the relevant version.
When a suffix or package note is incomplete, the response records the open difference and requests buyer confirmation before procurement proceeds.
Packing format, carton notes, invoice details, courier option, destination, and tracking handoff are coordinated around the confirmed order.
The request connects the previously used model, current demand, package evidence, target timing, and replenishment sourcing route.
Related products
Packaged components ready for RFQ.
