WMSIC Electronic Components

BOURNS SMBJ36CA-Q

ModelSMBJ36CA-Q
PackageSMB(DO-214AA)
BrandBOURNS
Price Price on request Electronic component prices change quickly with market supply and demand. Please refer to the latest WMSIC quotation for current pricing.
Configuration
1 options
Configuration 23+

Available for RFQ

Technical data

Product details

20 specifications

Core information

Product name
BOURNS SMBJ36CA-Q
Type
BOURNS
Unit
Electronic Component
Minimum package
3000 圆盘

Technical parameters

Electronic Component
Electronic Component
Electronic Component
Electronic Component
Electronic Component
BOURNS
Electronic Component
SMBJ36CA-Q
Electronic Component
1
Package
SMB(DO-214AA)
Electronic Component
Electronic Component
Type
TVS
Electronic Component
ESD and Surge Protection (TVS / ESD)
Electronic Component
0.001g
Electronic Component
1
Electronic Component
BM0264381379
Operating Temperature
55℃~+150℃
Voltage
75.5V
Current(Ir)
1uA
Voltage(VBR)
44.2V

For datasheets, package documents, compatible-part guidance, or other technical resources, contact WMSIC customer service. Availability is confirmed case by case.

SMBJ36CA-Q 瞬态抑制二极管(TVS)产品概述

SMBJ36CA-Q是Bourns(伯恩斯) 推出的一款双向瞬态抑制二极管(TVS),专为36V系统的瞬态过压防护设计,采用SMB(DO-214AA)小型贴片封装,兼具高脉冲耐受能力、宽温适应性与低功耗特性,广泛应用于工业控制、汽车电子、通信设备等对可靠性要求严苛的场景。

一、产品核心定位与类别

SMBJ36CA-Q属于SMB封装系列TVS二极管,核心定位为36V直流/交流系统的瞬态过压防护器件:

  • 类型:双向TVS(无需区分正负极,简化电路设计);
  • 防护电压范围:适配36V以内的正常工作电压,对超过阈值的瞬态脉冲快速响应;
  • 设计目标:平衡“小封装”与“高防护能力”,满足空间受限场景的需求。

二、关键电气参数深度解析

SMBJ36CA-Q的核心参数针对实际应用场景做了精准优化,关键指标如下:

1. 正常工作与击穿特性

  • 反向截止电压(Vrwm):36V
    指器件在正常工作状态下反向偏置时可承受的最大连续电压,确保系统在36V以内的正常电压下,TVS不会导通,避免干扰电路功能。
  • 击穿电压(Vbr):44.2V
    反向导通的起始电压,当电压超过44.2V时,器件从“截止态”快速切换至“钳位态”,是防护功能的触发点。
  • 反向漏电流(Ir):1μA
    Vrwm下的反向漏电流仅1μA,功耗极低,不会影响系统正常工作功耗,避免额外发热。

2. 瞬态脉冲防护能力

  • 钳位电压(Vc):75.5V
    8/20μs标准脉冲波形下的峰值钳位电压,即瞬态过压被限制的最高电压,保护后端敏感元器件(如MCU、传感器)不被击穿。
  • 峰值脉冲电流(Ipp):52A@8/20μs
    8/20μs是国际通用的“雷击/浪涌脉冲波形”(上升时间8μs,半峰值时间20μs),52A为该波形下可承受的最大峰值电流,体现了器件对强脉冲的耐受能力。
  • 峰值脉冲功率(Ppp):600W
    单次8/20μs脉冲下的最大允许功率,是判断TVS防护能力的核心指标之一,600W可覆盖绝大多数工业/汽车场景的瞬态干扰。

3. 环境适应性

  • 工作温度范围:-55℃~+150℃
    覆盖工业级(-40℃~+85℃) 和汽车级(-40℃~+125℃) 温度要求,可在极端环境(如沙漠高温、极地低温)下稳定工作。

三、封装与物理特性

SMBJ36CA-Q采用SMB(DO-214AA)贴片封装,具有以下优势:

  • 尺寸小巧:典型尺寸为2.7mm×3.2mm×1.5mm,节省PCB空间,适合便携式设备、高密度电路板;
  • 焊接可靠性:表面贴装工艺兼容回流焊/波峰焊,焊接温度(峰值≤260℃)符合行业标准,批量生产一致性好;
  • 机械强度:塑封结构抗冲击、抗振动,适合车载、工业等振动环境。

四、典型应用场景

SMBJ36CA-Q的参数特性使其适配多领域的过压防护需求:

1. 汽车电子领域

  • 应用场景:车载36V辅助电源(如新能源汽车低压系统)、传感器接口(如胎压监测、摄像头)、车身控制模块(BCM);
  • 适配原因:宽温范围(-55℃~+150℃)符合汽车级AEC-Q101标准,双向极性适合差分信号防护。

2. 工业控制领域

  • 应用场景:PLC(可编程逻辑控制器)I/O模块、工业传感器(如温度/压力传感器)、电机驱动电路;
  • 适配原因:36V是工业控制常见电源电压,52A脉冲电流可应对雷击、浪涌干扰。

3. 通信设备领域

  • 应用场景:基站电源模块、以太网接口(如RS485、PoE)、光纤收发器;
  • 适配原因:双向TVS适合差分信号传输,避免信号失真,600W功率覆盖通信设备的瞬态干扰。

4. 消费电子与便携式设备

  • 应用场景:高功率便携式设备(如户外电源)、无人机电源管理模块;
  • 适配原因:小封装节省空间,低漏电流不影响设备续航。

五、品牌与可靠性优势

Bourns作为全球知名被动元件厂商,SMBJ36CA-Q具备以下可靠性优势:

  • 严格测试:经过高温老化、脉冲循环测试,确保批量一致性;
  • 行业认证:符合RoHS环保标准,部分批次通过AEC-Q101汽车级认证;
  • 长期稳定性:低漏电流、宽温范围保证器件在生命周期内(≥10年)性能无衰减。

六、选型与使用注意事项

1. 电压匹配原则

  • 系统正常工作电压需**≤Vrwm(36V)**,避免TVS在正常状态下导通;
  • 若系统电压波动较大(如±10%),需预留10%~20%的电压裕量。

2. 脉冲功率匹配

  • 若系统瞬态脉冲功率超过600W,需并联多个器件(如2个SMBJ36CA-Q并联,功率可提升至1200W);
  • 避免串联使用(TVS需并联在被防护电路两端)。

3. 焊接注意事项

  • 回流焊峰值温度≤260℃,回流时间≤10s;
  • 波峰焊温度≤245℃,焊接时间≤5s,避免塑封层损坏。

总结

SMBJ36CA-Q是一款高性价比的双向TVS二极管,针对36V系统提供可靠的瞬态过压防护,兼具“小封装、宽温、高脉冲能力”三大核心优势,广泛适配工业、汽车、通信等多领域需求。作为Bourns的成熟产品,其可靠性与一致性已得到市场验证,是电路防护设计的理想选择。

Request for quote

Send RFQ

Use the form for single models, category sourcing, and multi-line BOM requirements.

Send your target model and quantity.

Product sourcing intelligence

Model, package, availability, and BOM fit reviewed before quotation.

WMSIC turns product data, package visuals, BOM context, and sourcing signals into practical RFQ notes for buyers.

Electronic component model and package intelligence review on an ESD-safe inspection bench

Model & package intelligence

Model text, package form, tray or reel details, and visual evidence are reviewed together before RFQ feedback.

BOM matching and alternative component comparison workstation with protected IC samples

BOM matching & alternatives

BOM lines are compared by package, parameters, quantity, and workable alternatives for cleaner sourcing decisions.

Electronic component sourcing availability dashboard with ESD-protected samples

Sourcing availability signal

Stock routes, quotation confidence, lead-time notes, and shipment feasibility are checked before sales follow-up.

Buyer sourcing scenarios

Examples of how common component sourcing requests are organized.

Typical RFQ scenarios based on the WMSIC form fields, catalog data, manual review steps, and shipment preparation workflow.

The buyer shares the full part number, package requirement, quantity, destination, and available product photos so the quotation can record the exact version under review.

Package confirmation Typical RFQ workflow

A multi-line BOM is organized into direct sourcing lines, lines that need package clarification, and lines where alternative-part review is permitted.

Mixed BOM triage Typical RFQ workflow

The original manufacturer part number, datasheet revision, application, critical limits, and acceptable changes are collected before possible candidates are discussed.

Obsolete-part review Typical RFQ workflow

Sample quantity, minimum packing, package format, target date, and courier destination are kept together in one RFQ conversation.

Small-batch request Typical RFQ workflow

Package photos, model markings, board context, and the quantity needed for repair help focus the sourcing review on the relevant version.

Repair batch evidence Typical RFQ workflow

When a suffix or package note is incomplete, the response records the open difference and requests buyer confirmation before procurement proceeds.

Model suffix clarification Typical RFQ workflow

Packing format, carton notes, invoice details, courier option, destination, and tracking handoff are coordinated around the confirmed order.

Export handoff Typical RFQ workflow

The request connects the previously used model, current demand, package evidence, target timing, and replenishment sourcing route.

Replenishment inquiry Typical RFQ workflow

Related products

Packaged components ready for RFQ.