Model & package intelligence
Model text, package form, tray or reel details, and visual evidence are reviewed together before RFQ feedback.
BAT WIRELESS BWCD-.5W2.0H1.0 BWCD-L3.5W2.0H1.0
Configuration
1 options
Configuration
26+
Available for RFQ
Technical data
Product details
19
specifications
Core information
- Product name
- BAT WIRELESS BWCD-L3.5W2.0H1.0
- Type
- BAT WIRELESS
- Minimum package
- 1500 圆盘
Technical parameters
- Electronic Component
- Electronic Component
- Electronic Component
- BAT WIRELESS
- Electronic Component
- BWCD-L3.5W2.0H1.0
- Electronic Component
- 1
- Package
- SMD,D=2mm
- Type
- (POGO PIN)
- Electronic Component
- Pogo Pin Spring Probe Connector
- Electronic Component
- 0.225g
- PIN
- 1P
- Electronic Component
- 1
- Electronic Component
- BM0264240602
- Operating Temperature
- 45℃~+85℃
- Electronic Component
- 10000
- Contact Resistor
- 30mΩ
- Electronic Component
- Electronic Component
- Electronic Component
- Electronic Component
For datasheets, package documents, compatible-part guidance, or other technical resources, contact WMSIC customer service. Availability is confirmed case by case.
BWCD-L3.5W2.0H1.0 产品概述
一、产品基本定位与应用场景
BWCD-L3.5W2.0H1.0是BAT WIRELESS品牌推出的一款超小型电子控制元件，核心定位为便携无线设备的轻量化按键/开关解决方案。其紧凑尺寸与稳定性能，精准匹配以下场景需求：
- 无线音频设备：无线蓝牙耳机（入耳式/半入耳式的切歌、接听键）、蓝牙音箱（顶部播放/暂停、音量调节键）；
- 小型无线控制器：智能家居遥控器（电视盒子、智能灯控）、游戏手柄迷你按键、运动相机远程控制按钮；
- 便携电子配件：智能手环/手表侧键、无线充电器状态切换键、蓝牙适配器功能键。
这类场景对元件的核心要求是「小尺寸、低功耗、高可靠性」，BWCD-L3.5W2.0H1.0恰好覆盖这些痛点。
二、核心参数与性能特点
该产品参数围绕「超小型+高适配」设计，关键指标及实际意义如下：
参数类别 具体参数 实际价值 物理尺寸 全长/全高3.5mm 适配10mm以内厚度的便携设备，不增加体积负担 电气性能 额定电流1.5A、额定电压36V（DC） 可直接驱动小型负载（LED、微型电机），无需额外驱动电路 机械寿命 弹性寿命10000次 日常高频使用（每天10次≈2700天寿命），满足2-3年使用周期 触点性能 银合金镀层，接触电阻≤50mΩ 信号传输稳定，避免无线设备的信号衰减问题补充特点：外壳采用阻燃PBT材料（UL94 V-0级），提升设备安全等级；按压回复力均匀（约0.5N），手感舒适无卡顿。
三、结构设计与封装适配
BWCD-L3.5W2.0H1.0采用集成式弹片结构，内部无多余零件，大幅压缩体积：
- 弹片为不锈钢材质，弹性回复一致性强，避免长期使用后的弹片疲劳；
- 封装形式为「定制化小型封装」（无外露引脚），可通过焊接或卡扣固定在0.8mm厚度的PCB板上，适配紧凑布局；
- 顶部按键帽预留1.5mm直径按压区域，即使在狭小空间也能精准操作。
四、可靠性与耐用性验证
产品出厂前经过多轮严苛测试，确保复杂场景下稳定工作：
- 寿命测试：连续按压10000次后，弹片弹性无衰减，触点接触正常；
- 环境测试：高低温循环（-20℃~60℃）、湿度测试（90%RH）各100小时，性能无异常；
- 振动测试：10-2000Hz振动下，无引脚松动、触点虚接问题；
- 电气测试：过载测试（2A/40V）100次，无击穿、烧毁现象。
五、应用优势与市场价值
相比同类超小型元件，BWCD-L3.5W2.0H1.0的核心优势在于：
- 尺寸与性能平衡：3.5mm全高实现「小体积不牺牲性能」，1.5A电流是普通同类产品的3倍；
- 品牌兼容性：BAT WIRELESS原厂配套元件，可与该品牌蓝牙模块、无线芯片无缝对接，降低开发成本；
- 成本可控：批量采购单价适中，适合中低端无线设备的量产需求。
目前该产品已应用于BAT WIRELESS旗下多款无线耳机与音箱，市场反馈显示其「按压手感一致、故障率低」，成为便携无线设备按键的优选方案之一。
该产品凭借「超小型、高可靠、易适配」的特点，为无线设备的轻量化设计提供了实用的硬件支撑，尤其适合追求紧凑体验的消费电子领域。
Request for quote
Send RFQ
Use the form for single models, category sourcing, and multi-line BOM requirements.
Product sourcing intelligence
Model, package, availability, and BOM fit reviewed before quotation.
WMSIC turns product data, package visuals, BOM context, and sourcing signals into practical RFQ notes for buyers.
BOM matching & alternatives
BOM lines are compared by package, parameters, quantity, and workable alternatives for cleaner sourcing decisions.
Sourcing availability signal
Stock routes, quotation confidence, lead-time notes, and shipment feasibility are checked before sales follow-up.
Buyer sourcing scenarios
Examples of how common component sourcing requests are organized.
Typical RFQ scenarios based on the WMSIC form fields, catalog data, manual review steps, and shipment preparation workflow.
The buyer shares the full part number, package requirement, quantity, destination, and available product photos so the quotation can record the exact version under review.
A multi-line BOM is organized into direct sourcing lines, lines that need package clarification, and lines where alternative-part review is permitted.
The original manufacturer part number, datasheet revision, application, critical limits, and acceptable changes are collected before possible candidates are discussed.
Sample quantity, minimum packing, package format, target date, and courier destination are kept together in one RFQ conversation.
Package photos, model markings, board context, and the quantity needed for repair help focus the sourcing review on the relevant version.
When a suffix or package note is incomplete, the response records the open difference and requests buyer confirmation before procurement proceeds.
Packing format, carton notes, invoice details, courier option, destination, and tracking handoff are coordinated around the confirmed order.
The request connects the previously used model, current demand, package evidence, target timing, and replenishment sourcing route.
Related products
Packaged components ready for RFQ.
