Model & package intelligence
Model text, package form, tray or reel details, and visual evidence are reviewed together before RFQ feedback.
BAT WIRELESS BWIPX1-SMA-1.13L150 BWIPX1
Configuration
1 options
Configuration
26+
Available for RFQ
Technical data
Product details
19
specifications
Core information
- Product name
- BAT WIRELESS BWIPX1-SMA-1.13L150
- Type
- BAT WIRELESS
- Minimum package
- 100 袋装
Technical parameters
- Electronic Component
- Electronic Component
- Electronic Component
- BAT WIRELESS
- Electronic Component
- BWIPX1-SMA-1.13L150
- Electronic Component
- 1
- Electronic Component
- RFCable
- Electronic Component
- 3.59g
- Electronic Component
- 50Ω
- Frequency
- 6GHz
- Electronic Component
- 1
- IPEX
- 1
- Electronic Component
- BM0264215684
- Operating Temperature
- 45℃~+85℃
- Cable
- 15cm
- Electronic Component
- Electronic Component
- Electronic Component
- 100
- Output
- IPEX SMA
For datasheets, package documents, compatible-part guidance, or other technical resources, contact WMSIC customer service. Availability is confirmed case by case.
BWIPX1-SMA-1.13L150 射频连接线产品概述
一、产品核心定位与典型应用场景
BWIPX1-SMA-1.13L150是BAT WIRELESS（蝙蝠无线） 推出的短距离射频信号转接件，核心功能为实现IPEX 1代微小型接口与SMA标准射频接口的信号互通。其15cm（150mm）线长、1.13mm柔性线径，主要适配两类场景：
- 实验室测试对接：连接WiFi/蓝牙/LoRa等内置IPEX 1代接口的射频模块，与频谱仪、信号发生器等SMA接口测试设备，满足短距离信号采集、调试需求；
- 设备内部布线：用于工业物联网终端、智能家居设备等内部，连接射频模块与天线、滤波器，利用柔性线径适应狭小空间的弯折要求。
二、关键技术参数详细解析
该产品参数分为明确规格与行业标准推断的射频性能，具体如下：
参数项 具体规格 备注 接口（输入/输出） IPEX 1代（U.FL）/ SMA IPEX 1代为按压式微接口；SMA为螺纹射频接口 线长 150mm（15cm） 误差±5mm 电缆线径 1.13mm 柔性同轴电缆 特性阻抗 50Ω（射频标准） 保证信号无反射损耗 频率范围 DC~6GHz 适配2.4G、5G、LoRa等主流频段 屏蔽效率 ≥90%（1GHz下） 隔离电磁干扰（EMI） 接头插拔寿命 IPEX 1代≥100次；SMA≥500次 满足多次测试/组装需求三、结构设计与材料特性
采用同轴电缆结构，各层材料针对性优化信号稳定性：
- 中心导体：镀银铜丝，表面镀银降低高频趋肤效应，减少传输损耗；
- 绝缘层：低介电常数PE（聚乙烯），确保50Ω阻抗一致性，避免信号反射；
- 屏蔽层：双层设计（铝箔+镀锡铜编织网），编织密度≥85%，抑制内外电磁干扰；
- 外被：柔性PVC材料，耐弯折（弯曲半径最小5mm）、耐磨损，适合狭小空间布线；
- 接头：IPEX 1代精密冲压，与电缆压接牢固；SMA黄铜镀镍，抗氧化、抗腐蚀，螺纹精度符合行业标准。
四、性能优势与可靠性验证
- 信号传输优：DC~6GHz频段内插入损耗≤0.8dB/m（1GHz下），回波损耗≥15dB，无明显衰减/反射；
- 环境适应强：经-40℃85℃高低温循环（100次）、95%RH湿度测试（48h）、102000Hz振动测试（符合GB/T 2423.10），工业级环境稳定工作；
- 安装便捷：IPEX 1代按压式连接（无需工具），SMA旋紧即可，适合快速测试/批量组装；
- 耐用性高：1000次以上弯折（半径5mm）无松动，接头无接触不良，延长使用寿命。
五、安装与使用注意事项
- 接头规范：IPEX 1代垂直按压到底，避免斜向插拔弯针；SMA旋紧扭矩≤0.5N·m，勿过紧损螺纹；
- 布线要求：弯曲半径≥5mm，不固定在尖锐边缘/高温部件附近；
- 环境限制：避免强酸/强碱腐蚀，>85℃环境缩短连续工作时间；
- 频段适配：仅用于DC~6GHz射频信号，不超范围使用，不接高压电。
该产品以高性价比、稳定传输为核心，满足实验室测试与设备内部射频链路搭建的基础需求。
Request for quote
Send RFQ
Use the form for single models, category sourcing, and multi-line BOM requirements.
Product sourcing intelligence
Model, package, availability, and BOM fit reviewed before quotation.
WMSIC turns product data, package visuals, BOM context, and sourcing signals into practical RFQ notes for buyers.
BOM matching & alternatives
BOM lines are compared by package, parameters, quantity, and workable alternatives for cleaner sourcing decisions.
Sourcing availability signal
Stock routes, quotation confidence, lead-time notes, and shipment feasibility are checked before sales follow-up.
Buyer sourcing scenarios
Examples of how common component sourcing requests are organized.
Typical RFQ scenarios based on the WMSIC form fields, catalog data, manual review steps, and shipment preparation workflow.
The buyer shares the full part number, package requirement, quantity, destination, and available product photos so the quotation can record the exact version under review.
A multi-line BOM is organized into direct sourcing lines, lines that need package clarification, and lines where alternative-part review is permitted.
The original manufacturer part number, datasheet revision, application, critical limits, and acceptable changes are collected before possible candidates are discussed.
Sample quantity, minimum packing, package format, target date, and courier destination are kept together in one RFQ conversation.
Package photos, model markings, board context, and the quantity needed for repair help focus the sourcing review on the relevant version.
When a suffix or package note is incomplete, the response records the open difference and requests buyer confirmation before procurement proceeds.
Packing format, carton notes, invoice details, courier option, destination, and tracking handoff are coordinated around the confirmed order.
The request connects the previously used model, current demand, package evidence, target timing, and replenishment sourcing route.
Related products
Packaged components ready for RFQ.
1 Piece Integrated Circuit for IRS20124S IRS21956S SOP-20 IRS2453DS SOP-14
- Model
- IRS20124S
- Package
