Model & package intelligence
Model text, package form, tray or reel details, and visual evidence are reviewed together before RFQ feedback.
CJT C3030F-TP-A C3030F
Configuration
1 options
Configuration
26+
Available for RFQ
Technical data
Product details
18
specifications
Core information
- Product name
- CJT C3030F-TP-A
- Type
- CJT
- Minimum package
- 10000 个
Technical parameters
- Electronic Component
- Electronic Component
- Electronic Component
- CJT
- Electronic Component
- C3030F-TP-A
- Electronic Component
- 1
- Electronic Component
- Terminal Block
- Electronic Component
- 0.07g
- Electronic Component
- 1
- Electronic Component
- BM0265448497
- AWG
- 20~24
- Electronic Component
- Electronic Component
- Electronic Component
- Electronic Component
- Voltage
- 600V
- Electronic Component
- Electronic Component
- Electronic Component
- 10000
- (OD)
- 1.85mm
For datasheets, package documents, compatible-part guidance, or other technical resources, contact WMSIC customer service. Availability is confirmed case by case.
C3030F-TP-A胶壳端子产品概述
一、产品定位与核心场景
C3030F-TP-A是长江连接器（CJT）推出的线端胶壳端子，针对20~24AWG小型导线设计，聚焦中低压（≤600V）电气连接领域，主打“小型化、高可靠、易装配”特性。产品适配工业控制、消费电子等对布线密度要求较高的场景，可实现导线与胶壳的稳定压接连接，是模块化接线系统的核心组件之一。
二、核心技术参数深度解析
- 线径与绝缘适配：支持AWG2024导线（对应裸线径0.5110.812mm），绝缘外径（OD）精准适配1.85mm——覆盖市场上多数小型PVC、XLPE绝缘导线，压接时可避免“绝缘过厚卡滞”或“过薄接触不良”问题；
- 电气性能：额定电压600V，满足工业低压控制、小型家电等场景的耐压需求，绝缘设计可有效隔离不同回路；
- 接触性能：触头采用磷青铜（弹性+导电性平衡），表面镀锡——低接触电阻（典型值≤10mΩ），插拔过程中弹性恢复性好，长期使用无明显氧化。
三、材料与工艺的可靠性设计
1. 触头材料：磷青铜的核心优势
磷青铜（CuSn合金）兼具高弹性模量（约110GPa）与低接触电阻，完美适配端子“反复插拔+稳定接触”的需求：插拔寿命可达500次以上（行业常规测试标准），不会因弹性疲劳导致接触失效；
2. 镀层工艺：锡镀层的平衡选择
表面镀锡（Sn）而非金/银，核心考量是成本与性能的平衡：锡镀层焊接性优异（兼容手工焊、波峰焊），且在普通环境（-40~85℃、湿度≤95%）下抗氧化性优于裸铜，可有效降低长期接触电阻；
3. 结构工艺：压接区的防脱落设计
端子压接区采用“双齿咬合”结构，压接后可与导线紧密咬合，抗拉强度≥10N（符合UL认证标准），避免导线在振动场景下脱落。
四、适配与兼容性
- 胶壳适配：匹配长江连接器同系列C3030系列胶壳（如C3030F-xxP型号），实现“端子+胶壳”模块化连接，支持单排/多排接线，适配不同回路数量需求；
- 工具适配：兼容常规20~24AWG端子压接钳（如JST同款或长江专用工具），无需特殊定制，降低装配成本；
- 环境兼容性：工作温度范围-40℃~+105℃，可满足多数工业、汽车（辅助系统）场景的温度需求。
五、典型应用领域
- 工业自动化：PLC模块、接近开关、小型电磁阀的内部接线；
- 消费电子：智能家居（温控器、智能插座）、小型家电（榨汁机、加湿器）的低压布线；
- 新能源辅助系统：家庭储能电池的低压控制线路、充电桩辅助接线；
- 汽车电子（低压）：车载中控、仪表盘的内部连接（非高压动力回路）；
- 通讯设备：小型基站、路由器的电源与信号接线。
六、总结
C3030F-TP-A通过“磷青铜触头+锡镀层+精准线径适配”的设计，在小型化、成本可控、可靠性三者间实现平衡，是中低压电气连接场景中替代进口端子的高性价比选择，尤其适合对布线密度、装配效率有要求的批量应用场景。
Request for quote
Send RFQ
Use the form for single models, category sourcing, and multi-line BOM requirements.
Product sourcing intelligence
Model, package, availability, and BOM fit reviewed before quotation.
WMSIC turns product data, package visuals, BOM context, and sourcing signals into practical RFQ notes for buyers.
BOM matching & alternatives
BOM lines are compared by package, parameters, quantity, and workable alternatives for cleaner sourcing decisions.
Sourcing availability signal
Stock routes, quotation confidence, lead-time notes, and shipment feasibility are checked before sales follow-up.
Buyer sourcing scenarios
Examples of how common component sourcing requests are organized.
Typical RFQ scenarios based on the WMSIC form fields, catalog data, manual review steps, and shipment preparation workflow.
The buyer shares the full part number, package requirement, quantity, destination, and available product photos so the quotation can record the exact version under review.
A multi-line BOM is organized into direct sourcing lines, lines that need package clarification, and lines where alternative-part review is permitted.
The original manufacturer part number, datasheet revision, application, critical limits, and acceptable changes are collected before possible candidates are discussed.
Sample quantity, minimum packing, package format, target date, and courier destination are kept together in one RFQ conversation.
Package photos, model markings, board context, and the quantity needed for repair help focus the sourcing review on the relevant version.
When a suffix or package note is incomplete, the response records the open difference and requests buyer confirmation before procurement proceeds.
Packing format, carton notes, invoice details, courier option, destination, and tracking handoff are coordinated around the confirmed order.
The request connects the previously used model, current demand, package evidence, target timing, and replenishment sourcing route.
Related products
Packaged components ready for RFQ.
