Model & package intelligence
Model text, package form, tray or reel details, and visual evidence are reviewed together before RFQ feedback.
CJT C3030WR-2P C3030WR
Configuration
1 options
Configuration
26+
Available for RFQ
Technical data
Product details
19
specifications
Core information
- Product name
- CJT C3030WR-2P
- Type
- CJT
- Minimum package
- 1000 托盘
Technical parameters
- Electronic Component
- Electronic Component
- Electronic Component
- CJT
- Electronic Component
- C3030WR-2P
- Electronic Component
- 1
- Package
- P=3mm
- Electronic Component
- 1
- Electronic Component
- Wire-to-Board
- Electronic Component
- 0.39g
- Electronic Component
- 3mm
- PIN
- 2P
- Electronic Component
- 1
- Electronic Component
- BM0265448540
- Electronic Component
- PA66
- Electronic Component
- Electronic Component
- Operating Temperature
- 40℃~+105℃
- Pin
- 1x2P
For datasheets, package documents, compatible-part guidance, or other technical resources, contact WMSIC customer service. Availability is confirmed case by case.
C3030WR-2P 产品概述
一、产品简介
C3030WR-2P 为 CJT（长江连接器）推出的一款线对板弯插针座，规格为 1x2P（每排 2 PIN），间距 P = 3.00 mm。产品采用弯插（右角/倾斜）式引脚，适合将成束导线或接插件通过焊接固定于 PCB，实现可靠的电气连接与机械支撑。
二、主要技术参数
- 引脚结构：1x2P（单排 2 PIN，弯插）
- 引脚间距：3.00 mm
- 额定电流：8.5 A（整组）
- 额定电压：600 V
- 工作温度：-40 ℃ ~ +105 ℃
- 触头材质：黄铜（Brass）
- 触头镀层：镀锡（Sn）
- 塑料材质：PA66，阻燃等级 UL94V-0
三、结构与材料特点
触头采用优质黄铜，表面镀锡以提高可焊性和抗氧化能力；PA66 阻燃塑壳在高温或短路情况下能提供良好机械与绝缘保护。弯插式引脚便于装配与波峰焊/手工焊接，同时对 PCB 布局提供灵活性。
四、典型应用场景
适用于工业控制、家用电器、小型电源模块、通信设备、LED 驱动及其他需要低体积、高可靠性线对板连接的场合。尤其适合需承载中等电流（如 8.5A 以下）并要求 600V 绝缘等级的应用。
五、安装与焊接建议
- PCB 布局按 3.00 mm 间距开孔与焊盘设计，保证引脚过孔与焊盘面积符合波峰焊要求；
- 支持手工焊、回流或波峰焊（请根据具体工艺验证抗热性），焊接温度与时间应控制在材料允许范围内以避免塑件变形；
- 推荐使用合适线规与端子，依据电流需求选择导线截面（可参考 0.5–1.5 mm² 范围），并确保可靠压接或焊接；
- 装配时注意插入深度与方向，避免重复弯折引脚造成机械疲劳。
六、包装与储存
建议干燥环境储存，避免长期阳光直射与酸碱气体腐蚀。出货通常以托盘或卷装形式包装，根据订购量可提供防潮包装。
七、选型注意事项
选型时请确认电流、工作温度与电压需求；若应用为连续高温或振动强烈环境，建议与厂商确认长期可靠性与老化测试数据。若需其它 PIN 数或不同间距型号，可咨询 CJT 提供系列型号替代方案。
如需产品 3D/2D 尺寸图、焊盘推荐或样品试用，可联系 CJT（长江连接器）或指定代理商获取更详尽资料。
Request for quote
Send RFQ
Use the form for single models, category sourcing, and multi-line BOM requirements.
Product sourcing intelligence
Model, package, availability, and BOM fit reviewed before quotation.
WMSIC turns product data, package visuals, BOM context, and sourcing signals into practical RFQ notes for buyers.
BOM matching & alternatives
BOM lines are compared by package, parameters, quantity, and workable alternatives for cleaner sourcing decisions.
Sourcing availability signal
Stock routes, quotation confidence, lead-time notes, and shipment feasibility are checked before sales follow-up.
Buyer sourcing scenarios
Examples of how common component sourcing requests are organized.
Typical RFQ scenarios based on the WMSIC form fields, catalog data, manual review steps, and shipment preparation workflow.
The buyer shares the full part number, package requirement, quantity, destination, and available product photos so the quotation can record the exact version under review.
A multi-line BOM is organized into direct sourcing lines, lines that need package clarification, and lines where alternative-part review is permitted.
The original manufacturer part number, datasheet revision, application, critical limits, and acceptable changes are collected before possible candidates are discussed.
Sample quantity, minimum packing, package format, target date, and courier destination are kept together in one RFQ conversation.
Package photos, model markings, board context, and the quantity needed for repair help focus the sourcing review on the relevant version.
When a suffix or package note is incomplete, the response records the open difference and requests buyer confirmation before procurement proceeds.
Packing format, carton notes, invoice details, courier option, destination, and tracking handoff are coordinated around the confirmed order.
The request connects the previously used model, current demand, package evidence, target timing, and replenishment sourcing route.
Related products
Packaged components ready for RFQ.
