Model & package intelligence
Model text, package form, tray or reel details, and visual evidence are reviewed together before RFQ feedback.
CJT A2508H-2P A2508H
Configuration
1 options
Configuration
26+
Available for RFQ
Technical data
Product details
19
specifications
Core information
- Product name
- CJT A2508H-2P
- Type
- CJT
- Minimum package
- 1000 袋
Technical parameters
- Electronic Component
- Electronic Component
- Electronic Component
- CJT
- Electronic Component
- A2508H-2P
- Electronic Component
- 1
- Package
- P=2.5mm
- Electronic Component
- 1
- Electronic Component
- (Wire-to-Board / Wire-to-Wire)
- Electronic Component
- 0.19g
- Electronic Component
- 2.5mm
- Electronic Component
- Electronic Component
- Electronic Component
- 1
- Electronic Component
- BM0263518386
- Electronic Component
- PA66
- Operating Temperature
- 40℃~+105℃
- Socket
- 1x2P
- Electronic Component
- Electronic Component
For datasheets, package documents, compatible-part guidance, or other technical resources, contact WMSIC customer service. Availability is confirmed case by case.
CJT A2508H-2P胶壳产品概述
长江连接器（CJT）推出的A2508H-2P胶壳，是针对小间距线对板/线对线连接需求开发的基础组件，以紧凑布局、可靠锁定、宽温适应为核心优势，广泛应用于多领域小型化设备的信号与低功率传输场景。
一、产品核心定位与应用场景
A2508H-2P属于单排2Pin（1×2P）、间距2.5mm的胶壳组件，主要面向空间紧凑、需稳定连接的应用场景：
- 消费电子：智能家居设备（智能传感器、小型家电控制器）、便携式电子（蓝牙音箱、智能手表充电模块）；
- 汽车电子：车载辅助系统（倒车雷达线束、氛围灯控制器）、车身小模块（车窗控制辅助单元）；
- 工业控制：小型PLC模块、传感器节点（温度/湿度传感器）、低功率执行器（小型继电器接口）；
- 通信设备：小型路由器、无线AP的内部信号连接。
二、关键技术参数详解
该产品的核心参数明确适配小型化连接需求，具体如下：
参数类别 具体参数 备注说明 插孔结构 1×2P（单排2Pin） 布局紧凑，适配窄空间 间距（Pitch） 2.5mm 小间距设计，减少整体体积 锁扣特性 带锁扣 插合后锁定，防脱开 翅片特性 不带翅 简化装配，无需额外固定 塑料材质 PA66（聚酰胺66） 强度高、耐磨损 阻燃等级 UL94V-0 燃烧自熄，符合安全规范 工作温度范围 -40℃~+105℃ 宽温适应，覆盖多场景 颜色 白色 便于装配识别，避免误插三、结构设计与材料特性
3.1 结构设计优势
- 带锁扣锁定：插合时锁扣与配对连接器（线端公壳/板端母壳）精准卡合，提供明确的“锁定反馈”，避免虚插；同时可承受汽车行驶、工业设备运行等振动场景，防止脱开；
- 精准定位：单排2Pin布局的插孔间距均匀，配对时不易插反，提升装配效率；
- 无翅简化：不带翅设计减少额外固定步骤，适合导线直接连接的场景，降低装配复杂度。
3.2 材料性能亮点
- PA66材质：聚酰胺66具有优异的机械强度（抗冲击、耐磨损），长期使用不易变形；耐化学性良好，可抵抗酒精、弱酸碱等常见溶剂；
- UL94V-0阻燃：符合UL阻燃标准，燃烧时仅自熄（无滴落物），有效降低火灾蔓延风险，满足电子设备安全规范。
四、环境适应性与可靠性
4.1 宽温环境适应
工作温度覆盖-40℃~+105℃，可适应：
- 低温场景：北方冬季户外传感器、冷链物流设备；
- 高温场景：汽车发动机舱附近（≤100℃）、工业烤箱附近的小型控制模块。
4.2 长期可靠性
- 锁扣结构经振动测试（符合IEC 60068-2-6），可承受10~2000Hz振动，无脱开或接触不良；
- PA66材质耐老化性优异，长期使用（5年以上）性能无明显衰减，适配设备全生命周期需求。
五、安装与使用注意事项
- 配对要求：需与CJT同系列配对连接器（如线端公壳、板端母壳）配合，避免尺寸不匹配导致插合不良；
- 装配要点：插合时施加均匀压力，听到锁扣锁定声后确认完全插合；禁止强行插拔，防止锁扣损坏；
- 存储要求：存储于干燥通风环境（0℃40℃，湿度30%70%），避免阳光直射或高湿度导致材质老化；
- 维护注意：清洁用中性清洁剂（如酒精），避免丙酮等腐蚀性溶剂；导线与胶壳连接处避免过度弯折，防止应力集中断裂。
该产品凭借紧凑布局、可靠锁定、宽温适应等优势，成为CJT针对小型化连接需求的经典产品，广泛获得消费电子、汽车、工业领域客户的认可。
Request for quote
Send RFQ
Use the form for single models, category sourcing, and multi-line BOM requirements.
Product sourcing intelligence
Model, package, availability, and BOM fit reviewed before quotation.
WMSIC turns product data, package visuals, BOM context, and sourcing signals into practical RFQ notes for buyers.
BOM matching & alternatives
BOM lines are compared by package, parameters, quantity, and workable alternatives for cleaner sourcing decisions.
Sourcing availability signal
Stock routes, quotation confidence, lead-time notes, and shipment feasibility are checked before sales follow-up.
Buyer sourcing scenarios
Examples of how common component sourcing requests are organized.
Typical RFQ scenarios based on the WMSIC form fields, catalog data, manual review steps, and shipment preparation workflow.
The buyer shares the full part number, package requirement, quantity, destination, and available product photos so the quotation can record the exact version under review.
A multi-line BOM is organized into direct sourcing lines, lines that need package clarification, and lines where alternative-part review is permitted.
The original manufacturer part number, datasheet revision, application, critical limits, and acceptable changes are collected before possible candidates are discussed.
Sample quantity, minimum packing, package format, target date, and courier destination are kept together in one RFQ conversation.
Package photos, model markings, board context, and the quantity needed for repair help focus the sourcing review on the relevant version.
When a suffix or package note is incomplete, the response records the open difference and requests buyer confirmation before procurement proceeds.
Packing format, carton notes, invoice details, courier option, destination, and tracking handoff are coordinated around the confirmed order.
The request connects the previously used model, current demand, package evidence, target timing, and replenishment sourcing route.
Related products
Packaged components ready for RFQ.
