Model & package intelligence
Model text, package form, tray or reel details, and visual evidence are reviewed together before RFQ feedback.
Chilisin BBPY00160808601Y00
Configuration
1 options
Configuration
26+
Available for RFQ
Technical data
Product details
20
specifications
Core information
- Product name
- chilisin BBPY00160808601Y00
- Type
- CHILISIN
- Unit
- Electronic Component
- Minimum package
- 4000 圆盘
Technical parameters
- Electronic Component
- Electronic Component
- Electronic Component
- Electronic Component
- Electronic Component
- CHILISIN
- Electronic Component
- BBPY00160808601Y00
- Electronic Component
- 1
- Package
- 0603
- Electronic Component
- Ferrite Bead
- Electronic Component
- ±25%
- Electronic Component
- 0.057g
- Electronic Component
- 1
- Channel Count
- 1
- Electronic Component
- BM0265446216
- Current
- 1A
- @Frequency
- 600Ω@100MHz
- Resistor(DCR)
- 200mΩ
- Electronic Component
- Electronic Component
For datasheets, package documents, compatible-part guidance, or other technical resources, contact WMSIC customer service. Availability is confirmed case by case.
BBPY00160808601Y00磁珠产品概述
一、产品基本信息
BBPY00160808601Y00是奇力新（Chilisin） 推出的一款贴片磁珠，采用0603封装（对应公制1608规格，长0.6mm×宽0.8mm），为单通道设计，核心定位是针对100MHz频段的高频干扰抑制（EMI滤波），广泛适配消费电子、通信设备等小型化电路的EMC整改需求。
二、核心电气参数解析
磁珠的性能核心由高频阻抗、直流电阻（DCR）、额定电流等参数决定，该型号关键参数及实际意义如下：
- 高频阻抗：600Ω@100MHz
这是衡量磁珠干扰抑制能力的核心指标——在100MHz交流信号下，磁珠呈现600Ω阻抗，可有效衰减该频段噪声（如开关电源纹波、射频串扰等）。参数误差±25%，符合常规贴片磁珠的生产公差范围，保证批量应用的一致性。 - 直流电阻（DCR）：200mΩ
低直流电阻意味着磁珠在直流信号/电源传输中损耗极小，不会因电阻发热影响电路效率，同时确保直流信号（如电池供电、信号基准）的正常传输（例如电源滤波时，不干扰电源模块的直流输出）。 - 额定电流：1A
长期工作允许的最大直流电流为1A，覆盖中等功率电路需求（如手机主板小功率电源、路由器信号模块供电）。超过额定电流可能导致磁珠磁饱和，降低干扰抑制效果甚至损坏元件，需注意电路负载匹配。
三、典型应用场景
该磁珠因封装小巧、阻抗特性明确，主要应用于以下场景：
- 消费电子：智能手机、平板电脑、智能穿戴设备的主板电源滤波（抑制开关电源100MHz左右噪声），以及音频、射频信号线路的串扰抑制（如耳机接口、WiFi模块接口）。
- 通信设备：路由器、交换机、基站的信号接口（RJ45、射频接口）滤波，以及电源模块的EMI整改（满足电磁兼容标准）。
- 工业控制：PLC、传感器接口的信号滤波（防止工业环境高频干扰影响传感器精度），以及小型工业电源的噪声抑制。
四、封装与贴装特性
采用0603贴片封装（公制1608），尺寸为0.6mm（长）×0.8mm（宽），厚度约0.3mm，具备以下贴装优势：
- 兼容高密度SMT工艺，可与其他0603封装元件（如电阻、电容）同板贴装；
- 尺寸小巧，适配耳机、智能手环等超小型设备的设计需求；
- 奇力新成熟的封装工艺保证回流焊稳定性，降低虚焊、脱落风险。
五、产品优势总结
- 针对性干扰抑制：针对100MHz频段优化，阻抗特性明确，EMI抑制效果稳定；
- 低损耗设计：200mΩ低DCR，直流损耗小，不影响电路效率；
- 宽电流覆盖：1A额定电流满足中等功率电路需求；
- 小型化适配：0603封装适合高密度、小型化设备；
- 品牌可靠性：奇力新专业磁珠厂商，产品一致性好，长期可靠性高。
该型号是奇力新经典的EMI滤波磁珠之一，凭借明确的阻抗特性、小封装和可靠性能，成为众多电子设备EMC整改的常用选择。
Request for quote
Send RFQ
Use the form for single models, category sourcing, and multi-line BOM requirements.
Product sourcing intelligence
Model, package, availability, and BOM fit reviewed before quotation.
WMSIC turns product data, package visuals, BOM context, and sourcing signals into practical RFQ notes for buyers.
BOM matching & alternatives
BOM lines are compared by package, parameters, quantity, and workable alternatives for cleaner sourcing decisions.
Sourcing availability signal
Stock routes, quotation confidence, lead-time notes, and shipment feasibility are checked before sales follow-up.
Buyer sourcing scenarios
Examples of how common component sourcing requests are organized.
Typical RFQ scenarios based on the WMSIC form fields, catalog data, manual review steps, and shipment preparation workflow.
The buyer shares the full part number, package requirement, quantity, destination, and available product photos so the quotation can record the exact version under review.
A multi-line BOM is organized into direct sourcing lines, lines that need package clarification, and lines where alternative-part review is permitted.
The original manufacturer part number, datasheet revision, application, critical limits, and acceptable changes are collected before possible candidates are discussed.
Sample quantity, minimum packing, package format, target date, and courier destination are kept together in one RFQ conversation.
Package photos, model markings, board context, and the quantity needed for repair help focus the sourcing review on the relevant version.
When a suffix or package note is incomplete, the response records the open difference and requests buyer confirmation before procurement proceeds.
Packing format, carton notes, invoice details, courier option, destination, and tracking handoff are coordinated around the confirmed order.
The request connects the previously used model, current demand, package evidence, target timing, and replenishment sourcing route.
Related products
Packaged components ready for RFQ.
