Model & package intelligence
Model text, package form, tray or reel details, and visual evidence are reviewed together before RFQ feedback.
TA-I Technology RM06FTN3001
Configuration
1 options
Configuration
26+
Available for RFQ
Technical data
Product details
19
specifications
Core information
- Product name
- RM06FTN3001
- Type
- TA-I Technology
- Minimum package
- 5000 圆盘
Technical parameters
- Power
- 100mW
- Electronic Component
- Electronic Component
- Electronic Component
- Electronic Component
- Electronic Component
- RM06FTN3001
- Electronic Component
- 1
- Package
- 0603
- Electronic Component
- SMD Resistor
- Electronic Component
- ±1%
- Electronic Component
- 0.025g
- Electronic Component
- 3kΩ
- Electronic Component
- 10
- Electronic Component
- BM0264546739
- Operating Temperature
- 55℃~+155℃
- Operating Voltage
- 75V
- Electronic Component
- ±100ppm/℃
- Resistor Type
- Resistor
For datasheets, package documents, compatible-part guidance, or other technical resources, contact WMSIC customer service. Availability is confirmed case by case.
RM06FTN3001 片式厚膜电阻产品概述
一、产品基本信息
RM06FTN3001是大毅科技推出的一款0603封装厚膜片式电阻，属于常规精密级电阻产品。其型号命名逻辑清晰：
- “RM”为大毅厚膜电阻系列标识；
- “06”对应英制0603封装（公制尺寸1.6mm×0.8mm），适配高密度PCB布局；
- “FTN”代表厚膜印刷工艺类型；
- “3001”为阻值编码（300×10¹=3kΩ），是行业通用的电阻值表示方式。
该产品采用厚膜工艺制造，兼具小体积与稳定性能，是电子电路中分压、限流、滤波等基础功能的常用元件。
二、核心电气性能参数
1. 阻值与精度
额定阻值为3kΩ，精度为**±1%**，属于工业级常规精密电阻范畴——既满足多数电路对阻值偏差的要求，又避免了过高精度带来的成本冗余。
2. 功率与电压限制
- 最大额定功率：100mW（1/10W），适合小功率电路应用；
- 最大工作电压：75V。需注意：使用时需同时满足两个限制条件（例如，当电压为75V时，通过电阻的电流不应超过100mW/75V≈1.33mA），避免过载损坏。
3. 温度系数
典型值为**±100ppm/℃**，表示温度每变化1℃，阻值相对变化量为±0.01%。该参数确保了产品在温度波动环境下的性能稳定性，可有效避免电路因温度偏移导致的功能异常。
三、环境适应性与可靠性
该产品的工作温度范围为-55℃~+155℃，覆盖了：
- 工业级标准（-40℃~+125℃）；
- 部分汽车级场景（-55℃~+150℃）。
厚膜电阻的工艺特点使其具有较好的耐温性与长期稳定性，经大毅科技可靠性测试（高温老化、温度循环、湿度老化等）验证，产品长期使用阻值漂移率低，可满足电子设备的寿命要求。
四、典型应用场景
RM06FTN3001因体积小、精度适中、宽温稳定等特点，广泛应用于以下领域：
- 消费电子：智能手机、平板电脑的电源管理单元（PMU）分压电路、信号滤波电路；
- 工业控制：PLC输入输出模块、传感器信号调理电路（如温度传感器信号放大后的分压）；
- 汽车电子：车载辅助仪表、小功率传感器模块（如胎压监测系统的信号处理电路）；
- 通信设备：基站射频前端辅助电路、小型路由器的电源稳压电路；
- 医疗设备：便携式血糖仪、血压计的信号采集电路（低功率、精密要求）。
五、产品优势总结
- 高密度适配：0603小体积封装，可有效节省PCB板级空间，适合便携设备与紧凑电路设计；
- 稳定可靠：宽温范围+厚膜工艺，确保恶劣环境下的性能一致性，长期故障率低；
- 性价比突出：±1%精度与±100ppm/℃温漂的组合，满足多数应用需求，成本优于更高精度产品；
- 供应链成熟：作为大毅科技的常规型号，市场供应稳定，可支持批量生产与小批量采购。
该产品是电子设计中替代同类0603封装3kΩ电阻的可靠选择，尤其适合对成本、体积与稳定性有平衡要求的应用场景。
Request for quote
Send RFQ
Use the form for single models, category sourcing, and multi-line BOM requirements.
Product sourcing intelligence
Model, package, availability, and BOM fit reviewed before quotation.
WMSIC turns product data, package visuals, BOM context, and sourcing signals into practical RFQ notes for buyers.
BOM matching & alternatives
BOM lines are compared by package, parameters, quantity, and workable alternatives for cleaner sourcing decisions.
Sourcing availability signal
Stock routes, quotation confidence, lead-time notes, and shipment feasibility are checked before sales follow-up.
Buyer sourcing scenarios
Examples of how common component sourcing requests are organized.
Typical RFQ scenarios based on the WMSIC form fields, catalog data, manual review steps, and shipment preparation workflow.
The buyer shares the full part number, package requirement, quantity, destination, and available product photos so the quotation can record the exact version under review.
A multi-line BOM is organized into direct sourcing lines, lines that need package clarification, and lines where alternative-part review is permitted.
The original manufacturer part number, datasheet revision, application, critical limits, and acceptable changes are collected before possible candidates are discussed.
Sample quantity, minimum packing, package format, target date, and courier destination are kept together in one RFQ conversation.
Package photos, model markings, board context, and the quantity needed for repair help focus the sourcing review on the relevant version.
When a suffix or package note is incomplete, the response records the open difference and requests buyer confirmation before procurement proceeds.
Packing format, carton notes, invoice details, courier option, destination, and tracking handoff are coordinated around the confirmed order.
The request connects the previously used model, current demand, package evidence, target timing, and replenishment sourcing route.
Related products
Packaged components ready for RFQ.
