Model & package intelligence
Model text, package form, tray or reel details, and visual evidence are reviewed together before RFQ feedback.
EVERLIGHT 67-03A/R6GHBHW-A01/2T/MS 67-03A
Configuration
1 options
Configuration
25+
Available for RFQ
Technical data
Product details
19
specifications
Core information
- Product name
- EVERLIGHT 67-03A / R6GHBHW-A01 / 2T / MS
- Type
- SMD3528-4P
- Minimum package
- 2000 个
Technical parameters
- Power
- G:95mW；R:60mW；B:95mW
- Electronic Component
- Electronic Component
- Electronic Component
- EVERLIGHT
- Electronic Component
- 67-03A/R6GHBHW-A01/2T/MS
- Electronic Component
- 1
- Electronic Component
- 2.8mm
- Package
- SMD3528-4P
- Electronic Component
- B:456.5nm~471.5nm；R:620.5nm~627.5nm；G:513.0nm~518.0nm
- Electronic Component
- RGB LED
- Electronic Component
- 0.063g
- Electronic Component
- 3.5mm
- Electronic Component
- 1.84mm
- Electronic Component
- 1
- LED
- G:650mcd~1350mcd；R:165mcd~288mcd；B:150mcd~310mcd
- LED
- 120°
- Electronic Component
- BM0230661377
For datasheets, package documents, compatible-part guidance, or other technical resources, contact WMSIC customer service. Availability is confirmed case by case.
EVERLIGHT 67-03A / R6GHBHW-A01/2T/MS 产品概述
一、产品简介
67-03A/R6GHBHW-A01/2T/MS 为台湾亿光（EVERLIGHT）出品的共阳式三色LED（RGB），封装为 SMD3528-4P。器件采用白色雾状透镜，发光角度宽达120°，适合指示、背光与装饰照明等要求均匀发光的场合。工作温度范围宽 (-40℃~+85℃)，可靠性满足一般工业与消费类电子应用需求。
二、主要特性
- 共阳极（Common Anode）设计，便于单端供电与独立驱动三色元件。
- 雾状透镜使光分布更均匀、视觉舒适、眩光低。
- 宽视角（120°）利于近距离面光或指示用途。
- 小型贴片封装（SMD3528-4P），适配常见表贴工艺与自动贴装。
三、光电参数
- 峰值波长：R 632 nm；G 518 nm；B 468 nm。
- 波长范围：R 620.5–627.5 nm；G 513.0–518.0 nm；B 456.5–471.5 nm。
- 发光强度（典型/范围）：G 650–1350 mcd；R 165–288 mcd；B 150–310 mcd。
- 正向电流：R/G/B 均为 20 mA（建议工作电流）。
- 功率耗散：G 95 mW；R 60 mW；B 95 mW。
- 抗静电能力（测试值）：R 2000 V；G 150 V；B 150 V（使用时需注意G/B相对较低的ESD耐受性）。
四、机械尺寸与封装
- 封装类型：SMD3528-4P（四引脚，含共阳引脚）。
- 外形尺寸：长 3.5 mm；宽 2.8 mm；高 1.84 mm。
- 透镜颜色：白色雾状，利于扩散与混色均匀性。
五、典型应用
- 面板及设备指示灯、状态显示。
- 仪表、消费电子背光与键盘指示。
- 装饰性照明及视觉效果控制（需PWM驱动进行色彩混合）。
- 小型信号灯、玩具与可穿戴设备（注意ESD保护与热管理）。
六、使用与焊接建议
- 推荐在20 mA工作点或以下使用并配以限流电阻或恒流驱动。
- 共阳结构在驱动设计上采用单端高电平共阳接法，三路阴极独立驱动。
- 焊接建议采用回流焊工艺，遵循厂商温度曲线以避免过热造成性能衰减。
- 由于G、B通道抗静电能力相对较低，装配与测试过程中应做好ESD防护（佩戴接地腕带、使用防静电台面）。
- 在高亮或连续点亮场合注意散热与热阻管理，以维持寿命与色彩稳定性。
以上为 67-03A/R6GHBHW-A01/2T/MS 的概述与使用要点，若需具体电气等效图、回流焊温度曲线或典型光学曲线，请提供进一步需求以便补充详细技术资料。
Request for quote
Send RFQ
Use the form for single models, category sourcing, and multi-line BOM requirements.
Product sourcing intelligence
Model, package, availability, and BOM fit reviewed before quotation.
WMSIC turns product data, package visuals, BOM context, and sourcing signals into practical RFQ notes for buyers.
BOM matching & alternatives
BOM lines are compared by package, parameters, quantity, and workable alternatives for cleaner sourcing decisions.
Sourcing availability signal
Stock routes, quotation confidence, lead-time notes, and shipment feasibility are checked before sales follow-up.
Buyer sourcing scenarios
Examples of how common component sourcing requests are organized.
Typical RFQ scenarios based on the WMSIC form fields, catalog data, manual review steps, and shipment preparation workflow.
The buyer shares the full part number, package requirement, quantity, destination, and available product photos so the quotation can record the exact version under review.
A multi-line BOM is organized into direct sourcing lines, lines that need package clarification, and lines where alternative-part review is permitted.
The original manufacturer part number, datasheet revision, application, critical limits, and acceptable changes are collected before possible candidates are discussed.
Sample quantity, minimum packing, package format, target date, and courier destination are kept together in one RFQ conversation.
Package photos, model markings, board context, and the quantity needed for repair help focus the sourcing review on the relevant version.
When a suffix or package note is incomplete, the response records the open difference and requests buyer confirmation before procurement proceeds.
Packing format, carton notes, invoice details, courier option, destination, and tracking handoff are coordinated around the confirmed order.
The request connects the previously used model, current demand, package evidence, target timing, and replenishment sourcing route.
Related products
Packaged components ready for RFQ.
(50 Pcs) TJ-S3528UG1W9TLC2R2G-A5 XL-3528RGBW-WS2812B XL-3528SURUBC XL-3528SURUGC XL-3528SURUGC-FJ SMD3528-4P
- Model
- TJ-S3528UG1W9TLC2R2G-A5
- Package
- SMD3528-4P