Model & package intelligence
Model text, package form, tray or reel details, and visual evidence are reviewed together before RFQ feedback.
EVERLIGHT 26-21/BHC-ATW/CT 26-21
Configuration
1 options
Configuration
26+
Available for RFQ
Technical data
Product details
19
specifications
Core information
- Product name
- EVERLIGHT 26-21 / BHC-ATW / CT
- Type
- EVERLIGHT
- Minimum package
- 1500 圆盘
Technical parameters
- Power
- 95mW
- Electronic Component
- Electronic Component
- Electronic Component
- EVERLIGHT
- Electronic Component
- 26-21/BHC-ATW/CT
- Electronic Component
- 1
- Package
- 1206
- Electronic Component
- 464.5nm~476.5nm
- Electronic Component
- LEDDiode / LED
- Electronic Component
- 0.037g
- Electronic Component
- 1
- LED
- 285mcd~1.8cd
- LED
- 30°
- LED
- Electronic Component
- Electronic Component
- BM0226163495
- Electronic Component
- 468nm
- Operating Temperature
- 40℃~+85℃
For datasheets, package documents, compatible-part guidance, or other technical resources, contact WMSIC customer service. Availability is confirmed case by case.
EVERLIGHT 26-21/BHC-ATW/CT 产品概述
一、产品简介
EVERLIGHT（亿光）26-21/BHC-ATW/CT 是一款 1206 封装的蓝色发光二极管（SMD、正贴）。器件采用无色透明透镜，峰值波长 468 nm，工作波长区间 464.5 nm ~ 476.5 nm，发光角度窄（30°），适合对汇聚光束有要求的指示和显示应用。
二、主要参数
- 正向电流（IF）：20 mA（典型最大工作电流）
- 最大功耗（Pd）：95 mW
- 峰值波长（λp）：468 nm；波长范围 464.5–476.5 nm
- 发光角度：30°（半值角）
- 工作温度范围：-40 ℃ ~ +85 ℃
- 发光颜色：蓝色
- 封装：1206（SMD，正贴）
- 透镜颜色：无色透明
三、特性与优势
- 小型 1206 封装，适合高密度 PCB 布局与自动贴装生产。
- 窄视角（30°）提供更集中的光束，适用于光学指示、对准指示或窗口式显示。
- 宽温工作范围，可靠性好，适用于工业级和户外环境。
- 透明透镜确保光色纯净、色散小。
四、典型应用
- 仪表/面板指示灯
- 信号灯与状态指示
- 精准指示/指向型照明
- 消费电子与通信设备光源
五、封装与安装建议
- 封装为 1206，兼容常见 1206 PCB 封装尺寸与贴片机工艺。
- 推荐遵循无铅回流焊工艺指南（峰值温度≤260 ℃，参照具体工厂工艺曲线），避免超温或长时间高温处理。
- 贴装时注意极性标识与取向，焊后宜做外观与电气检查。
六、使用与可靠性注意事项
- 必须使用限流元件（电阻或恒流源）控制 IF 不超过 20 mA；计算公式为 R = (Vs - Vf) / If（Vs 为电源电压，Vf 为 LED 正向电压）。
- 做好 ESD 防护与湿敏防护，长期存放遵循厂家包装与干燥柜建议。
- 由于最大功耗 95 mW，应关注 PCB 散热与焊盘设计，以保证长期稳定工作。
七、总结
26-21/BHC-ATW/CT 是一款针对需窄光束、高显色一致性与工业级温度范围的蓝色 SMD LED，适用于多种指示与显示场合。正确的驱动、电气与热管理可确保其在 -40 ℃ 至 +85 ℃ 条件下长期稳定运行。若需更详细的电气曲线、光强 (Iv) 或封装尺寸图纸，建议参考 EVERLIGHT 官方数据手册或联系供应商获取原厂资料。
Request for quote
Send RFQ
Use the form for single models, category sourcing, and multi-line BOM requirements.
Product sourcing intelligence
Model, package, availability, and BOM fit reviewed before quotation.
WMSIC turns product data, package visuals, BOM context, and sourcing signals into practical RFQ notes for buyers.
BOM matching & alternatives
BOM lines are compared by package, parameters, quantity, and workable alternatives for cleaner sourcing decisions.
Sourcing availability signal
Stock routes, quotation confidence, lead-time notes, and shipment feasibility are checked before sales follow-up.
Buyer sourcing scenarios
Examples of how common component sourcing requests are organized.
Typical RFQ scenarios based on the WMSIC form fields, catalog data, manual review steps, and shipment preparation workflow.
The buyer shares the full part number, package requirement, quantity, destination, and available product photos so the quotation can record the exact version under review.
A multi-line BOM is organized into direct sourcing lines, lines that need package clarification, and lines where alternative-part review is permitted.
The original manufacturer part number, datasheet revision, application, critical limits, and acceptable changes are collected before possible candidates are discussed.
Sample quantity, minimum packing, package format, target date, and courier destination are kept together in one RFQ conversation.
Package photos, model markings, board context, and the quantity needed for repair help focus the sourcing review on the relevant version.
When a suffix or package note is incomplete, the response records the open difference and requests buyer confirmation before procurement proceeds.
Packing format, carton notes, invoice details, courier option, destination, and tracking handoff are coordinated around the confirmed order.
The request connects the previously used model, current demand, package evidence, target timing, and replenishment sourcing route.
Related products
Packaged components ready for RFQ.
