Model & package intelligence
Model text, package form, tray or reel details, and visual evidence are reviewed together before RFQ feedback.
ElecSuper ESD5341N-ES ESD5341N
Configuration
1 options
Configuration
26+
Available for RFQ
Technical data
Product details
19
specifications
Core information
- Product name
- Elec Super ESD5341N-ES
- Type
- ELECSUPER
- Minimum package
- 10000 圆盘
Technical parameters
- Electronic Component
- Electronic Component
- Electronic Component
- ELECSUPER
- Electronic Component
- ESD5341N-ES
- Electronic Component
- 1
- Package
- DFN1006-2L
- Electronic Component
- Electronic Component
- Type
- ESD
- Electronic Component
- ESD and Surge Protection (TVS / ESD)
- Electronic Component
- 0.012g
- Electronic Component
- 1
- Channel Count
- Electronic Component
- Cj- Capacitor
- 0.5pF
- Electronic Component
- BM0226338696
- Voltage
- 15V
- Electronic Component
- IEC 61000-4-2
- Current(Ir)
- 1uA
For datasheets, package documents, compatible-part guidance, or other technical resources, contact WMSIC customer service. Availability is confirmed case by case.
ESD5341N-ES 产品概述
一、产品简介
ESD5341N-ES 是 ElecSuper（静芯微）推出的一款单路单向瞬态电压抑制器，专为接口线上静电放电（ESD）和脉冲浪涌保护而设计。器件采用小型 DFN1006-2L 封装，占板面积小，适合手机、可穿戴、摄像头模组、USB/串口和高速数据接口等空间受限且对信号完整性要求高的应用场景。
二、主要特性
- 单路、单向 ESD 保护器件，接口到地的快速夹位放电路径。
- 钳位电压约 15V（视脉冲电流和测试条件而定），有效限制过压对下游电路的损伤。
- 低结电容 Cj ≈ 0.5pF，最大限度降低对高速信号的影响，适合高速数据线保护。
- 极低反向漏电流 Ir ≤ 1µA，适用于低功耗系统。
- 符合 IEC 61000-4-2 ESD 等级测试要求。
三、电气参数（典型/最大值）
- 反向截止电压 Vrwm：5V
- 击穿电压（Vbr）：6V（典型）
- 钳位电压（Vclamp）：15V（典型）
- 峰值脉冲功率 Ppp：60W @ 8/20µs
- 峰值脉冲电流 Ipp：4A
- 反向电流 Ir：1µA（最大）
- 结电容 Cj：0.5pF（典型）
- 通道数：1 路，极性：单向
- 封装：DFN1006-2L
四、典型应用
- 手机和可穿戴设备的按键、天线和外设接口保护
- USB、HDMI、MIPI、CSI、LVDS 等高速数据信号线的 ESD 保护
- 摄像头模块、传感器输入、音频线路的入口保护
- 工业控制和消费电子设备的 I/O 接口防护
五、封装与 PCB 布局建议
- 器件采用 DFN1006-2L 小型封装，焊盘需尽量靠近被保护的连接器或接口，缩短走线以降低寄生感抗。
- 将器件的接地端尽快与系统地面相连，建议在器件地焊盘附近放置短、粗的过孔（VIA）直通地平面，保证快速放电回路。
- 在保护器件与被保护信号之间避免串联过长阻抗或滤波元件（除非有特殊设计需求），以确保 ESD 能迅速触发并泄放。
- 在多层 PCB 上，推荐在器件下方保留接地铜皮并通过多条过孔连接，以减小回路电感。
六、可靠性与合规
ESD5341N-ES 设计满足 IEC 61000-4-2 静电放电抗扰度要求，可承受典型的接触/空气放电事件（具体等级与测试条件请参考详细数据手册）。同时具备良好的热稳定性和小封装机械可靠性，适合大批量消费类产品应用。
七、选型建议与注意事项
- 适用于工作电压不高于 Vrwm（5V）的信号线；对 5V 总线应用应谨慎评估裕量。
- 若需要双向保护或更高能量吸收，请选用相应的双向或更高功率型号。
- ESD 抑制能力与实际钳位电压、泄放路径及 PCB 布局密切相关，建议在样机验证阶段进行实际放电测试。
- 为延长器件寿命，避免长时间重复承受接近器件极限的脉冲能量。
如需芯片封装尺寸图、焊盘建议、典型特性曲线或完整数据手册，可进一步索取详细资料或样品验证。
Request for quote
Send RFQ
Use the form for single models, category sourcing, and multi-line BOM requirements.
Product sourcing intelligence
Model, package, availability, and BOM fit reviewed before quotation.
WMSIC turns product data, package visuals, BOM context, and sourcing signals into practical RFQ notes for buyers.
BOM matching & alternatives
BOM lines are compared by package, parameters, quantity, and workable alternatives for cleaner sourcing decisions.
Sourcing availability signal
Stock routes, quotation confidence, lead-time notes, and shipment feasibility are checked before sales follow-up.
Buyer sourcing scenarios
Examples of how common component sourcing requests are organized.
Typical RFQ scenarios based on the WMSIC form fields, catalog data, manual review steps, and shipment preparation workflow.
The buyer shares the full part number, package requirement, quantity, destination, and available product photos so the quotation can record the exact version under review.
A multi-line BOM is organized into direct sourcing lines, lines that need package clarification, and lines where alternative-part review is permitted.
The original manufacturer part number, datasheet revision, application, critical limits, and acceptable changes are collected before possible candidates are discussed.
Sample quantity, minimum packing, package format, target date, and courier destination are kept together in one RFQ conversation.
Package photos, model markings, board context, and the quantity needed for repair help focus the sourcing review on the relevant version.
When a suffix or package note is incomplete, the response records the open difference and requests buyer confirmation before procurement proceeds.
Packing format, carton notes, invoice details, courier option, destination, and tracking handoff are coordinated around the confirmed order.
The request connects the previously used model, current demand, package evidence, target timing, and replenishment sourcing route.
Related products
Packaged components ready for RFQ.
