Model & package intelligence
Model text, package form, tray or reel details, and visual evidence are reviewed together before RFQ feedback.
ETA ETA5060V0D2G
Configuration
1 options
Configuration
26+
Available for RFQ
Technical data
Product details
19
specifications
Core information
- Product name
- ETA ETA5060V0D2G
- Type
- ETA
- Minimum package
- 3000 圆盘
Technical parameters
- Electronic Component
- Electronic Component
- Electronic Component
- 140mV@(1A)
- Electronic Component
- ETA
- Electronic Component
- ETA5060V0D2G
- Electronic Component
- 1
- Package
- DFN-6(2x2)
- Electronic Component
- Linear Regulator(LDO)
- Electronic Component
- 0.097g
- Electronic Component
- 1
- Features
- Built-in;; Output
- Electronic Component
- BM0264335156
- Operating Temperature
- 40℃~+85℃@(Ta)
- Operating Voltage
- 5.5V
- Output
- Electronic Component
- Output Voltage
- 800mV~5V
- Output Current
- 1A
For datasheets, package documents, compatible-part guidance, or other technical resources, contact WMSIC customer service. Availability is confirmed case by case.
ETA5060V0D2G 产品概述
一、产品简介
ETA5060是一款高性能、低压差线性稳压器（LDO），输出极性为正极，支持可调输出，输出电压范围为0.8V至5.0V，最大输出电流1A。该器件在1A负载时压差仅为140mV，适合对效率与空间有较高要求的便携与电池供电系统。工作电压范围宽（1.8V ~ 5.5V），并集成多项保护与控制功能，封装为DFN-6（2×2），适用于尺寸受限的应用。
二、主要规格
- 输入电压范围：1.8V ~ 5.5V
- 可调输出电压：0.8V ~ 5.0V（通过外部电阻设定）
- 最大输出电流：1A
- 压差（Dropout）：140mV @ 1A
- 静态电流（Iq）：20µA
- PSRR：68dB @ 100Hz
- 工作温度：-40℃ ~ +85℃（Ta）
- 输出通道：1路，正极输出
- 封装：DFN-6（2×2）
- 型号品牌：ETA（钰泰）
三、功能特点
- 内置软启动，限制启动冲击电流与输出过冲
- 使能控制（EN），支持电源顺序与低功耗待机
- 输出放电功能，禁用时能快速放空输出电容
- 过流保护、短路保护与热关断，提升系统可靠性
- 低静态电流适合电池供电与休眠应用
- 可调输出通过反馈电阻设置，参考电压为0.8V，VOUT = 0.8 × (1 + R1/R2)
示例：要得到3.3V输出，R1/R2 ≈ 3.125；若选R2 = 10kΩ，则R1 ≈ 31.6kΩ。
四、典型应用场景
- 便携式消费电子（智能穿戴、便携仪器）
- 电池供电的物联网设备与传感器节点
- 摄像头模组、射频模块的本地稳压供电
- 需要低压差、低噪声电源的模拟与数字混合系统
五、使用建议与注意事项
- 输出电容：建议使用低ESR陶瓷电容（X5R/X7R 系列），典型值范围参考数据手册以保证稳定性与瞬态响应。
- 布局：输入、输出与地线尽量短且宽，地层与散热焊盘利于热量释放；FB与外部电阻应靠近芯片布置，避免噪声注入。
- 启动与保护：利用软启动与EN脚实现平滑上电；系统设计时留出过流与热关断余量以防异常工况。
六、封装与选型
ETA5060V0D2G采用DFN-6（2×2）小型封装，适合高密度PCB设计。选型时请参考完整数据手册中的极限参数、热阻与典型应用电路，以确保在目标工况下满足性能与可靠性要求。
如需进一步电气特性曲线、典型应用电路或PCB布局示意，可提供更详细资料以便针对具体应用优化设计。
Request for quote
Send RFQ
Use the form for single models, category sourcing, and multi-line BOM requirements.
Product sourcing intelligence
Model, package, availability, and BOM fit reviewed before quotation.
WMSIC turns product data, package visuals, BOM context, and sourcing signals into practical RFQ notes for buyers.
BOM matching & alternatives
BOM lines are compared by package, parameters, quantity, and workable alternatives for cleaner sourcing decisions.
Sourcing availability signal
Stock routes, quotation confidence, lead-time notes, and shipment feasibility are checked before sales follow-up.
Buyer sourcing scenarios
Examples of how common component sourcing requests are organized.
Typical RFQ scenarios based on the WMSIC form fields, catalog data, manual review steps, and shipment preparation workflow.
The buyer shares the full part number, package requirement, quantity, destination, and available product photos so the quotation can record the exact version under review.
A multi-line BOM is organized into direct sourcing lines, lines that need package clarification, and lines where alternative-part review is permitted.
The original manufacturer part number, datasheet revision, application, critical limits, and acceptable changes are collected before possible candidates are discussed.
Sample quantity, minimum packing, package format, target date, and courier destination are kept together in one RFQ conversation.
Package photos, model markings, board context, and the quantity needed for repair help focus the sourcing review on the relevant version.
When a suffix or package note is incomplete, the response records the open difference and requests buyer confirmation before procurement proceeds.
Packing format, carton notes, invoice details, courier option, destination, and tracking handoff are coordinated around the confirmed order.
The request connects the previously used model, current demand, package evidence, target timing, and replenishment sourcing route.
Related products
Packaged components ready for RFQ.
1 Piece Integrated Circuit for IRS20124S IRS21956S SOP-20 IRS2453DS SOP-14
- Model
- IRS20124S
- Package
