Model & package intelligence
Model text, package form, tray or reel details, and visual evidence are reviewed together before RFQ feedback.
FH RS-03K2612FT
Configuration
1 options
Configuration
Date code within 2 years
Available for RFQ
Technical data
Product details
19
specifications
Core information
- Product name
- FH RS-03K2612FT
- Type
- FH
- Minimum package
- 5000 圆盘
Technical parameters
- Power
- 100mW
- Electronic Component
- Electronic Component
- Electronic Component
- FH
- Electronic Component
- RS-03K2612FT
- Electronic Component
- 1
- Package
- 0603
- Electronic Component
- SMD Resistor
- Electronic Component
- ±1%
- Electronic Component
- 0.03g
- Electronic Component
- 26.1kΩ
- Electronic Component
- 1
- Electronic Component
- BM0263547931
- Operating Temperature
- 55℃~+155℃
- Operating Voltage
- 50V
- Electronic Component
- ±100ppm/℃
- Resistor Type
- Resistor
For datasheets, package documents, compatible-part guidance, or other technical resources, contact WMSIC customer service. Availability is confirmed case by case.
RS-03K2612FT 产品概述
一、产品简介
RS-03K2612FT 是风华（FH）品牌的一款贴片厚膜电阻，封装为 0603（1608公制）。该型号标称阻值为 26.1kΩ，阻值精度为 ±1%，额定功率 100mW，适用于空间受限且对阻值精度有一定要求的消费电子、通信、电源与测控类设备。
二、主要技术参数
- 电阻类型：厚膜贴片电阻
- 阻值：26.1 kΩ
- 精度：±1%（1/100）
- 额定功率：100 mW（基于标准环境散热条件）
- 最高工作电压：50 V
- 温度系数（TCR）：±100 ppm/℃
- 工作温度范围：-55 ℃ ~ +155 ℃
- 封装：0603（英制：0603；公制：1608）
- 品牌：FH（风华）
三、产品特点
- 稳定的阻值与较高精度（±1%），适合对电阻偏差控制有要求的电路。
- 小型化封装（0603），便于高密度布板和节省空间。
- 宽温度范围（-55℃ 至 +155℃），适用于严苛环境下的长期工作。
- 较低的温度系数（±100 ppm/℃），有利于降低因温度变化带来的阻值漂移。
- 额定电压 50V，满足常见低压电子系统的电压需求。
四、典型应用场景
- 移动设备与可穿戴设备中的分压、偏置与限流电路。
- 消费类电子、仪表与传感器前端的阻值精度要求场合。
- 工业控制、通信设备中的一般电子网络与滤波电路。
- 多路复用与电路调试中作为阻值基准或阻网络单元。
五、封装与安装建议
- 0603 封装适合自动贴装（SMT）与标准回流焊工艺。建议参考 PCB 阻焊与焊盘设计规范，保证焊点可靠性。
- 在高温或高功耗条件下，应评估 PCB 的散热能力并考虑局部降额以避免长期过热。
- 贴片元件应避免在回流、手工焊接或清洗过程中承受过度机械应力或化学侵蚀，遵循厂家推荐的焊接与清洗工艺。
六、选型与使用注意事项
- 功率降额：额定 100 mW 通常基于特定环境与散热条件，实际使用时需考虑环境温度及 PCB 散热路径。高温环境下应采取相应降额措施以保证可靠性。
- 温度影响：±100 ppm/℃ 的 TCR 表明温度变化会引起阻值随之变化，温度敏感电路请预留容差或选择更低 TCR 的型号。
- 最大工作电压：50 V 为元件允许的安全工作电压，超过该值可能导致绝缘击穿或寿命缩短。
- 考虑老化与长时间漂移，某些精密应用建议做初期配合老化测试与必要的校准。
七、储存与质量保证
- 建议在干燥、常温、避免强光和化学污染的环境中储存，避免潮湿导致锡膏或焊接问题。
- 风华出品，出厂前通过常规电阻值与外观检验；具体的可靠性与寿命数据可依据批次试验报告或与供应商确认。
如需扩展的可靠性试验数据、回流焊曲线建议或替代封装/阻值的推荐清单，可提供进一步需求，我可依据应用场景给出更具体的设计与选型建议。
Request for quote
Send RFQ
Use the form for single models, category sourcing, and multi-line BOM requirements.
Product sourcing intelligence
Model, package, availability, and BOM fit reviewed before quotation.
WMSIC turns product data, package visuals, BOM context, and sourcing signals into practical RFQ notes for buyers.
BOM matching & alternatives
BOM lines are compared by package, parameters, quantity, and workable alternatives for cleaner sourcing decisions.
Sourcing availability signal
Stock routes, quotation confidence, lead-time notes, and shipment feasibility are checked before sales follow-up.
Buyer sourcing scenarios
Examples of how common component sourcing requests are organized.
Typical RFQ scenarios based on the WMSIC form fields, catalog data, manual review steps, and shipment preparation workflow.
The buyer shares the full part number, package requirement, quantity, destination, and available product photos so the quotation can record the exact version under review.
A multi-line BOM is organized into direct sourcing lines, lines that need package clarification, and lines where alternative-part review is permitted.
The original manufacturer part number, datasheet revision, application, critical limits, and acceptable changes are collected before possible candidates are discussed.
Sample quantity, minimum packing, package format, target date, and courier destination are kept together in one RFQ conversation.
Package photos, model markings, board context, and the quantity needed for repair help focus the sourcing review on the relevant version.
When a suffix or package note is incomplete, the response records the open difference and requests buyer confirmation before procurement proceeds.
Packing format, carton notes, invoice details, courier option, destination, and tracking handoff are coordinated around the confirmed order.
The request connects the previously used model, current demand, package evidence, target timing, and replenishment sourcing route.
Related products
Packaged components ready for RFQ.
1 Piece BGA Integrated Circuit Chipset MN864739 CXD90061GG CXD90062GG PS5 QFN-80
- Model
- MN864739
- Package
