Model & package intelligence
Model text, package form, tray or reel details, and visual evidence are reviewed together before RFQ feedback.
FH CBG160808U102T
Configuration
1 options
Configuration
25+
Available for RFQ
Technical data
Product details
19
specifications
Core information
- Product name
- FH CBG160808U102T
- Type
- FH
- Minimum package
- 4000 圆盘
Technical parameters
- Electronic Component
- Electronic Component
- Electronic Component
- FH
- Electronic Component
- CBG160808U102T
- Electronic Component
- 1
- Package
- 0603
- Electronic Component
- Ferrite Bead
- Electronic Component
- ±25%
- Electronic Component
- 0.03g
- Electronic Component
- 1
- Channel Count
- 1
- Electronic Component
- BM0257282685
- Current
- 200mA
- @Frequency
- 1kΩ@100MHz
- Resistor(DCR)
- 600mΩ
- Electronic Component
- Electronic Component
- Electronic Component
- 4000
For datasheets, package documents, compatible-part guidance, or other technical resources, contact WMSIC customer service. Availability is confirmed case by case.
CBG160808U102T 产品概述
一、产品简介
CBG160808U102T 是风华（FH）推出的一款表面贴装磁珠（0603/1608封装），用于单通道高频干扰抑制。标称阻抗为1kΩ@100MHz，直流电阻(DCR)约600mΩ，允许电流200mA，阻抗公差±25%。该器件结构紧凑，适合空间受限且对射频干扰抑制有较高要求的移动、通信与消费电子应用。
二、主要性能参数
- 型号：CBG160808U102T
- 品牌：FH（风华）
- 封装：0603（1608公制）单通道
- 阻抗：1kΩ @ 100MHz，公差 ±25%
- 直流电阻（DCR）：约 600mΩ（20°C）
- 额定电流：200mA（持续直流电流）
- 适用频段：中高频 EMI 抑制为主
三、产品特点
- 高阻抗：在100MHz处阻抗高达1kΩ，有效衰减高频噪声。
- 低DCR：600mΩ 的直流电阻在保证信号/电源电流传输的同时减少功耗。
- 小型化：0603 封装利于高密度布板与自动贴装。
- 单通道设计：适用于单线电源或信号线的滤波与抑制。
- 工艺成熟，可靠性好，适配量产 SMT 工艺。
四、典型应用
- 手机、平板、可穿戴设备的供电与信号滤波。
- 无线通信模组与射频前端的高频噪声抑制。
- 摄像头、传感器接口及高速数字线路的去耦与干扰管理。
- 汽车电子（低速信号/辅助电路）、工业控制小电流回路。
五、设计与使用建议
- 布局：磁珠应尽量靠近噪声源（如IC的电源引脚或信号入口）并短距离接地回路，避免长走线引入寄生。
- 电流裕量：尽量留有裕量，实际工况建议按额定电流的70%〜80%选型以保证阻抗特性与热稳定。
- 焊接：遵循常规回流焊工艺，峰值温度不超过规范（一般≤260°C），焊接时间与温度曲线避免过暴露，以免影响器件特性。
- 测试注意：阻抗参数在特定测试条件下给出（标准环境、测量夹具），实际电路中受寄生电感电容与布局影响，建议在目标板上进行验证。
六、可靠性与包装
风华出厂前完成常规可靠性测试（温度循环、湿热、机械冲击、焊接热稳定性等）。包装形式适合SMT贴片生产（卷盘包装），便于自动化生产线直接使用。选型时应结合实际工作温度、潮湿及机械应力等环境因素，必要时与供应商确认详细可靠性数据与样品测试结果。
Request for quote
Send RFQ
Use the form for single models, category sourcing, and multi-line BOM requirements.
Product sourcing intelligence
Model, package, availability, and BOM fit reviewed before quotation.
WMSIC turns product data, package visuals, BOM context, and sourcing signals into practical RFQ notes for buyers.
BOM matching & alternatives
BOM lines are compared by package, parameters, quantity, and workable alternatives for cleaner sourcing decisions.
Sourcing availability signal
Stock routes, quotation confidence, lead-time notes, and shipment feasibility are checked before sales follow-up.
Buyer sourcing scenarios
Examples of how common component sourcing requests are organized.
Typical RFQ scenarios based on the WMSIC form fields, catalog data, manual review steps, and shipment preparation workflow.
The buyer shares the full part number, package requirement, quantity, destination, and available product photos so the quotation can record the exact version under review.
A multi-line BOM is organized into direct sourcing lines, lines that need package clarification, and lines where alternative-part review is permitted.
The original manufacturer part number, datasheet revision, application, critical limits, and acceptable changes are collected before possible candidates are discussed.
Sample quantity, minimum packing, package format, target date, and courier destination are kept together in one RFQ conversation.
Package photos, model markings, board context, and the quantity needed for repair help focus the sourcing review on the relevant version.
When a suffix or package note is incomplete, the response records the open difference and requests buyer confirmation before procurement proceeds.
Packing format, carton notes, invoice details, courier option, destination, and tracking handoff are coordinated around the confirmed order.
The request connects the previously used model, current demand, package evidence, target timing, and replenishment sourcing route.
Related products
Packaged components ready for RFQ.
