Model & package intelligence
Model text, package form, tray or reel details, and visual evidence are reviewed together before RFQ feedback.
FMD FT61F020-URT FT61F020
Configuration
1 options
Configuration
26+
Available for RFQ
Technical data
Product details
19
specifications
Core information
- Product name
- FMD FT61F020-URT
- Type
- FMD
- Minimum package
- 3000 圆盘
Technical parameters
- Electronic Component
- Electronic Component
- Electronic Component
- FMD
- Electronic Component
- FT61F020-URT
- Electronic Component
- 1
- Package
- SOT-23-6
- Electronic Component
- MCU(MCU / MPU / SOC)
- Electronic Component
- 0.042g
- CPU
- Other
- I / O
- 4
- Electronic Component
- 1
- ADC
- 10bit
- Electronic Component
- BM0264898150
- CPU
- 16MHz
- Electronic Component
- Electronic Component
- Electronic Component
- 3000
- Electronic Component
- 2KB
For datasheets, package documents, compatible-part guidance, or other technical resources, contact WMSIC customer service. Availability is confirmed case by case.
FT61F020-URT 单片机产品概述
FT61F020-URT是辉芒微（FMD） 针对入门级小型电子设备推出的一款超紧凑RISC架构单片机，核心围绕“小体积、低成本、基础功能整合”设计，适配对空间、成本敏感且功能需求简单的应用场景。
一、产品核心定位与应用方向
该MCU定位为入门级控制核心，不追求复杂功能扩展，而是聚焦“够用即省”的设计逻辑：
- 目标场景：空间受限的小型设备（如穿戴配件、电子玩具）、电池供电的低功耗节点（如传感器采集器）、低成本批量应用（如小家电辅助控制）；
- 核心价值：用最小封装实现基础控制+数据采集功能，平衡性能与成本。
二、核心硬件参数详解
基于辉芒微自研RISC精简指令集内核，关键参数如下：
参数项 具体规格 备注 CPU内核 辉芒微自研RISC架构 非ARM内核，指令集精简易开发 最大主频 16MHz 满足基础运算需求 程序存储 2KB FLASH 擦写次数≥10万次，数据保持≥10年 数据存储 128Byte SRAM 运行时临时数据存储 模拟外设 10bit ADC 转换速度≤10μs，支持IO复用（2~3通道） 数字IO 4个通用IO口 部分支持外部中断、推挽/开漏输出 电源范围 2.0V~5.5V 适配纽扣电池、AA/AAA电池等常见电源 低功耗性能 待机电流≤1μA，运行电流≤1mA（16MHz） 电池供电设备续航保障 工作温度 0℃~70℃（商业级） 满足消费电子、小型家电等场景三、SOT-23-6封装与引脚配置
FT61F020-URT采用SOT-23-6超小型贴片封装，尺寸仅2.9mm×1.6mm×1.1mm，是同类产品中体积最小的封装之一，适配高密度PCB设计：
引脚功能说明（典型配置）：
- VDD：电源正极（2.0V~5.5V）；
- GND：电源地；
- P00/ADC0：通用IO口，复用10bit ADC通道0；
- P01/INT0：通用IO口，复用外部中断0；
- P02：通用IO口；
- P03：通用IO口。
注：引脚功能可通过寄存器配置调整，部分IO支持推挽/开漏输出、上拉/下拉电阻使能。
四、关键优势与设计亮点
- 超紧凑体积：SOT-23-6封装比常见的TSSOP-8缩小约60%，可嵌入小型设备（如耳机配件、钥匙扣电子）；
- 低功耗适配：待机电流≤1μA，一次纽扣电池可支持设备运行数月，适合电池供电场景；
- 成本控制：2KB FLASH+128Byte SRAM的容量设计，避免“性能过剩”，降低单颗成本；
- 开发易用：配套辉芒微官方IDE（FMD Code Wizard），支持C语言开发，示例代码丰富，入门门槛低；
- 可靠性保障：FLASH存储擦写次数≥10万次，抗干扰设计满足消费电子级基本要求。
五、典型应用案例
- 小型LED控制：小夜灯亮度调节、定时开关（通过IO模拟PWM实现）；
- 传感器采集节点：温湿度传感器（如DHT11）数据采集，通过IO模拟串口上报；
- 简单按键设备：小型遥控器（4个IO实现3~4键控制）、电子锁按键检测；
- 小家电辅助控制：加湿器水位检测（ADC采集）、小型风扇风速切换；
- 电子玩具：发声发光玩具的核心控制（如LED闪烁、蜂鸣器驱动）。
总结
FT61F020-URT以“小而精”的设计，填补了入门级小型电子设备的控制空白——既没有复杂功能的冗余成本，又能满足基础控制+数据采集需求，尤其适合对体积、成本敏感的批量应用场景。对于需要快速落地、降低BOM成本的项目，是极具性价比的选择。
Request for quote
Send RFQ
Use the form for single models, category sourcing, and multi-line BOM requirements.
Product sourcing intelligence
Model, package, availability, and BOM fit reviewed before quotation.
WMSIC turns product data, package visuals, BOM context, and sourcing signals into practical RFQ notes for buyers.
BOM matching & alternatives
BOM lines are compared by package, parameters, quantity, and workable alternatives for cleaner sourcing decisions.
Sourcing availability signal
Stock routes, quotation confidence, lead-time notes, and shipment feasibility are checked before sales follow-up.
Buyer sourcing scenarios
Examples of how common component sourcing requests are organized.
Typical RFQ scenarios based on the WMSIC form fields, catalog data, manual review steps, and shipment preparation workflow.
The buyer shares the full part number, package requirement, quantity, destination, and available product photos so the quotation can record the exact version under review.
A multi-line BOM is organized into direct sourcing lines, lines that need package clarification, and lines where alternative-part review is permitted.
The original manufacturer part number, datasheet revision, application, critical limits, and acceptable changes are collected before possible candidates are discussed.
Sample quantity, minimum packing, package format, target date, and courier destination are kept together in one RFQ conversation.
Package photos, model markings, board context, and the quantity needed for repair help focus the sourcing review on the relevant version.
When a suffix or package note is incomplete, the response records the open difference and requests buyer confirmation before procurement proceeds.
Packing format, carton notes, invoice details, courier option, destination, and tracking handoff are coordinated around the confirmed order.
The request connects the previously used model, current demand, package evidence, target timing, and replenishment sourcing route.
Related products
Packaged components ready for RFQ.
