Model & package intelligence
Model text, package form, tray or reel details, and visual evidence are reviewed together before RFQ feedback.
Nationstar NCD0603R6
Configuration
1 options
Configuration
Date code within 2 years
Available for RFQ
Technical data
Product details
19
specifications
Core information
- Product name
- Photoelectric NCD0603R6
- Type
- Nationstar
- Minimum package
- 4000 圆盘
Technical parameters
- Power
- 65mW
- Electronic Component
- Electronic Component
- Electronic Component
- Photoelectric
- Electronic Component
- NCD0603R6
- Electronic Component
- 1
- Package
- 0603
- Electronic Component
- 620nm~630nm
- Electronic Component
- LEDDiode / LED
- Electronic Component
- 0.023g
- Electronic Component
- 1
- LED
- 80mcd
- LED
- 140°
- LED
- Electronic Component
- Electronic Component
- BM0226420392
- Electronic Component
- 630nm
- Operating Temperature
- 30℃~+85℃
For datasheets, package documents, compatible-part guidance, or other technical resources, contact WMSIC customer service. Availability is confirmed case by case.
NCD0603R6（国星光电）产品概述
一、产品简介
NCD0603R6 是国星光电推出的一款 0603 封装红色贴片发光二极管（LED），面向高密度表面贴装（SMT）应用。该器件峰值波长 630nm，发光颜色为纯红，适用于指示、背光和微型显示等场合。小巧的 0603 封装兼顾了体积与发光性能，便于在空间受限的电路板上布置大量指示点。
二、主要参数
- 正向电流（If）：25 mA（最大额定值）
- 峰值波长（λp）：630 nm（波长范围 620–630 nm）
- 发光强度：80 mcd（典型）
- 发光角度：140°（宽视角）
- 功率：65 mW（最大）
- 正向压降（Vf）：1.6–2.4 V
- 工作温度：-30 ℃ 至 +85 ℃
- 封装：0603（SMD）
- 品牌：国星光电
三、性能特点
- 低功耗、高亮度：在允许的工作电流下提供稳定的光强输出，适合电池供电或低功耗系统。
- 宽发散角 140°：出光均匀，便于指示和面光源设计，减少对光学扩散件的依赖。
- 小型封装：0603 大幅节省PCB空间，适合高密度布板与微型化产品。
- 宽工作温度范围：可以在较宽的环境温度下稳定工作，适配工业和车载等场景（需按应用验证）。
四、应用场合
- 指示灯与状态显示（消费电子、仪表、家电）
- 背光与标识照明（键盘、开关面板）
- 小型信号灯与光学传感标记
- 可用于部分车内非关键指示场合（需符合车规额定与认证）
五、典型电路与使用建议
驱动推荐使用恒流源或串联限流电阻以保护 LED。常用计算：R = (Vcc - Vf) / If。举例：当 Vcc = 5V，目标 If = 20 mA，取 Vf 典型值 1.9 V，则 R ≈ (5 - 1.9) / 0.02 ≈ 155 Ω，可选 150 Ω 或 160 Ω。设计时应考虑 Vf 在 1.6–2.4V 的变化范围、温升及 PCB 降额。
六、封装与焊接提示
- 0603 小体积对回流焊工艺敏感，建议严格控制回流曲线（按照国星光电推荐的回流温度曲线）。
- 建议使用适配的锡膏印刷量和焊盘尺寸以保证焊点可靠性和热传导。
- 避免二次热循环过多，焊接前后注意静电防护（ESD）。
七、可靠性与储存
- 在常温、干燥条件下密封保存，避免潮湿导致元件吸湿后回流焊起泡。
- 长期储存建议遵循厂商的储存说明（防潮包装、保质期内使用）。
- 出厂通常经过光电测试、老化筛选，建议在关键应用前进行可靠性验证（高低温、湿热、振动等）。
八、质量保证与选型建议
选择 NCD0603R6 时请确认批次与规格书一致，必要时索取样品和详细数据手册进行评估。对于需要车规或更高可靠性认证的项目，建议与供应商确认相应资质与可用的测试数据。
如需更详细的电光特性曲线、封装尺寸图或回流焊建议曲线，我可以进一步提供或整理成技术文档。
Request for quote
Send RFQ
Use the form for single models, category sourcing, and multi-line BOM requirements.
Product sourcing intelligence
Model, package, availability, and BOM fit reviewed before quotation.
WMSIC turns product data, package visuals, BOM context, and sourcing signals into practical RFQ notes for buyers.
BOM matching & alternatives
BOM lines are compared by package, parameters, quantity, and workable alternatives for cleaner sourcing decisions.
Sourcing availability signal
Stock routes, quotation confidence, lead-time notes, and shipment feasibility are checked before sales follow-up.
Buyer sourcing scenarios
Examples of how common component sourcing requests are organized.
Typical RFQ scenarios based on the WMSIC form fields, catalog data, manual review steps, and shipment preparation workflow.
The buyer shares the full part number, package requirement, quantity, destination, and available product photos so the quotation can record the exact version under review.
A multi-line BOM is organized into direct sourcing lines, lines that need package clarification, and lines where alternative-part review is permitted.
The original manufacturer part number, datasheet revision, application, critical limits, and acceptable changes are collected before possible candidates are discussed.
Sample quantity, minimum packing, package format, target date, and courier destination are kept together in one RFQ conversation.
Package photos, model markings, board context, and the quantity needed for repair help focus the sourcing review on the relevant version.
When a suffix or package note is incomplete, the response records the open difference and requests buyer confirmation before procurement proceeds.
Packing format, carton notes, invoice details, courier option, destination, and tracking handoff are coordinated around the confirmed order.
The request connects the previously used model, current demand, package evidence, target timing, and replenishment sourcing route.
Related products
Packaged components ready for RFQ.
