Model & package intelligence
Model text, package form, tray or reel details, and visual evidence are reviewed together before RFQ feedback.
Nationstar NCD1615RG1
Configuration
1 options
Configuration
25+
Available for RFQ
Technical data
Product details
19
specifications
Core information
- Product name
- Photoelectric NCD1615RG1
- Type
- Nationstar
- Minimum package
- 4000 圆盘
Technical parameters
- Power
- 72mW；52mW
- Electronic Component
- Electronic Component
- Electronic Component
- Photoelectric
- Electronic Component
- NCD1615RG1
- Electronic Component
- 1
- Package
- 0606
- Electronic Component
- 625nm；525nm
- Electronic Component
- LEDDiode / LED
- Electronic Component
- 0.02g
- Electronic Component
- 1
- LED
- 260mcd；150mcd
- LED
- 130°
- LED
- Electronic Component
- Electronic Component
- BM0226419499
- Operating Temperature
- 30℃~+85℃
- Current
- 20mA
For datasheets, package documents, compatible-part guidance, or other technical resources, contact WMSIC customer service. Availability is confirmed case by case.
NCD1615RG1 产品概述
一、产品简介
NCD1615RG1 是国星光电推出的一款小型双色独立二极管封装指示灯，采用0606正贴封装设计。器件内含两颗独立发光二极管，分别为橙红色（625nm）与翠绿色（525nm），适用于高密度贴片电路板的状态指示与小型背光场合，结构紧凑、视角宽广且易于自动化贴装。
二、核心参数
- 正向电流（If）：20 mA（每颗二极管）
- 最大功率耗散：72 mW（某色） / 52 mW（另一色）
- 峰值波长：625 nm（橙红） / 525 nm（翠绿）
- 发光强度（Iv）：260 mcd（橙红） / 150 mcd（翠绿）
- 发光角度：130°（典型）
- 正向压降（Vf）：3.2 V（橙红） / 2.0 V（翠绿）
- 工作温度范围：-30℃ ～ +85℃
- 封装：0606，正贴（SMT）
- 二极管配置：独立二极管（可单独驱动）
三、主要特性
- 色彩对比明显，橙红与翠绿组合适合状态提示（如报警/正常、充电/完成等）。
- 宽视角（130°）保证在偏离正轴视角下仍有良好可见度。
- 0606 封装兼容现代 SMT 生产线，利于体积受限产品的布板与自动化贴装。
- 工作温度范围广，可满足一般工业、消费电子环境要求。
四、使用建议
- 驱动时必须使用限流电阻或恒流源以保护LED。示例：5V 电源下，对于橙红（Vf≈3.2V，If=20mA）建议电阻 R = (5−3.2)/0.02 ≈ 90Ω（可选 91Ω/100Ω）；对于翠绿（Vf≈2.0V，If=20mA）R ≈ 150Ω。
- 若需延长寿命或降低功耗，可将工作电流降至 10–15 mA，同时亮度仍能满足多数指示需求。
- 焊接建议采用标准回流工艺，遵循国星光电数据手册中的温度曲线与湿敏等级规范，避免过高瞬时峰值温度。
- 注意静电防护（ESD），在贴装与测试过程中采取相应防护措施。
五、典型应用
- 工业与民用设备面板指示灯
- 便携式设备与穿戴设备的状态提示
- 家用电器、仪表、通讯设备指示
- 物联网节点、电子玩具、小型显示背光点亮
六、封装与可靠性
0606 正贴封装尺寸小、热阻较低，适合密集布线。器件工作温度范围 -30℃ 至 +85℃，在额定电流与合理散热条件下可长期稳定工作。建议在设计时考虑PCB散热、限流以及环境湿度防护以提升可靠性。
七、采购与资料参考
NCD1615RG1 由国星光电提供，建议在采购与设计前查阅厂家完整 datasheet 以确认详细电气参数、回流焊曲线与机械尺寸图。实际选型时可根据系统电源、电路布局与亮度需求对驱动策略与电阻值进行最终调整。
Request for quote
Send RFQ
Use the form for single models, category sourcing, and multi-line BOM requirements.
Product sourcing intelligence
Model, package, availability, and BOM fit reviewed before quotation.
WMSIC turns product data, package visuals, BOM context, and sourcing signals into practical RFQ notes for buyers.
BOM matching & alternatives
BOM lines are compared by package, parameters, quantity, and workable alternatives for cleaner sourcing decisions.
Sourcing availability signal
Stock routes, quotation confidence, lead-time notes, and shipment feasibility are checked before sales follow-up.
Buyer sourcing scenarios
Examples of how common component sourcing requests are organized.
Typical RFQ scenarios based on the WMSIC form fields, catalog data, manual review steps, and shipment preparation workflow.
The buyer shares the full part number, package requirement, quantity, destination, and available product photos so the quotation can record the exact version under review.
A multi-line BOM is organized into direct sourcing lines, lines that need package clarification, and lines where alternative-part review is permitted.
The original manufacturer part number, datasheet revision, application, critical limits, and acceptable changes are collected before possible candidates are discussed.
Sample quantity, minimum packing, package format, target date, and courier destination are kept together in one RFQ conversation.
Package photos, model markings, board context, and the quantity needed for repair help focus the sourcing review on the relevant version.
When a suffix or package note is incomplete, the response records the open difference and requests buyer confirmation before procurement proceeds.
Packing format, carton notes, invoice details, courier option, destination, and tracking handoff are coordinated around the confirmed order.
The request connects the previously used model, current demand, package evidence, target timing, and replenishment sourcing route.
Related products
Packaged components ready for RFQ.
