Model & package intelligence
Model text, package form, tray or reel details, and visual evidence are reviewed together before RFQ feedback.
Nationstar FC-1608C1-570
Configuration
1 options
Configuration
26+
Available for RFQ
Technical data
Product details
19
specifications
Core information
- Product name
- Photoelectric FC-1608C1-570
- Type
- Nationstar
- Minimum package
- 4000 未知
Technical parameters
- Power
- 65mW
- Electronic Component
- Electronic Component
- Electronic Component
- Photoelectric
- Electronic Component
- FC-1608C1-570
- Electronic Component
- 1
- Package
- 0603
- Electronic Component
- 565nm~578nm
- Electronic Component
- LEDDiode / LED
- Electronic Component
- 0.022g
- Electronic Component
- 1
- LED
- 13mcd
- LED
- 140°
- LED
- Electronic Component
- Electronic Component
- BM0264688750
- Electronic Component
- 576nm
- Operating Temperature
- 30℃~+85℃
For datasheets, package documents, compatible-part guidance, or other technical resources, contact WMSIC customer service. Availability is confirmed case by case.
FC-1608C1-570 产品概述
一、产品简介
FC-1608C1-570 是国星光电（NationStar）出品的一款 0603 小型贴片发光二极管（SMD LED），发光颜色为黄绿色（峰值波长 576nm）。该器件体积微小（1.6 × 0.8 × 0.6 mm），光通量与功耗比优越，适用于各类对体积和能耗有严格要求的指示与背光场景。
二、主要技术参数
- 发光颜色：黄绿色
- 峰值波长：576 nm（波长范围 565–578 nm）
- 正向电压 Vf：1.6 V ~ 2.6 V
- 典型工作电流 If：5 mA（额定）
- 最大功率：65 mW（器件额定功耗）
- 发光强度：13 mcd（典型）
- 发光角度：140°
- 工作温度：-30 ℃ ~ +85 ℃
- 封装规格：0603（尺寸 1.6 × 0.8 × 0.6 mm）
- 二极管配置：独立二极管
三、电气与光学特性说明
在典型工作条件（If = 5 mA）下，器件的正向功耗大约为 Vf × If（约 8 mW ~ 13 mW），远低于最大额定功率 65 mW，保证了低功耗与长寿命。140° 的大视角提供宽广的可视范围，13 mcd 的光强可满足一般指示与局部背光应用。正向电压具有一定范围波动，设计电路时建议按最小和最大 Vf 分别计算电流限制元件以确保一致性。
建议串联限流电阻的计算方法：R = (Vcc - Vf) / If。举例：
- 以 Vcc = 3.3 V、目标 If = 5 mA，按 Vf = 1.6 V 时 R ≈ 340 Ω（常用 330 Ω）；按 Vf = 2.6 V 时 R ≈ 140 Ω（常用 150 Ω）。
- 以 Vcc = 5 V、目标 If = 5 mA，按 Vf = 1.6 V 时 R ≈ 680 Ω（常用 680 Ω）；按 Vf = 2.6 V 时 R ≈ 480 Ω（常用 470 Ω）。 建议为保证亮度一致性和器件安全，以 Vf 的最小值进行设计并预留余量。
四、典型应用场景
- 仪器仪表与指示灯（按钮、状态指示）
- 可穿戴设备与移动设备指示/装饰光
- 物联网终端、消费电子的状态反馈与背光
- 医疗设备、安防和车载辅助指示（依据认证要求）
五、封装与机械信息
0603 小外形（1.6 × 0.8 × 0.6 mm），适配标准贴片生产线，实现高密度装配。独立二极管结构便于焊接与分路驱动。建议按照国星光电推荐的回流焊工艺曲线进行贴装，避免超温、超时导致寿命下降或封装损伤。
六、可靠性与使用建议
该器件具有光强高、功耗低、可靠性好和寿命长的特点。为保障长期稳定性，建议：
- 遵循回流焊工艺规范与温度曲线；
- 设计限流保护，避免过压或过流工作；
- 生产和储存期间防潮、防静电；
- 在高温或高湿环境中采用适当的封装或散热设计。
如需更详细的电学曲线、波长分布或回流焊曲线，请参照国星光电官方产品规格书或联系供应商获取完整数据手册。
Request for quote
Send RFQ
Use the form for single models, category sourcing, and multi-line BOM requirements.
Product sourcing intelligence
Model, package, availability, and BOM fit reviewed before quotation.
WMSIC turns product data, package visuals, BOM context, and sourcing signals into practical RFQ notes for buyers.
BOM matching & alternatives
BOM lines are compared by package, parameters, quantity, and workable alternatives for cleaner sourcing decisions.
Sourcing availability signal
Stock routes, quotation confidence, lead-time notes, and shipment feasibility are checked before sales follow-up.
Buyer sourcing scenarios
Examples of how common component sourcing requests are organized.
Typical RFQ scenarios based on the WMSIC form fields, catalog data, manual review steps, and shipment preparation workflow.
The buyer shares the full part number, package requirement, quantity, destination, and available product photos so the quotation can record the exact version under review.
A multi-line BOM is organized into direct sourcing lines, lines that need package clarification, and lines where alternative-part review is permitted.
The original manufacturer part number, datasheet revision, application, critical limits, and acceptable changes are collected before possible candidates are discussed.
Sample quantity, minimum packing, package format, target date, and courier destination are kept together in one RFQ conversation.
Package photos, model markings, board context, and the quantity needed for repair help focus the sourcing review on the relevant version.
When a suffix or package note is incomplete, the response records the open difference and requests buyer confirmation before procurement proceeds.
Packing format, carton notes, invoice details, courier option, destination, and tracking handoff are coordinated around the confirmed order.
The request connects the previously used model, current demand, package evidence, target timing, and replenishment sourcing route.
Related products
Packaged components ready for RFQ.
