Model & package intelligence
Model text, package form, tray or reel details, and visual evidence are reviewed together before RFQ feedback.
HGSEMI CD4066DM/TR CD4066DM
Configuration
1 options
Configuration
26+
Available for RFQ
Technical data
Product details
19
specifications
Core information
- Product name
- HGSEMI CD4066DM / TR
- Type
- HGSEMI
- Minimum package
- 2500 圆盘
Technical parameters
- Electronic Component
- Electronic Component
- Electronic Component
- HGSEMI
- Electronic Component
- CD4066DM/TR
- Electronic Component
- 1
- Package
- SOP-14
- Electronic Component
- Analog Switch / Multiplexer
- Electronic Component
- 0.293g
- Electronic Component
- 1
- Channel Count
- 4
- Features
- Analog
- Electronic Component
- BM0227584794
- Operating Temperature
- 20℃~+85℃
- Operating Voltage
- 3V~15V
- Switch
- 1:1
- (tpd)
- 30ns
- Resistor(Ron)
- 240Ω
For datasheets, package documents, compatible-part guidance, or other technical resources, contact WMSIC customer service. Availability is confirmed case by case.
CD4066DM/TR 产品概述
一、产品简介
CD4066DM/TR（华冠 HGSEMI）为四通道双向模拟/数字开关器件，封装为 SOP-14，通常以带盘（TR，Tape & Reel）方式供应。器件内部包含 4 个独立的单刀单掷（SPST）开关，适用于在供电轨间传递模拟或数字信号。工作温度范围为 -20℃ 至 +85℃。
二、主要技术参数
- 工作电压：3V ~ 15V（宽电源范围，兼容单电源或双电源系统）
- 通道数：4（四路独立开关）
- 导通电阻（Ron）：典型 240Ω（视工作电压与输入信号幅度而变化）
- 传播延迟（tpd）：约 30ns（开关响应时间，影响高速切换性能）
- 封装：SOP-14（标准 14 引脚小外形封装）
三、功能特点
- 双向传输：每一路开关可双向传输信号，支持正负或单极性信号（在供电范围内）。
- 低静态电流：典型 CMOS 工艺，控制端静态电流小，有利于低功耗设计。
- 独立控制：四通道独立控制，灵活实现多路复用或信号路由。
- 封装与装配：SOP-14 便于 PCB 布局与自动化贴装，TR 盘装适合批量生产。
四、典型应用场景
- 音频/视频信号路由与切换
- 模数/数模前端的多路选择与采样保持切换
- 测试测量仪器中信号路径隔离与切换
- 低频模拟信号的开关与隔离、数字逻辑信号过渡控制
五、使用建议与注意事项
- 去耦电容：在 VCC 与 GND 之间靠近器件引脚放置 0.1µF 陶瓷去耦电容，以保证稳压与切换瞬态性能。
- 电源与信号范围：输入/输出信号应限定在供电轨范围内（VSS~VDD），超出可能引起导通失真或损坏。
- 导通电阻考虑：Ron 约 240Ω，适合低电流或阻抗匹配场合；若用于低阻负载或精密模拟通道，需考虑 Ron 带来的衰减或失真。
- 开关速度与残留：切换时存在传播延迟、串扰和电荷注入，针对高精度模拟应用需评估影响并采取补偿措施。
- 环境与散热：在高温或高频连续切换下注意功耗与封装散热，确保工作温度在 -20℃~+85℃ 范围内。
六、选型与替代
CD4066DM/TR 适合对成本、封装和通用开关功能有需求的设计。若需更低的导通电阻、更快的开关速度或更宽的工作温度（工业级），可考虑专用模拟开关器件或更先进工艺的替代型号。在选型时应综合考量信号频率、幅度、负载阻抗及系统功耗要求。
以上为 CD4066DM/TR 的概述与应用建议，可作为电路设计与元器件选型的参考。
Request for quote
Send RFQ
Use the form for single models, category sourcing, and multi-line BOM requirements.
Product sourcing intelligence
Model, package, availability, and BOM fit reviewed before quotation.
WMSIC turns product data, package visuals, BOM context, and sourcing signals into practical RFQ notes for buyers.
BOM matching & alternatives
BOM lines are compared by package, parameters, quantity, and workable alternatives for cleaner sourcing decisions.
Sourcing availability signal
Stock routes, quotation confidence, lead-time notes, and shipment feasibility are checked before sales follow-up.
Buyer sourcing scenarios
Examples of how common component sourcing requests are organized.
Typical RFQ scenarios based on the WMSIC form fields, catalog data, manual review steps, and shipment preparation workflow.
The buyer shares the full part number, package requirement, quantity, destination, and available product photos so the quotation can record the exact version under review.
A multi-line BOM is organized into direct sourcing lines, lines that need package clarification, and lines where alternative-part review is permitted.
The original manufacturer part number, datasheet revision, application, critical limits, and acceptable changes are collected before possible candidates are discussed.
Sample quantity, minimum packing, package format, target date, and courier destination are kept together in one RFQ conversation.
Package photos, model markings, board context, and the quantity needed for repair help focus the sourcing review on the relevant version.
When a suffix or package note is incomplete, the response records the open difference and requests buyer confirmation before procurement proceeds.
Packing format, carton notes, invoice details, courier option, destination, and tracking handoff are coordinated around the confirmed order.
The request connects the previously used model, current demand, package evidence, target timing, and replenishment sourcing route.
Related products
Packaged components ready for RFQ.
