Model & package intelligence
Model text, package form, tray or reel details, and visual evidence are reviewed together before RFQ feedback.
HCI 0132M4-10.240F12DZNG 0132M4
Configuration
1 options
Configuration
26+
Available for RFQ
Technical data
Product details
19
specifications
Core information
- Product name
- HCI 0132M4-10.240F12DZNG
- Type
- HCI
- Minimum package
- 3000 圆盘
Technical parameters
- Electronic Component
- Electronic Component
- Electronic Component
- HCI
- Electronic Component
- 0132M4-10.240F12DZNG
- Electronic Component
- 1
- Package
- SMD3225-4P
- Electronic Component
- Passive Crystal Oscillator
- Electronic Component
- 0.052g
- Frequency
- 10.24MHz
- Electronic Component
- 1
- Electronic Component
- BM0264982143
- Operating Temperature
- 40℃~+125℃
- Electronic Component
- ±10ppm
- Crystal Oscillator Type
- SMDCrystal Oscillator
- Load Capacitor
- 12pF
- Frequency
- ±50ppm
- Electronic Component
- Electronic Component
For datasheets, package documents, compatible-part guidance, or other technical resources, contact WMSIC customer service. Availability is confirmed case by case.
0132M4-10.240F12DZNG 产品概述
一、产品简介
0132M4-10.240F12DZNG 是杭晶（HCI）推出的全国产化贴片金属晶振，工作频率为 10.24 MHz，封装为 SMD3225-4P（3225 尺寸、4 脚引脚）。器件针对工业级及高可靠性场景设计，工作温度范围宽（-40℃~+125℃），适合在严苛环境下提供稳定时钟源。
二、主要特性
- 频率：10.24 MHz
- 常温频差（Initial Accuracy）：±10 ppm
- 频率稳定度（含温度、老化等）：±50 ppm
- 负载电容：12 pF（典型）
- 等效串联电阻（ESR）：100 Ω（典型）
- 工作温度：-40℃ ~ +125℃
- 封装：SMD3225-4P（金属贴片封装）
- 品牌：HCI（杭晶），国产化供货，供应链本地化优势明显
三、技术优势
- 金属封装提供良好屏蔽性与机械强度，有利于抗震动和温度突变时保持频率稳定。
- 宽温工作范围与较小的常温频差，满足工业控制、通信和测量设备对精确时钟的要求。
- 负载电容 12 pF 与常见振荡器输入电路兼容性好；封装尺寸小，便于高密度贴片组装。
四、典型应用
- 工业控制与自动化设备时钟源
- 通信设备和网络设备参考时钟
- 嵌入式系统与微控制器晶振（需匹配外部晶体振荡器电路）
- 精密测量与采样系统（基于 10.24 MHz 的分频/时钟链路）
五、设计与选型建议
- 对于负载电容为 12 pF 的晶振，常见 PCB 杂散电容（约 23 pF）计入后，建议两侧并联电容约 1820 pF（C1=C2），以获得接近标称负载。
- ESR=100 Ω 时，应确认目标振荡器/放大器电路具有足够的回授增益以启动振荡；若采用专用晶振输入的微控制器，优先参考器件手册推荐值。
- 布局上应将晶振与振荡器引脚相近并缩短走线，旁路和接地采取局部实地铜箔，避免噪声耦合。
- 建议遵循厂家回流焊工艺规范，避免过热或机械应力影响长期可靠性。
六、注意事项
- 在高振幅驱动下可能导致晶体老化或损坏，请避免超过厂家规定的驱动电平（详见技术手册）。
- 选型时根据系统对频率稳定度的要求（温度、老化、应力）留有裕量；如需更高精度可咨询定制化方案。
0132M4-10.240F12DZNG 以其工业级温度范围、良好的频率精度和国产化供货优势，适合需要可靠本地供应和稳定时钟性能的各类电子系统。若需更详细的时序参数、老化数据或封装图纸，可向杭晶（HCI）索取完整产品规格书。
Request for quote
Send RFQ
Use the form for single models, category sourcing, and multi-line BOM requirements.
Product sourcing intelligence
Model, package, availability, and BOM fit reviewed before quotation.
WMSIC turns product data, package visuals, BOM context, and sourcing signals into practical RFQ notes for buyers.
BOM matching & alternatives
BOM lines are compared by package, parameters, quantity, and workable alternatives for cleaner sourcing decisions.
Sourcing availability signal
Stock routes, quotation confidence, lead-time notes, and shipment feasibility are checked before sales follow-up.
Buyer sourcing scenarios
Examples of how common component sourcing requests are organized.
Typical RFQ scenarios based on the WMSIC form fields, catalog data, manual review steps, and shipment preparation workflow.
The buyer shares the full part number, package requirement, quantity, destination, and available product photos so the quotation can record the exact version under review.
A multi-line BOM is organized into direct sourcing lines, lines that need package clarification, and lines where alternative-part review is permitted.
The original manufacturer part number, datasheet revision, application, critical limits, and acceptable changes are collected before possible candidates are discussed.
Sample quantity, minimum packing, package format, target date, and courier destination are kept together in one RFQ conversation.
Package photos, model markings, board context, and the quantity needed for repair help focus the sourcing review on the relevant version.
When a suffix or package note is incomplete, the response records the open difference and requests buyer confirmation before procurement proceeds.
Packing format, carton notes, invoice details, courier option, destination, and tracking handoff are coordinated around the confirmed order.
The request connects the previously used model, current demand, package evidence, target timing, and replenishment sourcing route.
Related products
Packaged components ready for RFQ.
