Model & package intelligence
Model text, package form, tray or reel details, and visual evidence are reviewed together before RFQ feedback.
HCI XC63M4-25.000-F20JJDT XC63M4
Configuration
1 options
Configuration
26+
Available for RFQ
Technical data
Product details
19
specifications
Core information
- Product name
- HCI XC63M4-25.000-F20JJDT
- Type
- HCI
- Minimum package
- 1000 圆盘
Technical parameters
- Electronic Component
- Electronic Component
- Electronic Component
- HCI
- Electronic Component
- XC63M4-25.000-F20JJDT
- Electronic Component
- 1
- Package
- SMD6035-4P
- Electronic Component
- Passive Crystal Oscillator
- Electronic Component
- 0.1g
- Frequency
- 25MHz
- Electronic Component
- 1
- Electronic Component
- BM0264820045
- Operating Temperature
- 40℃~+85℃
- Electronic Component
- ±30ppm
- Crystal Oscillator Type
- SMDCrystal Oscillator
- Load Capacitor
- 20pF
- Frequency
- ±30ppm
- Electronic Component
- Electronic Component
For datasheets, package documents, compatible-part guidance, or other technical resources, contact WMSIC customer service. Availability is confirmed case by case.
XC63M4-25.000-F20JJDT 贴片石英晶振产品概述
XC63M4-25.000-F20JJDT是杭晶电子（HCI）推出的一款工业级贴片石英晶振，针对25MHz频率需求场景设计，兼顾小型化封装与稳定的频率输出，适用于消费电子、工业控制及通信终端等多领域，是中精度时钟源的实用选择。
一、产品定位与核心属性
该晶振属于石英晶体谐振器范畴，核心定位为中精度、宽温区、小型化的通用频率器件。其频率精度满足大多数中低端电子设备的时钟需求，同时-40℃~+85℃的工作温度范围覆盖了户外设备、工业现场等极端环境，避免了普通民用晶振在温度变化下的频率漂移问题，成本与性能平衡优势明显。
二、关键性能参数解析
- 频率与精度：标称频率25MHz，常温频差±30ppm（对应频率偏差≤750Hz），频率稳定度与常温频差一致（±30ppm），说明在全工作温度范围内频率漂移控制在可接受范围，适合单片机时钟、串口通信波特率参考等对同步要求不苛刻但需稳定输出的场景。
- 负载电容与ESR：负载电容20pF，需外部电路匹配20pF电容以实现最佳谐振效果；等效串联电阻（ESR）40Ω，属于石英晶振常规低阻水平，可降低谐振损耗、提升电路稳定性，减少长期使用发热。
- 温度特性：工作温度范围-40℃~+85℃，符合工业级I级温度要求，可在北方户外设备（低温）、工业控制柜（高温）等场景稳定工作，无需额外温控措施。
三、封装与物理特性
采用SMD6035-4P封装，尺寸为6.0mm×3.5mm×1.5mm（长×宽×高），4脚贴片结构，适配表面贴装工艺，可通过自动化贴片机批量生产，适合智能手环、工业传感器模块、路由器等小型化设备的PCB布局。封装材质为陶瓷外壳，具备防潮、抗冲击性能，提升产品可靠性。
四、应用场景适配性
该晶振的参数特性使其适配多类场景：
- 消费电子：智能穿戴设备（蓝牙时钟参考）、便携式音响（音频同步）；
- 工业控制：PLC模块（采样时钟）、工业传感器（数据传输基准）；
- 通信终端：路由器、交换机（以太网PHY芯片匹配25MHz时钟）；
- 汽车电子：车载USB接口、仪表盘辅助时钟（温区接近车规要求，需结合具体车规认证）。
五、可靠性与环境适应性
HCI对该产品完成常规可靠性测试：
- 振动测试：承受10~2000Hz扫频振动，满足设备运输及使用中的振动环境；
- 焊接可靠性：支持回流焊工艺（符合J-STD-020标准），无封装开裂风险；
- 老化特性：预老化处理降低初期频率漂移，提升长期使用稳定性。
补充说明：该晶振无内置负载电容，需外部匹配20pF电容；若需更高精度（如±10ppm内），需选择更高级别产品，但XC63M4-25.000-F20JJDT在成本可控场景下具备实用价值。
Request for quote
Send RFQ
Use the form for single models, category sourcing, and multi-line BOM requirements.
Product sourcing intelligence
Model, package, availability, and BOM fit reviewed before quotation.
WMSIC turns product data, package visuals, BOM context, and sourcing signals into practical RFQ notes for buyers.
BOM matching & alternatives
BOM lines are compared by package, parameters, quantity, and workable alternatives for cleaner sourcing decisions.
Sourcing availability signal
Stock routes, quotation confidence, lead-time notes, and shipment feasibility are checked before sales follow-up.
Buyer sourcing scenarios
Examples of how common component sourcing requests are organized.
Typical RFQ scenarios based on the WMSIC form fields, catalog data, manual review steps, and shipment preparation workflow.
The buyer shares the full part number, package requirement, quantity, destination, and available product photos so the quotation can record the exact version under review.
A multi-line BOM is organized into direct sourcing lines, lines that need package clarification, and lines where alternative-part review is permitted.
The original manufacturer part number, datasheet revision, application, critical limits, and acceptable changes are collected before possible candidates are discussed.
Sample quantity, minimum packing, package format, target date, and courier destination are kept together in one RFQ conversation.
Package photos, model markings, board context, and the quantity needed for repair help focus the sourcing review on the relevant version.
When a suffix or package note is incomplete, the response records the open difference and requests buyer confirmation before procurement proceeds.
Packing format, carton notes, invoice details, courier option, destination, and tracking handoff are coordinated around the confirmed order.
The request connects the previously used model, current demand, package evidence, target timing, and replenishment sourcing route.
Related products
Packaged components ready for RFQ.
