Model & package intelligence
Model text, package form, tray or reel details, and visual evidence are reviewed together before RFQ feedback.
HCI 1553H-100.000KWVDTSL 1553H
Configuration
1 options
Configuration
26+
Available for RFQ
Technical data
Product details
19
specifications
Core information
- Product name
- HCI 1553H-100.000KWVDTSL
- Type
- HCI
- Minimum package
- 1000 圆盘
Technical parameters
- Electronic Component
- Electronic Component
- Electronic Component
- HCI
- Electronic Component
- 1553H-100.000KWVDTSL
- Electronic Component
- 1
- Package
- SMD5032-4P
- Electronic Component
- Active Crystal Oscillator
- Electronic Component
- 0.114g
- Frequency
- 100MHz
- Electronic Component
- 1
- Electronic Component
- BM0264982107
- Operating Temperature
- 40℃~+85℃
- Operating Voltage
- 1.8V~3.3V
- Operating Current
- 20mA
- Electronic Component
- ±10ppm
- Output
- HCMOS
- Frequency
- ±15ppm
For datasheets, package documents, compatible-part guidance, or other technical resources, contact WMSIC customer service. Availability is confirmed case by case.
1553H-100.000KWVDTSL 产品概述
一、产品简介
1553H-100.000KWVDTSL 为 HCI（杭晶）出品的高精度表贴晶振模块，标称频率 100.000 MHz。采用 SMD5032-4P 封装，输出方式为 HCMOS，专为对频率精度与长期可靠性有较高要求的数字系统设计，适用于通信、测试测量、网络设备及高速逻辑时钟源等场景。
二、主要性能特点
- 频率：100.000 MHz，常温频差（25℃）：±10 ppm，频率稳定度：±15 ppm（覆盖全温域或指定条件下）。
- 输出模式：HCMOS，兼容 1.8V / 2.5V / 3.3V 电平，方便直接驱动 FPGA、ASIC、微控制器与逻辑阵列。
- 工作电压：1.8 V ～ 3.3 V 宽电压供电，适配多种电源设计。
- 工作电流：典型 20 mA，满足高速输出驱动能力的同时兼顾功耗控制。
- 封装与机械：SMD5032-4P，体积小，适合高密度贴装与自动化贴片工艺。
- 可靠性高，温度范围：-40 ℃ ～ +85 ℃，适应工业级应用环境。
三、典型应用
- 通信基站与光模块本振
- 网络交换与路由设备时钟源
- 测试测量仪器（示波器、频谱仪等）
- FPGA/ASIC 时钟分配、同步与参考源
- 工业控制与汽车电子（符合工作温度要求的场合）
四、技术规格（关键参数）
- 型号：1553H-100.000KWVDTSL（HCI）
- 频率：100.000 MHz
- 常温频差（25 ℃）：±10 ppm
- 频率稳定度：±15 ppm
- 输出模式：HCMOS（TTL/CMOS 兼容电平，随供电电压调整）
- 工作电压：1.8 V ～ 3.3 V
- 工作电流：20 mA（典型）
- 工作温度：-40 ℃ ～ +85 ℃
- 封装：SMD5032-4P（5032 尺寸，4 引脚）
五、封装与使用注意
- 封装小型化，建议采用推荐的 PCB 焊盘与回流工艺，注意焊接温度曲线以保证可靠性。
- 推荐在 VCC 近端加入 0.1 μF 陶瓷去耦电容，减小电源噪声对频率输出的影响。
- 输入与输出线尽量短直，避免长走线引入干扰或阻抗不匹配。
六、可靠性与环境适应性
产品经过工业级筛选，能在宽温范围与典型电磁环境下长期稳定工作。建议在高振动或极端环境下进行系统级验证，以确保满足特定应用的可靠性需求。
七、订购信息与建议
- 品牌：HCI（杭晶），封装：SMD5032-4P。
- 订购时请按频率、封装、频差与温度等级确认型号；大批量采购可咨询厂商样片与加速老化测试报告。
以上为 1553H-100.000KWVDTSL 的主要概述，适合用于对频率精度与稳定性有较高要求的各类高速数字与通信系统。
Request for quote
Send RFQ
Use the form for single models, category sourcing, and multi-line BOM requirements.
Product sourcing intelligence
Model, package, availability, and BOM fit reviewed before quotation.
WMSIC turns product data, package visuals, BOM context, and sourcing signals into practical RFQ notes for buyers.
BOM matching & alternatives
BOM lines are compared by package, parameters, quantity, and workable alternatives for cleaner sourcing decisions.
Sourcing availability signal
Stock routes, quotation confidence, lead-time notes, and shipment feasibility are checked before sales follow-up.
Buyer sourcing scenarios
Examples of how common component sourcing requests are organized.
Typical RFQ scenarios based on the WMSIC form fields, catalog data, manual review steps, and shipment preparation workflow.
The buyer shares the full part number, package requirement, quantity, destination, and available product photos so the quotation can record the exact version under review.
A multi-line BOM is organized into direct sourcing lines, lines that need package clarification, and lines where alternative-part review is permitted.
The original manufacturer part number, datasheet revision, application, critical limits, and acceptable changes are collected before possible candidates are discussed.
Sample quantity, minimum packing, package format, target date, and courier destination are kept together in one RFQ conversation.
Package photos, model markings, board context, and the quantity needed for repair help focus the sourcing review on the relevant version.
When a suffix or package note is incomplete, the response records the open difference and requests buyer confirmation before procurement proceeds.
Packing format, carton notes, invoice details, courier option, destination, and tracking handoff are coordinated around the confirmed order.
The request connects the previously used model, current demand, package evidence, target timing, and replenishment sourcing route.
Related products
Packaged components ready for RFQ.
