Model & package intelligence
Model text, package form, tray or reel details, and visual evidence are reviewed together before RFQ feedback.
Hottech ABS10
Configuration
1 options
Configuration
26+
Available for RFQ
Technical data
Product details
19
specifications
Core information
- Product name
- Hottech ABS10
- Type
- HOTTECH
- Minimum package
- 5000 圆盘
Technical parameters
- Electronic Component
- Electronic Component
- Electronic Component
- HOTTECH
- Electronic Component
- ABS10
- Electronic Component
- 1
- Package
- ABS
- Type
- Electronic Component
- Electronic Component
- Bridge Rectifier
- Electronic Component
- 0.127g
- Electronic Component
- 1
- Electronic Component
- BM0229946193
- Current
- 1A
- Current(Ir)
- 5uA@1000V
- Electronic Component
- 55℃~+150℃
- Electronic Component
- Electronic Component
- Electronic Component
- 5000
For datasheets, package documents, compatible-part guidance, or other technical resources, contact WMSIC customer service. Availability is confirmed case by case.
ABS10 产品概述
一、产品简介
ABS10 是 Hottech（合科泰）推出的一款单相整流桥，封装为 ABS 塑封结构，适用于对体积、成本有要求的小功率整流场合。器件额定整流电流为 1A，支持宽范围工作结温（-55℃ ～ +150℃），具有良好的高压耐受能力和较低的漏电流特性，适合通用电源和工业控制等应用。
二、主要电气参数
- 额定平均整流电流：1A（连续工作）
- 正向压降：约 0.95V @ 0.4A（典型）；约 1.1V @ 1.0A（保证或测试条件下）
- 直流反向耐压：常见 800V 型号（描述值）；另有高压测试条件下可见 1000V 相关参数（基础参数提及）
- 反向电流：约 10μA @ 800V（典型）；在 1000V 测试条件下可见 5μA（依据不同测试或型号）
- 非重复峰值浪涌电流 Ifsm：35A（单次半周期浪涌）
- 工作结温范围：-55℃ ～ +150℃
注：以上为用户提供信息汇总的典型/测试值，具体器件应以出厂数据表为准。
三、封装与机械特性
ABS 塑封桥堆体积小、成本低，便于通过波峰焊或手工焊接到印制板。器件通常在封装上标注极性和交流输入/直流输出端，通过合理布局可实现良好散热。适合空间受限的模块级电源设计。
四、热管理与使用建议
- 连续 1A 工作时，注意 PCB 铜箔散热设计，适当增加散热面积或使用过孔导热以降低结温。
- 避免长期在高结温（>125℃）下运行以延长寿命。
- 对于含有大幅度反向电压尖峰的环境，建议并联抑制元件（如 RC 吸收、TVS）以避免超过器件峰值应力。
- 焊接时遵循无铅或有铅工艺的温度曲线，避免过高的峰值温度和过长的加热时间。
五、典型应用场景
- 小功率开关电源输入整流
- 工业与仪表电源模块
- 充电器、电池管理前端整流
- 家电与照明驱动的低成本整流方案
六、可靠性与选型要点
选择时应关注反向耐压与反向漏电流在目标工作电压下的表现；若系统在高电压或高温工况长期运行，优先选择耐压和漏电参数余量较大的型号。Hottech（合科泰）品牌提供的 ABS10 在通用场合具备良好性价比，但对关键应用建议参照完整数据手册并做实际电气/热仿真与寿命验证。
总结：ABS10 为一款适用于通用小功率整流的 1A 单相整流桥，结合合理的 PCB 散热与过压保护，可在多种电源与控制场景中稳定工作。若需最终设计参数和封装尺寸，请以合科泰数据表为准并联系供应商获取型号确认与样品测试。
Request for quote
Send RFQ
Use the form for single models, category sourcing, and multi-line BOM requirements.
Product sourcing intelligence
Model, package, availability, and BOM fit reviewed before quotation.
WMSIC turns product data, package visuals, BOM context, and sourcing signals into practical RFQ notes for buyers.
BOM matching & alternatives
BOM lines are compared by package, parameters, quantity, and workable alternatives for cleaner sourcing decisions.
Sourcing availability signal
Stock routes, quotation confidence, lead-time notes, and shipment feasibility are checked before sales follow-up.
Buyer sourcing scenarios
Examples of how common component sourcing requests are organized.
Typical RFQ scenarios based on the WMSIC form fields, catalog data, manual review steps, and shipment preparation workflow.
The buyer shares the full part number, package requirement, quantity, destination, and available product photos so the quotation can record the exact version under review.
A multi-line BOM is organized into direct sourcing lines, lines that need package clarification, and lines where alternative-part review is permitted.
The original manufacturer part number, datasheet revision, application, critical limits, and acceptable changes are collected before possible candidates are discussed.
Sample quantity, minimum packing, package format, target date, and courier destination are kept together in one RFQ conversation.
Package photos, model markings, board context, and the quantity needed for repair help focus the sourcing review on the relevant version.
When a suffix or package note is incomplete, the response records the open difference and requests buyer confirmation before procurement proceeds.
Packing format, carton notes, invoice details, courier option, destination, and tracking handoff are coordinated around the confirmed order.
The request connects the previously used model, current demand, package evidence, target timing, and replenishment sourcing route.
Related products
Packaged components ready for RFQ.
1 Piece Integrated Circuit for IRS20124S IRS21956S SOP-20 IRS2453DS SOP-14
- Model
- IRS20124S
- Package
