Model & package intelligence
Model text, package form, tray or reel details, and visual evidence are reviewed together before RFQ feedback.
HF HFD23-024-1ZS HFD23
Configuration
1 options
Configuration
26+
Available for RFQ
Technical data
Product details
19
specifications
Core information
- Product name
- HF HFD23-024-1ZS
- Type
- HF
- Minimum package
- 20 管装
Technical parameters
- Electronic Component
- Electronic Component
- Electronic Component
- HF
- Electronic Component
- HFD23-024-1ZS
- Electronic Component
- 1
- Package
- DIP,12.5x7.5mm
- Electronic Component
- Signal Relay
- Electronic Component
- 2g
- Electronic Component
- 6
- Electronic Component
- 1
- Electronic Component
- 5ms
- Electronic Component
- BM0232058939
- Operating Temperature
- 40℃~+70℃
- Contact Resistor
- 100mΩ
- Coil Voltage
- 24V
- Coil Resistor
- 3.84kΩ
- Coil Type
- Coil
For datasheets, package documents, compatible-part guidance, or other technical resources, contact WMSIC customer service. Availability is confirmed case by case.
HFD23-024-1ZS 产品概述
HFD23-024-1ZS 是 HF（宏发）出品的一款小型低功耗 DIP 继电器，采用 1C（单刀双掷，SPDT）触点配置，适合在体积受限且需可靠隔离切换的电子设备中使用。封装为标准 DIP，外形尺寸约 12.5 × 7.5 mm，便于 PCB 穿孔安装与自动化贴装流程。
一、主要参数
- 线圈电压：24 V DC
- 线圈电阻：3.84 kΩ（线圈电流约 6.25 mA）
- 额定线圈功率：150 mW（低功耗设计）
- 触点形式：1C（SPDT），引脚数：6
- 触点容量（电阻负载）：500 mA @ 125 VAC；1 A @ 30 VDC
- 最大切换电压：125 V AC；60 V DC
- 最大切换电流：2 A（请按负载类型与寿命需求参考）
- 触点材料：AgNi + 镀金（适合低电平信号与提高耐蚀性）
- 接触电阻：≤100 mΩ
- 动作/释放时间：约 5 ms / 5 ms
- 线圈类型：无极性（单线圈，任意极性驱动）
- 工作温度范围：-40 ℃ ~ +70 ℃
二、结构与封装
- 标准 DIP 穿孔封装，尺寸 12.5 × 7.5 mm，6 引脚布局，便于 PCB 布局与机械固定。
- 触点采用 AgNi 材料并做局部镀金处理，提高低电流开关可靠性和接触稳定性。
三、性能特点
- 低功耗：24 V 线圈仅消耗约 150 mW，适合电源受限系统。
- 无极性线圈：接线方便，可在不区分极性的场合直接驱动。
- 快速响应：动作/释放时间均约 5 ms，满足一般控制与信号切换需求。
- 适合信号与功率混合应用：触点对低电平信号友好（镀金），同时对较小功率 AC/DC 负载也有良好表现。
四、典型应用场景
- 通信设备、继电保护模块与交换电路
- 仪器仪表、测量与测试设备的信号切换
- 家用电器与工业控制中体积受限的电源或信号切换
- 需要低功耗、长寿命驻留的电子开关场合
五、使用与注意事项
- 触点额定容量按电阻性负载给出，切换感性或电感性负载（电机、继电线圈等）时需适当降额并加抑制元件以延长触点寿命。
- 因线圈为无极性结构，如需采用二极管吸收回路，应注意二极管会使线圈变为有极性，若电路可能出现反向驱动，请优先采用 RC 抑制器或双向抑制器（如 TVS、RC 网络）。
- 工作环境温度、频繁切换和负载类型都会影响使用寿命，设计时预留安全裕度。
- 在焊接与波峰作业时参考制造商推荐的温度与时间曲线，避免封装与内部结构受损。
HFD23-024-1ZS 以其小巧尺寸、低线圈功耗与适用多种信号/电源场景的特性，是常见于通信、控制与仪器领域的实用型 DIP 继电器选择。
Request for quote
Send RFQ
Use the form for single models, category sourcing, and multi-line BOM requirements.
Product sourcing intelligence
Model, package, availability, and BOM fit reviewed before quotation.
WMSIC turns product data, package visuals, BOM context, and sourcing signals into practical RFQ notes for buyers.
BOM matching & alternatives
BOM lines are compared by package, parameters, quantity, and workable alternatives for cleaner sourcing decisions.
Sourcing availability signal
Stock routes, quotation confidence, lead-time notes, and shipment feasibility are checked before sales follow-up.
Buyer sourcing scenarios
Examples of how common component sourcing requests are organized.
Typical RFQ scenarios based on the WMSIC form fields, catalog data, manual review steps, and shipment preparation workflow.
The buyer shares the full part number, package requirement, quantity, destination, and available product photos so the quotation can record the exact version under review.
A multi-line BOM is organized into direct sourcing lines, lines that need package clarification, and lines where alternative-part review is permitted.
The original manufacturer part number, datasheet revision, application, critical limits, and acceptable changes are collected before possible candidates are discussed.
Sample quantity, minimum packing, package format, target date, and courier destination are kept together in one RFQ conversation.
Package photos, model markings, board context, and the quantity needed for repair help focus the sourcing review on the relevant version.
When a suffix or package note is incomplete, the response records the open difference and requests buyer confirmation before procurement proceeds.
Packing format, carton notes, invoice details, courier option, destination, and tracking handoff are coordinated around the confirmed order.
The request connects the previously used model, current demand, package evidence, target timing, and replenishment sourcing route.
Related products
Packaged components ready for RFQ.
1 Piece Integrated Circuit for IRS20124S IRS21956S SOP-20 IRS2453DS SOP-14
- Model
- IRS20124S
- Package
