Model & package intelligence
Model text, package form, tray or reel details, and visual evidence are reviewed together before RFQ feedback.
HANRUN HR961160C
Configuration
1 options
Configuration
26+
Available for RFQ
Technical data
Product details
19
specifications
Core information
- Product name
- HANRUN HR961160C
- Type
- HANRUN
- Minimum package
- 100 圆盘
Technical parameters
- LED
- LED
- PoE
- Po E
- Electronic Component
- Electronic Component
- Electronic Component
- HANRUN
- Electronic Component
- HR961160C
- Electronic Component
- 1
- Package
- Through-hole
- Display
- Display
- Electronic Component
- Ethernet Connector(RJ45 RJ11)
- Electronic Component
- 8.54g
- Electronic Component
- 1
- Electronic Component
- BM0264213492
- Electronic Component
- Electronic Component
- Electronic Component
- 1
- Electronic Component
- positions
- Connector Type
- RJ45Socket
For datasheets, package documents, compatible-part guidance, or other technical resources, contact WMSIC customer service. Availability is confirmed case by case.
HR961160C 以太网RJ45连接器产品概述
HR961160C是汉仁电子（HANRUN）推出的单端口带LED以太网RJ45插座，针对需要可视化链路状态的小型化设备设计，兼顾传输可靠性与生产效率，广泛适配消费电子、智能家居等多场景应用。
一、产品核心定位与应用场景
该产品定位于入门级以太网连接器件，核心功能是实现设备与以太网的物理连接，同时通过内置LED直观反馈网络状态。其典型应用覆盖：
- 家用场景：路由器、交换机、机顶盒的网络接口
- 智能家居：智能网关、安防监控主机的有线连接
- 工业轻应用：小型PLC、远程IO模块的通信接口
- 通信终端：4G CPE、无线AP的有线扩展接口
因体积紧凑、成本可控，尤其适合对空间和成本有严格要求的小型设备设计。
二、基础参数与规格
HR961160C的核心参数符合RJ45标准，关键规格如下：
类别 详情 连接器类型 RJ45插座（兼容RJ11插头） 端口数量 1个（单端口设计） LED配置 内置双LED（链路状态+数据活动） 封装形式 SMD表面贴装+插件固定（兼顾效率与强度） 传输标准 满足10/100BASE-T以太网传输要求 接触件材质 高弹性磷青铜（表面镀金，抗氧化） 插拔寿命 ≥1000次（符合工业级基本要求） 工作温度范围 商业级：0℃~70℃（常规室内环境适用）注：以上参数为基于汉仁电子同类产品的常规规格，具体以官方 datasheet 为准。
三、关键性能与优势
3.1 可视化状态指示
内置双LED灯（通常为绿色=链路连接、橙色=数据活动），无需借助工具即可快速判断网络状态：
- 绿色常亮：物理链路已建立
- 橙色闪烁：正在传输数据
- 无灯：链路断开或无电源
3.2 可靠传输设计
接触件采用磷青铜材质，表面镀金处理，有效降低接触电阻，避免信号衰减；接口结构符合RJ45标准，确保与RJ45插头的稳定插拔与信号传输。
3.3 灵活封装适配
SMD表面贴装设计适合自动化贴片生产，提升批量生产效率；同时保留少量插件固定脚，增强与PCB板的机械连接强度，避免因振动导致的虚焊或脱落。
3.4 紧凑体积布局
单端口设计，尺寸小巧（常规RJ45单口尺寸约15mm×10mm），可轻松适配小型设备内部空间，满足智能家居、消费电子等对尺寸敏感的场景需求。
四、选型与使用注意事项
- 传输速率匹配：若设备需支持千兆以太网，需确认该型号是否兼容千兆（HR961160C常规为百兆，如需千兆需选汉仁其他型号）；
- PCB设计要求：需按照官方封装图设计焊盘与过孔，SMD焊盘需预留回流焊空间，插件脚需对应过孔尺寸；
- 焊接工艺：建议采用回流焊（温度曲线符合汉仁规格），避免手工焊接高温损坏LED；
- 环境防护：常规无IP防护等级，不建议直接暴露在潮湿、粉尘环境中，需配合设备外壳防护；
- 插拔规范：避免频繁插拔（≤1000次为设计寿命），插拔时保持垂直方向，避免接触件变形。
五、总结
HR961160C作为汉仁电子的经典RJ45带LED插座，以高性价比、稳定可靠、体积紧凑为核心优势，覆盖了大部分入门级以太网设备的连接需求。其可视化状态指示降低了设备调试难度，灵活的封装设计适配自动化生产，是消费电子、智能家居等领域的优选连接器件之一。
Request for quote
Send RFQ
Use the form for single models, category sourcing, and multi-line BOM requirements.
Product sourcing intelligence
Model, package, availability, and BOM fit reviewed before quotation.
WMSIC turns product data, package visuals, BOM context, and sourcing signals into practical RFQ notes for buyers.
BOM matching & alternatives
BOM lines are compared by package, parameters, quantity, and workable alternatives for cleaner sourcing decisions.
Sourcing availability signal
Stock routes, quotation confidence, lead-time notes, and shipment feasibility are checked before sales follow-up.
Buyer sourcing scenarios
Examples of how common component sourcing requests are organized.
Typical RFQ scenarios based on the WMSIC form fields, catalog data, manual review steps, and shipment preparation workflow.
The buyer shares the full part number, package requirement, quantity, destination, and available product photos so the quotation can record the exact version under review.
A multi-line BOM is organized into direct sourcing lines, lines that need package clarification, and lines where alternative-part review is permitted.
The original manufacturer part number, datasheet revision, application, critical limits, and acceptable changes are collected before possible candidates are discussed.
Sample quantity, minimum packing, package format, target date, and courier destination are kept together in one RFQ conversation.
Package photos, model markings, board context, and the quantity needed for repair help focus the sourcing review on the relevant version.
When a suffix or package note is incomplete, the response records the open difference and requests buyer confirmation before procurement proceeds.
Packing format, carton notes, invoice details, courier option, destination, and tracking handoff are coordinated around the confirmed order.
The request connects the previously used model, current demand, package evidence, target timing, and replenishment sourcing route.
Related products
Packaged components ready for RFQ.
