Model & package intelligence
Model text, package form, tray or reel details, and visual evidence are reviewed together before RFQ feedback.
JST B7B-PH-K-S(LF)(SN)
Configuration
1 options
Configuration
22+
Available for RFQ
Technical data
Product details
19
specifications
Core information
- Product name
- JST B7B-PH-K-S(LF)(SN)
- Type
- JST
- Minimum package
- 500
Technical parameters
- Electronic Component
- JST
- Electronic Component
- B7B-PH-K-S(LF)(SN)
- Electronic Component
- 1
- Package
- Through-hole, P=2mm
- Electronic Component
- 1
- Electronic Component
- Wire-to-Board
- Electronic Component
- 0.432g
- Electronic Component
- 2mm
- Electronic Component
- Electronic Component
- PIN
- 7P
- Electronic Component
- 1
- Electronic Component
- PH
- Electronic Component
- BM69416386
- Electronic Component
- PA66
- Electronic Component
- Through-hole
- Operating Temperature
- 25℃~+85℃
For datasheets, package documents, compatible-part guidance, or other technical resources, contact WMSIC customer service. Availability is confirmed case by case.
产品概述：B7B-PH-K-S(LF)(SN) 线对板针座
一、产品简介
B7B-PH-K-S(LF)(SN) 是日本连接器制造商 JST 旗下的一款高性能线对板针座，采用通孔安装设计，针距为2.00mm（即0.079英寸），适用于多种电路连接场合。它可以实现电缆到电路板的高效连接，广泛应用于通讯、电力、家电、工业设备及消费电子中。此产品的设计不仅注重性能和可靠性，还兼顾了工业标准和环保要求，为用户提供稳定的连接解决方案。
二、产品特点
连接器类型与设计：
- B7B-PH-K-S(LF)(SN) 作为接头型连接器，采用公形引脚结构，具有优良的插拔性能与重复使用能力。
- 1x7P 的针位数，意味着该连接器具有七个连接针，为各种电气应用提供灵活的连接选项。
材料与表面处理：
- 触头材料选用优质的黄铜，确保电气连接的导电性和耐腐蚀性。
- 所有接触端均经过锡处理，减少氧化对电流传输的影响，并提高连接的耐用性。
绝缘性能：
- 采用聚酰胺（PA66）和尼龙 6/6 作为绝缘材料，这些材料均符合 UL94 V-0 的可燃性等级标准，确保在高温和苛刻环境下的安全性。
- 绝缘高度为0.236英寸（6.00毫米），有效防止短路和接触失效。
电气参数：
- 额定电流为2A，额定电压可达100V，满足一般电务的需求，并确保在正常工作条件下的安全与稳定。
- 工作温度范围为 -25°C 至 85°C，适应多种环境条件，确保良好的工作性能。
安装方式：
- 采用通孔安装方式，便于用户快捷安装，使其可以广泛应用于PCB设计中。
应用领域：
- B7B-PH-K-S(LF)(SN) 在许多应用场景中展现出卓越性能，常见于汽车电子、消费类电子、智能设备、工控领域等。无论是连接传感器、显示模块还是电源线，这款连接器都能提供可靠的解决方案。
三、使用说明
在使用 B7B-PH-K-S(LF)(SN) 连接器时，建议遵循以下步骤：
- 确认连接需求：在进行电路设计前，确保所需要的针位数和电气参数符合设计要求。
- 板材准备：确保PCB的通孔设计与B7B-PH-K-S(LF)(SN)的针位相匹配，并检查PCB材料及厚度是否适合安装此类连接器。
- 安装操作：在进行通孔焊接时，需采用适合的焊接材料（如焊锡），并确保连接器已正确定位，避免对PCB造成机械损伤。
- 最终测试：完成焊接后，进行通断测试，确保每个连接都能良好通讯，并确认接触良好，避免隐性故障。
四、结语
B7B-PH-K-S(LF)(SN) 是一款符合现代电气连接需求的优质线对板针座，凭借其高强度的材料、优异的电气性能以及良好的环境适应能力，已成为众多行业用户的优先选择。无论是在新产品设计还是已有产品的维护与升级中，选择 B7B-PH-K-S(LF)(SN) 都是保障连接安全、提升性能的理想决策。
Request for quote
Send RFQ
Use the form for single models, category sourcing, and multi-line BOM requirements.
Product sourcing intelligence
Model, package, availability, and BOM fit reviewed before quotation.
WMSIC turns product data, package visuals, BOM context, and sourcing signals into practical RFQ notes for buyers.
BOM matching & alternatives
BOM lines are compared by package, parameters, quantity, and workable alternatives for cleaner sourcing decisions.
Sourcing availability signal
Stock routes, quotation confidence, lead-time notes, and shipment feasibility are checked before sales follow-up.
Buyer sourcing scenarios
Examples of how common component sourcing requests are organized.
Typical RFQ scenarios based on the WMSIC form fields, catalog data, manual review steps, and shipment preparation workflow.
The buyer shares the full part number, package requirement, quantity, destination, and available product photos so the quotation can record the exact version under review.
A multi-line BOM is organized into direct sourcing lines, lines that need package clarification, and lines where alternative-part review is permitted.
The original manufacturer part number, datasheet revision, application, critical limits, and acceptable changes are collected before possible candidates are discussed.
Sample quantity, minimum packing, package format, target date, and courier destination are kept together in one RFQ conversation.
Package photos, model markings, board context, and the quantity needed for repair help focus the sourcing review on the relevant version.
When a suffix or package note is incomplete, the response records the open difference and requests buyer confirmation before procurement proceeds.
Packing format, carton notes, invoice details, courier option, destination, and tracking handoff are coordinated around the confirmed order.
The request connects the previously used model, current demand, package evidence, target timing, and replenishment sourcing route.
Related products
Packaged components ready for RFQ.
