Model & package intelligence
Model text, package form, tray or reel details, and visual evidence are reviewed together before RFQ feedback.
Kingbright APG1608ZGC
Configuration
1 options
Configuration
26+
Available for RFQ
Technical data
Product details
20
specifications
Core information
- Product name
- Kingbright APG1608ZGC
- Type
- KINGBRIGHT
- Unit
- Electronic Component
- Minimum package
- 4000 圆盘
Technical parameters
- Power
- 102.5mW
- Electronic Component
- Electronic Component
- Electronic Component
- Electronic Component
- Electronic Component
- KINGBRIGHT
- Electronic Component
- APG1608ZGC
- Electronic Component
- 1
- Package
- 0603
- Electronic Component
- 525nm
- Electronic Component
- LEDDiode / LED
- Electronic Component
- 0.172g
- Electronic Component
- 1
- LED
- 400mcd
- LED
- 130°
- LED
- Electronic Component
- Electronic Component
- BM0265152328
- Electronic Component
- 515nm
For datasheets, package documents, compatible-part guidance, or other technical resources, contact WMSIC customer service. Availability is confirmed case by case.
APG1608ZGC 产品概述
一、产品简介
APG1608ZGC 为 Kingbright 推出的高亮翠绿色（翠绿色）0603（1608公制）贴片 LED，透明无色透镜设计，芯片封装紧凑，适合空间受限的消费电子与指示类应用。器件以稳定的光学输出与宽视角为特点，便于在多角度可见场合使用。
二、主要参数
- 发光颜色：翠绿色
- 峰值波长：515 nm；典型波长（主波长）：525 nm
- 正向电压（Vf）：3.3 V（典型）
- 额定正向电流：20 mA
- 标称功率：102.5 mW（规格表值）
- 在 If=20 mA 时发光强度：400 mcd（典型）
- 发光角度：130°
- 透镜：无色透明
- 工作温度：-40 ℃ 至 +85 ℃
- 封装：0603（1608 公制），SMD
注：在 If=20 mA 且 Vf≈3.3 V 时，器件电功率约为 66 mW，低于规格列出的最大功率；实际使用时建议遵循厂商的最大功率及温升限制。
三、光学与电气特性
APG1608ZGC 在 130° 的宽阔视角内保持均匀亮度，适合作为面光或指示光源。400 mcd 的典型亮度使其在弱至中等背景光环境中清晰可见。Vf≈3.3 V 表明在驱动设计上需考虑较高的正向压降，常见做法是采用恒流源或串联限流电阻以稳定电流。例如在 5 V 电源下，限流电阻可按 R = (Vs - Vf) / If 计算：R ≈ (5 - 3.3) / 0.02 ≈ 85 Ω（取接近标准值 82 Ω 或 91 Ω 并考虑功率余量）。
四、封装与布局建议
- 尺寸 0603，适配常见的 0603 PCB land pattern；为了获得最佳热散与光学表现，建议参考 Kingbright 推荐的焊盘设计和黄铜围焊尺寸。
- 兼容标准 SMD 回流焊工艺；在回流温度曲线和焊接峰值温度上应遵循厂商建议以避免芯片损伤。
- PCB 布局时应考虑散热路径和避免在LED背面堆叠热源，以减小光输出随温度下降的影响。
五、典型应用
- 面板与状态指示灯（工业设备、家电、仪表）
- 可穿戴设备与便携终端的标示灯
- 物联网节点、无线模块、路由器等指示应用
- 紧凑型指示牌与图形显示点阵
六、可靠性与使用注意
- 工作温度范围宽（-40 ~ +85 ℃），适合多数工业与商业环境。
- 在存储与装配过程中注意静电防护（ESD）；建议采用常见的静电控制措施。
- 长期高温或过流驱动会加速光衰，建议设计余量并做热仿真验证。
- 若需更严格的光衰或色漂控制，可在样品阶段做寿命加速试验以确认长期性能。
七、选型与订购
订购型号：APG1608ZGC（Kingbright）。常见包装为卷带盘带（Tape & Reel），便于贴片机直接贴装。采购时请确认批次、光通量分档（Bins）与是否有 RoHS/无卤合规要求，以保证批次间的一致性。若用于量产，建议向供应商索取完整数据手册和推荐回流工艺曲线。
Request for quote
Send RFQ
Use the form for single models, category sourcing, and multi-line BOM requirements.
Product sourcing intelligence
Model, package, availability, and BOM fit reviewed before quotation.
WMSIC turns product data, package visuals, BOM context, and sourcing signals into practical RFQ notes for buyers.
BOM matching & alternatives
BOM lines are compared by package, parameters, quantity, and workable alternatives for cleaner sourcing decisions.
Sourcing availability signal
Stock routes, quotation confidence, lead-time notes, and shipment feasibility are checked before sales follow-up.
Buyer sourcing scenarios
Examples of how common component sourcing requests are organized.
Typical RFQ scenarios based on the WMSIC form fields, catalog data, manual review steps, and shipment preparation workflow.
The buyer shares the full part number, package requirement, quantity, destination, and available product photos so the quotation can record the exact version under review.
A multi-line BOM is organized into direct sourcing lines, lines that need package clarification, and lines where alternative-part review is permitted.
The original manufacturer part number, datasheet revision, application, critical limits, and acceptable changes are collected before possible candidates are discussed.
Sample quantity, minimum packing, package format, target date, and courier destination are kept together in one RFQ conversation.
Package photos, model markings, board context, and the quantity needed for repair help focus the sourcing review on the relevant version.
When a suffix or package note is incomplete, the response records the open difference and requests buyer confirmation before procurement proceeds.
Packing format, carton notes, invoice details, courier option, destination, and tracking handoff are coordinated around the confirmed order.
The request connects the previously used model, current demand, package evidence, target timing, and replenishment sourcing route.
Related products
Packaged components ready for RFQ.
1 Piece Integrated Circuit for IRS20124S IRS21956S SOP-20 IRS2453DS SOP-14
- Model
- IRS20124S
- Package
