Model & package intelligence
Model text, package form, tray or reel details, and visual evidence are reviewed together before RFQ feedback.
Kingbright APT1608YC
Configuration
1 options
Configuration
26+
Available for RFQ
Technical data
Product details
20
specifications
Core information
- Product name
- Kingbright APT1608YC
- Type
- KINGBRIGHT
- Unit
- Electronic Component
- Minimum package
- 2000 圆盘
Technical parameters
- Power
- 75mW
- Electronic Component
- Electronic Component
- Electronic Component
- Electronic Component
- Electronic Component
- KINGBRIGHT
- Electronic Component
- APT1608YC
- Electronic Component
- 1
- Package
- 0603
- Electronic Component
- 588nm
- Electronic Component
- LEDDiode / LED
- Electronic Component
- 0.036g
- Electronic Component
- 1
- LED
- 8mcd
- LED
- 150°
- LED
- Electronic Component
- Electronic Component
- BM0230664294
- Electronic Component
- 590nm
For datasheets, package documents, compatible-part guidance, or other technical resources, contact WMSIC customer service. Availability is confirmed case by case.
APT1608YC 产品概述
一、产品简介
APT1608YC 是 Kingbright 生产的一款 0603（1608 公制）表面贴装黄色 CHIP LED。发光颜色为黄色（典型波长 588nm，峰值 590nm），透镜为无色透明结构，出光均匀，适合面板指示与空间受限的照明应用。封装小巧、光学性能稳定，是各类消费电子、指示灯和背光设计的常用元件。
二、主要电气与光学参数
- 发光颜色：黄色
- 正向电压 (Vf)：典型 2.1V（在 20mA）
- 额定正向电流：20mA（建议最大工作电流以数据手册为准）
- 功率：75mW（封装最大功耗）
- 发光强度：典型 8 mcd（测量条件通常为 If=20mA，具体以数据手册测试条件为准）
- 波长：588nm（典型），峰值 590nm
- 发光角度：150°
- 工作温度范围：-40℃ ～ +85℃
注：在设计中应参考具体数据手册中给出的曲线（光强-电流、Vf-温度等）进行匹配与余量设计。
三、封装与机械信息
- 封装型号：0603（1608 公制），典型尺寸约 1.6mm × 0.8mm，厚度低，高度适合高密度贴片板设计。
- 透镜：无色透明，利于广角出光（150°）。
- 引脚与极性：传统 CHIP LED 两端为阳极/阴极，PCB 设计请参考厂方建议的焊盘位号与极性标识。
四、典型应用场景
- 面板指示灯与状态指示（电源、充电、工况显示）
- 便携设备与消费电子（手持设备、遥控器、玩具）
- 按键背光与图标指示
- 低功耗指示与信号提示场合
五、设计与安装建议
- 驱动方式：建议串联限流电阻或恒流源驱动。示例：采用 5V 电源时，限流电阻 R ≈ (5.0−2.1)V / 20mA ≈ 145Ω（可选标准值 150Ω），电阻功率约 60mW，建议使用 1/4W 及以上功率电阻。
- 热管理：单颗 LED 在 20mA 时耗散约 42mW（2.1V×20mA），远低于封装最大 75mW，但在高密度布板或高温环境下需注意散热与降额。
- 寿命与可靠性：避免持续过流、超温工作；在高温、高湿环境使用时建议做必要的防护与封装。
- 焊接：兼容无铅回流焊流程，建议按厂方回流曲线进行，避免过高峰值温度或超时焊接。
- 防静电与搬运：为半导体器件，请采取静电防护措施，避免机械硬压导致晶粒与焊点损伤。
六、选型与采购提示
型号：APT1608YC（Kingbright），封装 0603，黄色透明透镜。选型时请确认所需的光强、工作电流与温度范围，必要时向供应商索取完整数据手册与光、电性能曲线以便仿真与可靠性评估。
如需更详细的电光参数曲线、推荐 PCB 焊盘尺寸或回流曲线，可提供具体需求，我可协助整理并给出参考设计值。
Request for quote
Send RFQ
Use the form for single models, category sourcing, and multi-line BOM requirements.
Product sourcing intelligence
Model, package, availability, and BOM fit reviewed before quotation.
WMSIC turns product data, package visuals, BOM context, and sourcing signals into practical RFQ notes for buyers.
BOM matching & alternatives
BOM lines are compared by package, parameters, quantity, and workable alternatives for cleaner sourcing decisions.
Sourcing availability signal
Stock routes, quotation confidence, lead-time notes, and shipment feasibility are checked before sales follow-up.
Buyer sourcing scenarios
Examples of how common component sourcing requests are organized.
Typical RFQ scenarios based on the WMSIC form fields, catalog data, manual review steps, and shipment preparation workflow.
The buyer shares the full part number, package requirement, quantity, destination, and available product photos so the quotation can record the exact version under review.
A multi-line BOM is organized into direct sourcing lines, lines that need package clarification, and lines where alternative-part review is permitted.
The original manufacturer part number, datasheet revision, application, critical limits, and acceptable changes are collected before possible candidates are discussed.
Sample quantity, minimum packing, package format, target date, and courier destination are kept together in one RFQ conversation.
Package photos, model markings, board context, and the quantity needed for repair help focus the sourcing review on the relevant version.
When a suffix or package note is incomplete, the response records the open difference and requests buyer confirmation before procurement proceeds.
Packing format, carton notes, invoice details, courier option, destination, and tracking handoff are coordinated around the confirmed order.
The request connects the previously used model, current demand, package evidence, target timing, and replenishment sourcing route.
Related products
Packaged components ready for RFQ.
1 Piece Integrated Circuit for IRS20124S IRS21956S SOP-20 IRS2453DS SOP-14
- Model
- IRS20124S
- Package
