Model & package intelligence
Model text, package form, tray or reel details, and visual evidence are reviewed together before RFQ feedback.
Kingbright KPT-1608EC
Configuration
1 options
Configuration
26+
Available for RFQ
Technical data
Product details
19
specifications
Core information
- Product name
- Kingbright KPT-1608EC
- Type
- KINGBRIGHT
- Minimum package
- 2000 个
Technical parameters
- Power
- 75mW
- Electronic Component
- Electronic Component
- Electronic Component
- KINGBRIGHT
- Electronic Component
- KPT-1608EC
- Electronic Component
- 1
- Package
- 0603
- Electronic Component
- 617nm
- Electronic Component
- LEDDiode / LED
- Electronic Component
- 0.036g
- Electronic Component
- 1
- LED
- 15mcd
- LED
- 150°
- LED
- Electronic Component
- Electronic Component
- BM0229963352
- Electronic Component
- 627nm
- Operating Temperature
- 40℃~+85℃
For datasheets, package documents, compatible-part guidance, or other technical resources, contact WMSIC customer service. Availability is confirmed case by case.
KPT-1608EC 产品概述
一、产品简介
KPT-1608EC 为 Kingbright 公司 0603 贴片红光芯片 LED，透明透镜，发光颜色为红色。该器件体积极小、发光均匀，适用于高密度 SMT 板上做状态指示、背光和一般指示照明。器件适配自动化贴装与回流焊工艺，适合消费电子、仪表、工业控制及物联网终端等应用场景。
二、主要技术参数
- 发光颜色：红色
- 正向电压 (Vf)：典型 2.5 V
- 正向电流 (If)：额定 20 mA
- 最大功率：75 mW（注：为器件额定功耗参考，实际电耗 Vf×If ≈ 50 mW）
- 波长（主导/峰值）：主导 617 nm，峰值 627 nm
- 发光强度：约 15 mcd（通常在 If=20 mA 条件下测得）
- 发光角度：150°（宽视角，便于可视性）
- 透镜颜色：无色透明
- 工作温度范围：-40 ℃ ~ +85 ℃
- 封装：0603（1608 英制尺寸）
三、光电特性说明
KPT-1608EC 在 20 mA 驱动下呈现典型的 15 mcd 光强，150° 的大视角使其在正面及斜角方向均有良好可见性，适合做面板指示或状态提示。主导波长和峰值波长表明其为典型的红色发射，色彩饱和、辨识度高。
四、驱动与设计建议
- 电阻计算示例：R = (Vsup - Vf) / If。
例如 5 V 电源：R ≈ (5.0 - 2.5) / 0.02 = 125 Ω（可选 120–150 Ω）；
例如 3.3 V 电源：R ≈ (3.3 - 2.5) / 0.02 = 40 Ω（可选 39–47 Ω）。 - 建议在设计中使用限流电阻或恒流驱动，避免超额驱动导致寿命下降。
- 器件在高环境温度下发光效率与寿命会下降，应参考厂商光-温特性曲线并在必要时降额使用。
五、封装与装配注意
- 采用 0603 小尺寸封装，适合 SMT 自动贴装与回流焊。为确保焊接可靠性，请遵循 Kingbright 推荐的回流曲线与焊接参数。
- 推荐使用厂商提供的 PCB 焊盘尺寸和贴装指导，以确保焊点成形和热传导。
- 储运与装配时应注意静电防护和湿敏等级要求（参考原厂包装说明）。
六、可靠性与使用注意
- 工作温度范围宽，可用于多数室温与低温环境；若长期在高温环境使用，应适当降低驱动电流以延长寿命。
- 建议在设计验证阶段完成老化、热循环与环境测试，确保在目标应用的可靠性。
- 如需用于对可靠性有更高要求的场合（如汽车级应用），请向供应商确认器件认证与额定。
七、典型应用
- 面板/指示灯、按键背光、便携设备状态指示、家电与仪表、物联网终端、指示标识等。
如需更详细的焊接曲线、光电特性曲线、PCB 推荐尺寸或可靠性数据，请参考 Kingbright 官方数据手册或向供应商索取器件完整技术资料。
Request for quote
Send RFQ
Use the form for single models, category sourcing, and multi-line BOM requirements.
Product sourcing intelligence
Model, package, availability, and BOM fit reviewed before quotation.
WMSIC turns product data, package visuals, BOM context, and sourcing signals into practical RFQ notes for buyers.
BOM matching & alternatives
BOM lines are compared by package, parameters, quantity, and workable alternatives for cleaner sourcing decisions.
Sourcing availability signal
Stock routes, quotation confidence, lead-time notes, and shipment feasibility are checked before sales follow-up.
Buyer sourcing scenarios
Examples of how common component sourcing requests are organized.
Typical RFQ scenarios based on the WMSIC form fields, catalog data, manual review steps, and shipment preparation workflow.
The buyer shares the full part number, package requirement, quantity, destination, and available product photos so the quotation can record the exact version under review.
A multi-line BOM is organized into direct sourcing lines, lines that need package clarification, and lines where alternative-part review is permitted.
The original manufacturer part number, datasheet revision, application, critical limits, and acceptable changes are collected before possible candidates are discussed.
Sample quantity, minimum packing, package format, target date, and courier destination are kept together in one RFQ conversation.
Package photos, model markings, board context, and the quantity needed for repair help focus the sourcing review on the relevant version.
When a suffix or package note is incomplete, the response records the open difference and requests buyer confirmation before procurement proceeds.
Packing format, carton notes, invoice details, courier option, destination, and tracking handoff are coordinated around the confirmed order.
The request connects the previously used model, current demand, package evidence, target timing, and replenishment sourcing route.
Related products
Packaged components ready for RFQ.
