Model & package intelligence
Model text, package form, tray or reel details, and visual evidence are reviewed together before RFQ feedback.
Kingbright APHHS1005LQBC/D-V
Configuration
1 options
Configuration
25+
Available for RFQ
Technical data
Product details
20
specifications
Core information
- Product name
- Kingbright APHHS1005LQBC/D-V
- Type
- KINGBRIGHT
- Unit
- Electronic Component
- Minimum package
- 2000 圆盘
Technical parameters
- Power
- 120mW
- Electronic Component
- Electronic Component
- Electronic Component
- Electronic Component
- Electronic Component
- KINGBRIGHT
- Electronic Component
- APHHS1005LQBC/D-V
- Electronic Component
- 1
- Package
- 0402
- Electronic Component
- 465nm
- Electronic Component
- LEDDiode / LED
- Electronic Component
- 0.164g
- Electronic Component
- 1
- LED
- 15mcd
- LED
- 140°
- LED
- Electronic Component
- Electronic Component
- BM0257629656
- Electronic Component
- 460nm
For datasheets, package documents, compatible-part guidance, or other technical resources, contact WMSIC customer service. Availability is confirmed case by case.
APHHS1005LQBC/D-V 产品概述
一、产品概述
Kingbright APHHS1005LQBC/D-V 是一颗高性价比蓝光表贴 LED，封装为 0402（1005 公制）小尺寸 SMD，透明无色透镜，发光颜色为蓝色。该器件以小体积、宽视角与稳定的电气特性，适合空间受限的指示和小型背光场合。
二、主要参数
- 发光颜色：蓝色
- 峰值波长：460 nm；典型波长（dominant）：465 nm
- 正向电压（Vf）：2.65 V（在额定工作电流下）
- 额定正向电流：2 mA
- 功率额定：120 mW（器件最大耗散能力）
- 发光强度：15 mcd（典型值）
- 发光角度：140°（宽视角）
- 透镜颜色：无色透明
- 工作温度范围：-40°C ~ +85°C
三、电气与热性能
在典型工作点 2 mA、Vf ≈ 2.65 V 时，器件自身功耗约为 5.3 mW，远低于其 120 mW 的功耗允许值，热裕度充足。如下为常见限流电阻计算示例：
- 以 5 V 电源驱动：R = (5.0 − 2.65) / 2 mA ≈ 1.18 kΩ → 选 1.2 kΩ
- 以 3.3 V 电源驱动：R = (3.3 − 2.65) / 2 mA ≈ 325 Ω → 选 330 Ω
实际设计应考虑器件间差异和环境温度，对应调整电流以保证光色和寿命。
四、封装与机械特性
0402（1005）超小封装便于高密度贴片组装，占板面积小，适用于便携设备与微型显示指示。透明透镜配合 140° 宽视角，提供均匀可视效果。该器件支持常规 SMD 回流焊工艺，推荐遵循厂商焊接曲线和 PCB 焊盘设计规范以保证良好焊点和可靠性。
五、典型应用
- 消费电子指示灯（耳机、手环、遥控器）
- 仪表面板与功能状态指示
- 小型背光与符号照明
- 医疗和工业便携设备中的状态指示
其小尺寸和宽视角使其在空间受限且需要广角可视的场合尤为合适。
六、使用与焊接建议
- 实施 ESD 防护措施，LED 对静电敏感；在生产与装配过程中佩戴防静电设备。
- 按 Kingbright 或行业标准的回流焊温度曲线进行焊接，避免过高温度或超时停留。
- 储存与回流前遵循干燥保存建议，必要时进行烘烤以消除吸湿带来的焊接问题。
- 设计时应留有合理的限流电阻，避免长期过流以延长寿命并保持光色稳定。
七、选型与注意事项
选型时确认所需亮度、视角与光色一致；如需更高亮度或不同色温，可参考 Kingbright 系列其它封装与电流等级产品。文中参数为典型值或厂商标称值，批次间存在偏差，量产前建议获取样品进行实际测量验证，并参考官方数据表获得详细规格与可靠性指标。
Request for quote
Send RFQ
Use the form for single models, category sourcing, and multi-line BOM requirements.
Product sourcing intelligence
Model, package, availability, and BOM fit reviewed before quotation.
WMSIC turns product data, package visuals, BOM context, and sourcing signals into practical RFQ notes for buyers.
BOM matching & alternatives
BOM lines are compared by package, parameters, quantity, and workable alternatives for cleaner sourcing decisions.
Sourcing availability signal
Stock routes, quotation confidence, lead-time notes, and shipment feasibility are checked before sales follow-up.
Buyer sourcing scenarios
Examples of how common component sourcing requests are organized.
Typical RFQ scenarios based on the WMSIC form fields, catalog data, manual review steps, and shipment preparation workflow.
The buyer shares the full part number, package requirement, quantity, destination, and available product photos so the quotation can record the exact version under review.
A multi-line BOM is organized into direct sourcing lines, lines that need package clarification, and lines where alternative-part review is permitted.
The original manufacturer part number, datasheet revision, application, critical limits, and acceptable changes are collected before possible candidates are discussed.
Sample quantity, minimum packing, package format, target date, and courier destination are kept together in one RFQ conversation.
Package photos, model markings, board context, and the quantity needed for repair help focus the sourcing review on the relevant version.
When a suffix or package note is incomplete, the response records the open difference and requests buyer confirmation before procurement proceeds.
Packing format, carton notes, invoice details, courier option, destination, and tracking handoff are coordinated around the confirmed order.
The request connects the previously used model, current demand, package evidence, target timing, and replenishment sourcing route.
Related products
Packaged components ready for RFQ.
