Model & package intelligence
Model text, package form, tray or reel details, and visual evidence are reviewed together before RFQ feedback.
Kingbright APHHS1005ZGC
Configuration
1 options
Configuration
26+
Available for RFQ
Technical data
Product details
20
specifications
Core information
- Product name
- Kingbright APHHS1005ZGC
- Type
- KINGBRIGHT
- Unit
- Electronic Component
- Minimum package
- 2000 圆盘
Technical parameters
- Power
- 102.5mW
- Electronic Component
- Electronic Component
- Electronic Component
- Electronic Component
- Electronic Component
- KINGBRIGHT
- Electronic Component
- APHHS1005ZGC
- Electronic Component
- 1
- Package
- 0402
- Electronic Component
- 525nm
- Electronic Component
- LEDDiode / LED
- Electronic Component
- 0.162g
- Electronic Component
- 1
- LED
- 450mcd
- LED
- 140°
- LED
- Electronic Component
- Electronic Component
- BM0265323029
- Electronic Component
- 515nm
For datasheets, package documents, compatible-part guidance, or other technical resources, contact WMSIC customer service. Availability is confirmed case by case.
Kingbright APHHS1005ZGC SMD LED 产品概述
一、产品定位与核心属性
APHHS1005ZGC是Kingbright（台湾今台）推出的一款小尺寸高亮度翠绿色SMD LED，采用0402（公制1005）封装，主打紧凑空间内的状态指示、背光辅助及小型照明应用，兼具高可靠性与宽环境适应性，是消费电子、工业控制、汽车电子等领域的实用型贴片灯珠。
二、核心光电参数解析
该产品的光电性能参数经过优化，满足多数场景的亮度与稳定性需求：
- 正向电特性：标准正向电流（If）为20mA，对应正向压降（Vf）3.3V，额定功率102.5mW，常规驱动下功耗低且输出稳定；
- 发光特性：发光颜色为翠绿色，主波长525nm、峰值波长515nm，视觉辨识度高且色彩纯正；发光强度达450mcd，20mA驱动下可清晰显示；发光角度140°为宽视角设计，适合小型面板背光等均匀出光场景；
- 光学结构：采用无色透明透镜，避免对绿光的吸收与偏色，最大程度还原翠绿色光的亮度与纯度。
三、封装规格与尺寸
APHHS1005ZGC采用0402封装（公制尺寸1.0mm×0.5mm），是贴片LED中尺寸极小的规格之一，优势在于：
- 可实现PCB板高密度布局，适配智能穿戴、小型传感器、微型控制器等紧凑设计；
- 封装工艺成熟，焊接可靠性高，兼容回流焊、波峰焊等常规贴片工艺。
四、典型应用场景
基于小尺寸、高亮度与宽温特性，该产品适用于以下场景：
- 消费电子：智能手表/手环的心率监测辅助灯、蓝牙耳机配对指示灯、小型电子秤状态显示灯；
- 工业控制：PLC运行/故障指示灯、传感器模块信号提示灯、小型仪器仪表背光；
- 汽车电子：仪表盘小型警示灯（如安全带提示）、车载USB充电指示灯；
- 通信设备：路由器端口状态灯、光纤收发器信号指示灯。
五、性能优势总结
- 小尺寸高密度：0402封装可在有限PCB空间集成更多LED，满足紧凑设计需求；
- 高亮度低功耗：20mA驱动下输出450mcd亮度，功率仅102.5mW，兼顾显示效果与能效；
- 色彩稳定可靠：波长偏差小，翠绿色视觉一致性好，长期使用无明显色衰；
- 宽温适应性：工作温度-40℃~+85℃，可在北方户外设备、车载仪表等极端环境稳定工作；
- 品牌品质保障：Kingbright作为全球知名厂商，产品经严格可靠性测试，故障率低。
六、可靠性与注意事项
该产品符合工业级可靠性标准，需注意：
- 驱动电流建议控制在20mA以内，避免过流导致亮度衰减或损坏；
- 焊接温度遵循官方规格（回流焊峰值≤260℃），防止封装损坏；
- 存储环境建议0℃~+40℃、湿度≤60%，避免静电损伤。
APHHS1005ZGC以小尺寸、高亮度与宽温特性，成为紧凑场景LED应用的优选方案，可根据具体需求进一步评估参数匹配度。
Request for quote
Send RFQ
Use the form for single models, category sourcing, and multi-line BOM requirements.
Product sourcing intelligence
Model, package, availability, and BOM fit reviewed before quotation.
WMSIC turns product data, package visuals, BOM context, and sourcing signals into practical RFQ notes for buyers.
BOM matching & alternatives
BOM lines are compared by package, parameters, quantity, and workable alternatives for cleaner sourcing decisions.
Sourcing availability signal
Stock routes, quotation confidence, lead-time notes, and shipment feasibility are checked before sales follow-up.
Buyer sourcing scenarios
Examples of how common component sourcing requests are organized.
Typical RFQ scenarios based on the WMSIC form fields, catalog data, manual review steps, and shipment preparation workflow.
The buyer shares the full part number, package requirement, quantity, destination, and available product photos so the quotation can record the exact version under review.
A multi-line BOM is organized into direct sourcing lines, lines that need package clarification, and lines where alternative-part review is permitted.
The original manufacturer part number, datasheet revision, application, critical limits, and acceptable changes are collected before possible candidates are discussed.
Sample quantity, minimum packing, package format, target date, and courier destination are kept together in one RFQ conversation.
Package photos, model markings, board context, and the quantity needed for repair help focus the sourcing review on the relevant version.
When a suffix or package note is incomplete, the response records the open difference and requests buyer confirmation before procurement proceeds.
Packing format, carton notes, invoice details, courier option, destination, and tracking handoff are coordinated around the confirmed order.
The request connects the previously used model, current demand, package evidence, target timing, and replenishment sourcing route.
Related products
Packaged components ready for RFQ.
