Model & package intelligence
Model text, package form, tray or reel details, and visual evidence are reviewed together before RFQ feedback.
lelon VE-101M1CTR-0605
Configuration
1 options
Configuration
26+
Available for RFQ
Technical data
Product details
19
specifications
Core information
- Product name
- lelon VE-101M1CTR-0605
- Type
- LELON
- Minimum package
- 1000
Technical parameters
- Electronic Component
- LELON
- Electronic Component
- VE-101M1CTR-0605
- Electronic Component
- 1
- Electronic Component
- 100uF
- Package
- SMD,D6.3xL5.3mm
- Electronic Component
- SMD Aluminum Electrolytic Capacitor
- Electronic Component
- ±20%
- Electronic Component
- 0.468g
- Electronic Component
- 1
- Electronic Component
- BM0263572447
- Electronic Component
- 2000hrs@85℃
- Operating Temperature
- 40℃~+85℃
- Voltage
- 16V
- Capacitor
- 6.3mm
- Capacitor
- 5.3mm
- Electronic Component
- 1000
For datasheets, package documents, compatible-part guidance, or other technical resources, contact WMSIC customer service. Availability is confirmed case by case.
VE-101M1CTR-0605 贴片铝电解电容产品概述
一、产品定位与核心优势
VE-101M1CTR-0605是台湾立隆（LELON）针对便携式电子设备、小型电源模块等高密度贴装场景推出的贴片铝电解电容，核心解决“小空间内实现稳定滤波/储能”的需求。其优势体现在三个维度：
- 小体积适配紧凑PCB：直径仅6.3mm、长度5.3mm，无引脚外露，可集成到智能手机、智能手环等设备的狭小空间；
- 稳定容值覆盖常规需求：100μF±20%的容值范围，满足低压电路的纹波抑制、能量存储；
- 可靠性能支撑长期使用：-40℃~+85℃宽温范围+2000hrs@85℃寿命，适配多数消费类设备3-5年的使用周期。
二、关键参数详解
该电容的核心参数直接决定应用适配性，具体如下：
参数类型 具体指标 说明 容值与精度 100μF ±20% 覆盖低纹波滤波、储能等基础功能 额定电压 16V DC 适配手机、USB充电器等低压电路（需降额） 工作温度范围 -40℃ ~ +85℃ 低温（-40℃）性能稳定，高温（85℃）长期可靠 工作寿命 2000hrs @85℃（额定电压下） 测试条件为85℃环境+额定电压持续运行 物理尺寸 直径6.3mm × 长度5.3mm 小型贴片封装，节省PCB空间三、封装形式与贴装适配性
采用SMD（表面贴装）封装，尺寸规格为D6.3×L5.3mm，具备以下适配优势：
- 自动化生产兼容：无插件引脚，可通过SMT生产线快速贴装，提升量产效率；
- 空间利用优化：相比插件铝电解电容，体积减少约30%，适合智能手表、蓝牙耳机等紧凑设备的PCB布局；
- 焊接工艺适配：支持常规回流焊（需控制峰值温度≤260℃、单次焊接时间≤10秒），避免热损伤电解液。
四、可靠性与环境适应性
作为消费类电子常用电容，其可靠性直接影响设备稳定性：
- 高温寿命稳定性：2000hrs@85℃测试中，容值衰减率≤20%，漏电流≤额定值1.5倍，满足长期使用；
- 低温性能：-40℃环境下容值变化率≤10%，可正常工作于冬季户外使用的便携式设备；
- 抗振动能力：贴片封装机械强度优于插件电容，可承受10-500Hz振动（加速度≤1.5g），降低运输/使用中的失效风险。
五、典型应用场景
因小体积、稳定容值的特点，广泛应用于以下场景：
- 便携式电子：智能手机、智能手环的电源滤波电路，滤除直流纹波，提升音频/信号质量；
- 小型电源：USB充电器、5V/12V适配器的输出端储能，稳定电压波动；
- LED驱动：室内LED台灯、智能灯泡的驱动滤波，减少光频闪；
- 物联网模块：传感器节点、智能家居控制器的电源电路，适配小尺寸PCB设计。
六、选型与使用注意事项
为确保设备稳定，需注意以下要点：
- 电压降额：实际工作电压建议≤12.8V（降额20%），避免过压导致电解液分解；
- 温度控制：若环境温度超85℃，需增加散热设计或更换高温规格电容；
- 焊接规范：遵循立隆官方回流焊曲线（峰值245-260℃，时间≤10秒）；
- 存储条件：未开封电容存储于10-35℃、40-70%湿度环境，存储期≤12个月。
该电容凭借“小体积+稳定性能”的平衡，成为消费类电子领域低压滤波/储能场景的高性价比选择。
Request for quote
Send RFQ
Use the form for single models, category sourcing, and multi-line BOM requirements.
Product sourcing intelligence
Model, package, availability, and BOM fit reviewed before quotation.
WMSIC turns product data, package visuals, BOM context, and sourcing signals into practical RFQ notes for buyers.
BOM matching & alternatives
BOM lines are compared by package, parameters, quantity, and workable alternatives for cleaner sourcing decisions.
Sourcing availability signal
Stock routes, quotation confidence, lead-time notes, and shipment feasibility are checked before sales follow-up.
Buyer sourcing scenarios
Examples of how common component sourcing requests are organized.
Typical RFQ scenarios based on the WMSIC form fields, catalog data, manual review steps, and shipment preparation workflow.
The buyer shares the full part number, package requirement, quantity, destination, and available product photos so the quotation can record the exact version under review.
A multi-line BOM is organized into direct sourcing lines, lines that need package clarification, and lines where alternative-part review is permitted.
The original manufacturer part number, datasheet revision, application, critical limits, and acceptable changes are collected before possible candidates are discussed.
Sample quantity, minimum packing, package format, target date, and courier destination are kept together in one RFQ conversation.
Package photos, model markings, board context, and the quantity needed for repair help focus the sourcing review on the relevant version.
When a suffix or package note is incomplete, the response records the open difference and requests buyer confirmation before procurement proceeds.
Packing format, carton notes, invoice details, courier option, destination, and tracking handoff are coordinated around the confirmed order.
The request connects the previously used model, current demand, package evidence, target timing, and replenishment sourcing route.
Related products
Packaged components ready for RFQ.
1 Piece BGA Integrated Circuit Chipset MN864739 CXD90061GG CXD90062GG PS5 QFN-80
- Model
- MN864739
- Package
