Model & package intelligence
Model text, package form, tray or reel details, and visual evidence are reviewed together before RFQ feedback.
lelon VZH101M1KTR-1010 VZH101M1KTR
Configuration
1 options
Configuration
26+
Available for RFQ
Technical data
Product details
19
specifications
Core information
- Product name
- lelon VZH101M1KTR-1010
- Type
- LELON
- Minimum package
- 500 圆盘
Technical parameters
- Electronic Component
- Electronic Component
- Electronic Component
- LELON
- Electronic Component
- VZH101M1KTR-1010
- Electronic Component
- 1
- Electronic Component
- 100uF
- Package
- SMD,D10xL10mm
- Electronic Component
- SMD Aluminum Electrolytic Capacitor
- Electronic Component
- ±20%
- Electronic Component
- 1.754g
- Electronic Component
- 1
- Electronic Component
- BM0264520764
- Electronic Component
- 5000hrs@105℃
- Operating Temperature
- 45℃~+105℃
- Voltage
- 80V
- Capacitor
- 10mm
- Capacitor
- 10mm
For datasheets, package documents, compatible-part guidance, or other technical resources, contact WMSIC customer service. Availability is confirmed case by case.
VZH101M1KTR-1010铝电解电容器产品概述
一、产品基本定位与品牌背景
VZH101M1KTR-1010是台湾立隆电子（lelom）推出的表面贴装（SMD）铝电解电容器，定位于中高压、中等容量的滤波/储能场景，兼顾可靠性与体积优化，是工业控制、消费电子等领域的常规选型元件。立隆作为专注铝电解电容研发的厂商，产品覆盖消费级、工业级，其SMD电解电容以尺寸紧凑、寿命稳定著称，广泛应用于全球电子制造。
二、核心电气参数详解
该型号核心性能明确，满足多数中压电路需求：
- 容值与精度：标称100μF，精度±20%（符合铝电解常规精度，适用于滤波、储能等对精度要求不苛刻的场景）；
- 额定电压：直流80V（铝电解仅适用于直流电路，交流场景需降额或选交流电解）；
- 工作温区：-45℃至+105℃，覆盖工业级高温场景（如高温电源模块），低温性能满足寒带设备需求；
- 寿命指标：5000小时@105℃（温度是电解寿命核心影响因素，该指标远高于普通消费级电容，支撑长期高温运行）。
三、物理封装与尺寸规格
采用SMD贴片封装，电容本体尺寸为直径10mm×长度10mm（D10×L10mm），体积紧凑，适配常规PCB焊盘，兼容自动化贴装生产线（需遵循立隆焊接规范）。需注意：贴片电解带极性标识，装配时需严格对应PCB正负极，避免反接损坏。
四、可靠性与环境适应性
针对工业环境优化设计：
- 高温寿命稳定性：5000小时@105℃的寿命，降低高温工况维护成本；
- 宽温覆盖：-45℃至+105℃，适应寒带户外设备到高温厂房的工业电路；
- 振动兼容性：SMD结构设计（引脚与本体连接强度）满足常规电子设备振动要求（如小型变频器、PLC）。
五、典型应用场景
参数特性适配以下场景：
- 工业控制电源：PLC电源模块纹波抑制、变频器直流母线滤波储能；
- 消费电子中高压电路：变频空调/洗衣机电源板滤波、LED驱动电源储能；
- 通信辅助电源：基站辅助电源、路由器电源模块中压滤波；
- 车载电子（部分场景）：车载充电器辅助电源滤波（需确认工况温区≤105℃）。
六、选型与使用注意事项
确保性能与寿命需注意：
- 电压降额：实际工作电压≤64V（额定80%），避免过压老化；
- 温度控制：避免长期超105℃，高温工况需定期检查容值/漏电流；
- 极性确认：核对电容极性标识（色带/引脚形状），反接会导致漏电流剧增甚至爆炸；
- 焊接规范：遵循立隆推荐曲线（回流焊峰值≤260℃，时间≤10秒），避免过热损坏；
- 储存条件：未使用电容储存在-20℃至40℃、湿度≤60%环境，长期储存（>1年）需复测性能。
该型号以平衡的性能与成本，成为中高压SMD电解电容的实用选型，可满足多数工业与消费电子的稳定运行需求。
Request for quote
Send RFQ
Use the form for single models, category sourcing, and multi-line BOM requirements.
Product sourcing intelligence
Model, package, availability, and BOM fit reviewed before quotation.
WMSIC turns product data, package visuals, BOM context, and sourcing signals into practical RFQ notes for buyers.
BOM matching & alternatives
BOM lines are compared by package, parameters, quantity, and workable alternatives for cleaner sourcing decisions.
Sourcing availability signal
Stock routes, quotation confidence, lead-time notes, and shipment feasibility are checked before sales follow-up.
Buyer sourcing scenarios
Examples of how common component sourcing requests are organized.
Typical RFQ scenarios based on the WMSIC form fields, catalog data, manual review steps, and shipment preparation workflow.
The buyer shares the full part number, package requirement, quantity, destination, and available product photos so the quotation can record the exact version under review.
A multi-line BOM is organized into direct sourcing lines, lines that need package clarification, and lines where alternative-part review is permitted.
The original manufacturer part number, datasheet revision, application, critical limits, and acceptable changes are collected before possible candidates are discussed.
Sample quantity, minimum packing, package format, target date, and courier destination are kept together in one RFQ conversation.
Package photos, model markings, board context, and the quantity needed for repair help focus the sourcing review on the relevant version.
When a suffix or package note is incomplete, the response records the open difference and requests buyer confirmation before procurement proceeds.
Packing format, carton notes, invoice details, courier option, destination, and tracking handoff are coordinated around the confirmed order.
The request connects the previously used model, current demand, package evidence, target timing, and replenishment sourcing route.
Related products
Packaged components ready for RFQ.
