Model & package intelligence
Model text, package form, tray or reel details, and visual evidence are reviewed together before RFQ feedback.
muRata GJM0335C1H1R2WB01D
Configuration
1 options
Configuration
26+
Available for RFQ
Technical data
Product details
19
specifications
Core information
- Product name
- mu Rata GJM0335C1H1R2WB01D
- Type
- MURATA
- Unit
- Electronic Component
- Minimum package
- 15000 圆盘
Technical parameters
- Electronic Component
- Electronic Component
- Electronic Component
- Electronic Component
- Electronic Component
- MURATA
- Electronic Component
- GJM0335C1H1R2WB01D
- Electronic Component
- 1
- Electronic Component
- 1.2pF
- Package
- 0201
- Electronic Component
- SMD Capacitor(MLCC)
- Electronic Component
- 0.008g
- Electronic Component
- 1
- Electronic Component
- BM0259372234
- Electronic Component
- C0G
- Voltage
- 50V
- Electronic Component
- Electronic Component
- Electronic Component
- 15000
For datasheets, package documents, compatible-part guidance, or other technical resources, contact WMSIC customer service. Availability is confirmed case by case.
GJM0335C1H1R2WB01D 产品概述
一、产品简介
GJM0335C1H1R2WB01D 是村田（muRata）生产的一款0201贴片多层陶瓷电容（MLCC），标称容量为 1.2 pF，额定电压 50 V，温度系数为 C0G（又称 NP0），适用于对容量稳定性和低损耗有较高要求的小型电子设备和高频电路。
二、主要特点
- 极小封装：0201（典型外形用于高密度贴装），适合空间受限的设计。
- 温度稳定：C0G/NP0 材料，温度系数接近 0 ppm/°C（典型为 0 ±30 ppm/°C），容量随温度变化极小。
- 低损耗、低寄生：适合射频、振荡器和高精度定时电路，具有很低的等效串联电阻（ESR）和耗散因子（DF）。
- 可靠性高：多层陶瓷结构，适应一般表面贴装工艺和回流焊温度曲线。
三、典型应用
- 高频/射频电路的耦合、去耦与匹配网络；
- 石英晶体或振荡器电路中用于负载/定时；
- 高频滤波器、阻抗匹配与谐振回路；
- 高速数字信号链路的终端/旁路元件；
- 计量与传感电路中需要高稳定性的滤波元件。
四、电气与物理参数（概要）
- 容值：1.2 pF；
- 额定电压：50 V DC；
- 温度系数：C0G/NP0（温度稳定性优）；
- 封装：0201 贴片（极小尺寸，适合高密度 PCB 设计）；
- 品牌：muRata（村田），型号 GJM0335C1H1R2WB01D。
注：如需详细的容差、绝缘电阻、耐压测试、额定功率及具体外形尺寸，请参照村田官方产品规格书和最新数据手册。
五、封装与焊接建议
- 0201 为微型封装，建议使用精密贴装设备与光学定位；避免手工焊接导致损伤或吸料偏移。
- 推荐遵循村田或通用的回流焊温度曲线，避免过高峰值温度与反复回流。
- 采用适当的回流焊参数与板上焊盘设计，以降低机械应力和热应力影响；必要时在 PCB 设计中加入应力缓冲结构。
- 对吸湿敏感等级（MSL）和包装方式应予以确认并按厂家建议进行烘烤与防潮处理，特别是在长期存储或高湿环境下。
六、可靠性与注意事项
- C0G 型电容在温漂、介质吸收和老化方面表现优于高K 型陶瓷，适合对精度敏感的电路。
- 小容值器件在高电场（接近额定电压）下可能出现微弱的电压系数效应，实际电容随直流偏置略有变化，设计时请预留裕量。
- 0201 体积小，对机械应力（如弯板、螺丝固定件附近）较敏感，装配与测试过程中应避免碰撞与过度挤压。
七、采购与替代
- 订购时请确认完整料号 GJM0335C1H1R2WB01D、数量与包装（卷带/盘装等）；如需样品或长周期供货，请与村田或授权代理联系。
- 在无法采购时，可选用其他厂商的 0201、C0G、1.2 pF、50 V MLCC 作为替代，但需核对尺寸、容差、温漂和电压系数等关键参数，验证在目标电路中的等效性能。
如需我帮忙查找该型号的官方规格书、封装尺寸图或与您电路匹配的替代型号，我可以继续提供支持。
Request for quote
Send RFQ
Use the form for single models, category sourcing, and multi-line BOM requirements.
Product sourcing intelligence
Model, package, availability, and BOM fit reviewed before quotation.
WMSIC turns product data, package visuals, BOM context, and sourcing signals into practical RFQ notes for buyers.
BOM matching & alternatives
BOM lines are compared by package, parameters, quantity, and workable alternatives for cleaner sourcing decisions.
Sourcing availability signal
Stock routes, quotation confidence, lead-time notes, and shipment feasibility are checked before sales follow-up.
Buyer sourcing scenarios
Examples of how common component sourcing requests are organized.
Typical RFQ scenarios based on the WMSIC form fields, catalog data, manual review steps, and shipment preparation workflow.
The buyer shares the full part number, package requirement, quantity, destination, and available product photos so the quotation can record the exact version under review.
A multi-line BOM is organized into direct sourcing lines, lines that need package clarification, and lines where alternative-part review is permitted.
The original manufacturer part number, datasheet revision, application, critical limits, and acceptable changes are collected before possible candidates are discussed.
Sample quantity, minimum packing, package format, target date, and courier destination are kept together in one RFQ conversation.
Package photos, model markings, board context, and the quantity needed for repair help focus the sourcing review on the relevant version.
When a suffix or package note is incomplete, the response records the open difference and requests buyer confirmation before procurement proceeds.
Packing format, carton notes, invoice details, courier option, destination, and tracking handoff are coordinated around the confirmed order.
The request connects the previously used model, current demand, package evidence, target timing, and replenishment sourcing route.
Related products
Packaged components ready for RFQ.
