Model & package intelligence
Model text, package form, tray or reel details, and visual evidence are reviewed together before RFQ feedback.
MOLEX 534260410
Configuration
1 options
Configuration
25+
Available for RFQ
Technical data
Product details
13
specifications
Core information
- Product name
- MOLEX 534260410
- Type
- MOLEX
- Minimum package
- 200 托盘
Technical parameters
- Electronic Component
- Electronic Component
- Electronic Component
- MOLEX
- Electronic Component
- 534260410
- Electronic Component
- 1
- Package
- P=2.5mm
- Electronic Component
- 0.619g
- Electronic Component
- 1
- Electronic Component
- BM0231021194
- Electronic Component
- Electronic Component
- Electronic Component
- 200
For datasheets, package documents, compatible-part guidance, or other technical resources, contact WMSIC customer service. Availability is confirmed case by case.
MOLEX 534260410 线对板针座产品概述
一、产品定位与核心属性
MOLEX 534260410是一款单排4针弯插式线对板针座，属于MOLEX常规2.5mm间距系列的基础型号，核心定位为中小功率电子设备的内部信号/功率传输。其设计围绕“紧凑布局+可靠连接+宽环境适应性”展开，适配空间受限、需频繁插拔或高低温的应用场景，是量产化产品的高性价比选择。
二、关键技术参数深度解析
该针座的参数经过针对性优化，平衡了性能与成本：
- 机械结构：1×4P单排布局（比多排节省约30%水平空间），间距2.5mm（市场主流标准，与同间距端子兼容性强）；弯插安装（PCB垂直焊接，适配板边或内部紧凑布局）。
- 电气性能：额定电流3A（满足小型电机、LED驱动等一般消费电子功率需求）；额定电压250V（符合低压电气安全规范）。
- 环境适应性：工作温度-55℃~+105℃（覆盖工业级高低温，可用于车载、户外小型设备）；阻燃等级UL94V-0（遇火不延燃，通过UL安全认证）。
- 材料工艺：触头采用磷青铜（弹性优异，多次插拔后仍保持稳定接触力）；触头镀锡（防氧化，长期使用接触电阻稳定）；绝缘主体为白色阻燃塑料（便于识别，机械强度可靠）。
三、设计特点与材料优势
- 触头可靠性：磷青铜的弹性记忆性避免多次插拔后触头变形，锡镀层比裸铜抗氧化性提升3倍以上，接触电阻长期稳定在10mΩ以内。
- 安装便捷性：弯插针脚无需额外PCB支撑，支持自动化贴装（SMT）或手工焊接，针脚长度设计合理，降低假焊/空焊概率。
- 空间利用率：单排4针结构适配小型化产品（如便携式设备、小型家电控制器），可替代多排针座减少布局冲突。
四、典型应用场景
因参数适配性强，该针座广泛应用于：
- 消费电子：加湿器、台灯控制器、蓝牙音箱、移动电源的内部板间连接；
- 小型工业设备：传感器模块、PLC辅助IO模块的信号传输；
- 车载电子：车载充电器、氛围灯控制器、小型车载显示屏的内部连接；
- 通信周边：小型路由器、交换机的电源/信号接口。
五、安装与可靠性注意事项
为确保性能稳定，需注意：
- 焊接规范：焊接温度≤260℃，单次焊接时间≤3秒，避免高温损坏镀层或绝缘主体；
- 插拔匹配：必须搭配MOLEX同间距2.5mm线端端子（如对应端子系列），非匹配端子易导致触头变形；
- 环境防护：避免长期暴露在腐蚀性气体（如硫化氢）或高湿度（>95%RH带凝露）环境，户外应用建议额外做防水防护。
总结
MOLEX 534260410作为基础型线对板针座，凭借紧凑结构、可靠触头、宽温适应性及UL认证，成为中小功率电子设备内部连接的高性价比之选。其兼容性强、安装便捷的特点，适配量产化生产及多样化应用场景，是电子设计中常用的“基础型连接方案”。
Request for quote
Send RFQ
Use the form for single models, category sourcing, and multi-line BOM requirements.
Product sourcing intelligence
Model, package, availability, and BOM fit reviewed before quotation.
WMSIC turns product data, package visuals, BOM context, and sourcing signals into practical RFQ notes for buyers.
BOM matching & alternatives
BOM lines are compared by package, parameters, quantity, and workable alternatives for cleaner sourcing decisions.
Sourcing availability signal
Stock routes, quotation confidence, lead-time notes, and shipment feasibility are checked before sales follow-up.
Buyer sourcing scenarios
Examples of how common component sourcing requests are organized.
Typical RFQ scenarios based on the WMSIC form fields, catalog data, manual review steps, and shipment preparation workflow.
The buyer shares the full part number, package requirement, quantity, destination, and available product photos so the quotation can record the exact version under review.
A multi-line BOM is organized into direct sourcing lines, lines that need package clarification, and lines where alternative-part review is permitted.
The original manufacturer part number, datasheet revision, application, critical limits, and acceptable changes are collected before possible candidates are discussed.
Sample quantity, minimum packing, package format, target date, and courier destination are kept together in one RFQ conversation.
Package photos, model markings, board context, and the quantity needed for repair help focus the sourcing review on the relevant version.
When a suffix or package note is incomplete, the response records the open difference and requests buyer confirmation before procurement proceeds.
Packing format, carton notes, invoice details, courier option, destination, and tracking handoff are coordinated around the confirmed order.
The request connects the previously used model, current demand, package evidence, target timing, and replenishment sourcing route.
Related products
Packaged components ready for RFQ.
