Model & package intelligence
Model text, package form, tray or reel details, and visual evidence are reviewed together before RFQ feedback.
Nexperia 74AUP2G07GS,132 74AUP2G07GS
Configuration
1 options
Configuration
25+
Available for RFQ
Technical data
Product details
20
specifications
Core information
- Product name
- Nexperia 74AUP2G07GS, 132
- Type
- NEXPERIA
- Unit
- Electronic Component
- Minimum package
- 5000 圆盘
Technical parameters
- Electronic Component
- Electronic Component
- Electronic Component
- Electronic Component
- Electronic Component
- NEXPERIA
- Electronic Component
- 74AUP2G07GS,132
- Electronic Component
- 1
- Package
- XSON-6(1x1)
- Electronic Component
- Buffers / Drivers / Transceivers
- Electronic Component
- 74AUP
- Electronic Component
- 0.029g
- Electronic Component
- 2
- Electronic Component
- 1
- Features
- Isolated
- Electronic Component
- BM0227556078
- Operating Temperature
- 40℃~+125℃
- Operating Voltage
- 0.8V~3.6V
- Type
- Flip-Flop
For datasheets, package documents, compatible-part guidance, or other technical resources, contact WMSIC customer service. Availability is confirmed case by case.
74AUP2G07GS,132 产品概述
一、功能简介
74AUP2G07GS,132 是 Nexperia（安世）推出的一款低压双通道缓冲器/线路驱动器，输入为施密特触发器（Schmitt trigger），输出为开漏（open-drain）。每个元件包含 2 位独立通道，单向传输，适用于对噪声敏感或需要线与线“有线或”（wired-OR）功能的数字信号处理场合。
二、主要特点
- 工作电压范围宽：0.8V ～ 3.6V，兼容超低电压与常见 1.8V/3.3V 系统。
- 极低静态电流：Iq ≈ 0.9 μA，适合低功耗应用与电池供电设备。
- 输出为开漏，便于与外部上拉电阻配合实现总线或多主架构。
- 施密特输入对抖动和上升/下降慢的信号具有更好的抗干扰能力。
- 典型传播延迟 tpd = 5.7 ns（3.3V、CL = 30 pF），响应速度适合中高速数字接口。
- 工作温度范围宽：-40℃ ～ +125℃，适用于工业级场景。
- 极小封装：XSON-6 (1×1 mm)，便于空间受限的 PCB 设计。
三、电气性能要点
- 输出下拉电流 IOL = 4 mA（典型/额定值请参考数据手册），表示在指定电压下能提供的低电平拉低能力，应配合合适上拉电阻使用。
- 由于为开漏输出，输出高电平由外部上拉电阻或总线供电决定，上拉阻值应在速度和功耗之间权衡。
- 低静态电流使其在休眠或空闲时非常省电，但动态切换功耗与负载、开关频率相关。
四、封装与热管理
XSON-6 (1×1 mm) 超小封装适合便携设备和高密度 PCB。该封装热阻相对较高，建议在高切换频率或高环境温度下注意功耗控制与良好 PCB 散热（如加大铜箔、走热孔或短距离接地层）。布线时尽量缩短数字信号和电源走线，电源端旁边放置去耦电容（0.01–0.1 μF）。
五、典型应用场景
- 电平转换（结合合适上拉可实现弱电平匹配）
- 总线驱动/多点连接的信号缓冲（需有线或功能）
- 抗噪声输入缓冲、电平整形（来自传感器或长线缆的慢变信号）
- 低功耗便携设备、可穿戴、工业控制和物联网节点
六、设计与使用建议
- 为保证信号完整性，施密特输入处理的慢边沿仍应避免过长的布线和串扰。
- 选择上拉电阻时考虑 IOL 与所需上升时间：上拉阻值过大导致上升慢，过小增加功耗并加大器件应力。
- 输入不可悬空，需定义上/下拉或通过器件外部电路固定。
- 参考 Nexperia 数据手册的完整电气特性表以获得最低/最高界限和瞬态规范。
七、采购与替代
74AUP2G07GS,132 属于 74AUP 低压高性能系列，若需替代，可在同系列中选择具有相似功能与封装的双通道施密特-开漏器件，但在更换前须核对电压范围、IOL、延迟、封装及工作温度等关键参数以确保兼容。若需样片或批量采购，建议通过 Nexperia 官方渠道或授权分销商获取正品数据与可靠的技术支持。
Request for quote
Send RFQ
Use the form for single models, category sourcing, and multi-line BOM requirements.
Product sourcing intelligence
Model, package, availability, and BOM fit reviewed before quotation.
WMSIC turns product data, package visuals, BOM context, and sourcing signals into practical RFQ notes for buyers.
BOM matching & alternatives
BOM lines are compared by package, parameters, quantity, and workable alternatives for cleaner sourcing decisions.
Sourcing availability signal
Stock routes, quotation confidence, lead-time notes, and shipment feasibility are checked before sales follow-up.
Buyer sourcing scenarios
Examples of how common component sourcing requests are organized.
Typical RFQ scenarios based on the WMSIC form fields, catalog data, manual review steps, and shipment preparation workflow.
The buyer shares the full part number, package requirement, quantity, destination, and available product photos so the quotation can record the exact version under review.
A multi-line BOM is organized into direct sourcing lines, lines that need package clarification, and lines where alternative-part review is permitted.
The original manufacturer part number, datasheet revision, application, critical limits, and acceptable changes are collected before possible candidates are discussed.
Sample quantity, minimum packing, package format, target date, and courier destination are kept together in one RFQ conversation.
Package photos, model markings, board context, and the quantity needed for repair help focus the sourcing review on the relevant version.
When a suffix or package note is incomplete, the response records the open difference and requests buyer confirmation before procurement proceeds.
Packing format, carton notes, invoice details, courier option, destination, and tracking handoff are coordinated around the confirmed order.
The request connects the previously used model, current demand, package evidence, target timing, and replenishment sourcing route.
Related products
Packaged components ready for RFQ.
1 Piece Integrated Circuit for IRS20124S IRS21956S SOP-20 IRS2453DS SOP-14
- Model
- IRS20124S
- Package
