Model & package intelligence
Model text, package form, tray or reel details, and visual evidence are reviewed together before RFQ feedback.
CBTL02042ABQ,115 CBTL02042ABQ
Configuration
1 options
Configuration
Date code within 2 years
Available for RFQ
Technical data
Product details
15
specifications
Core information
- Product name
- NXP CBTL02042ABQ, 115
- Type
- 20-DHVQFN(4.5X2.5)
- Minimum package
- 3000 圆盘
Technical parameters
- Electronic Component
- Electronic Component
- Electronic Component
- NXP
- Electronic Component
- CBTL02042ABQ,115
- Electronic Component
- 1
- Package
- 20-DHVQFN（4.5x2.5）
- Electronic Component
- Analog Switch / Multiplexer
- Electronic Component
- 0.086g
- Electronic Component
- 1
- Features
- Analog; Isolated
- Electronic Component
- BM0257709513
- Electronic Component
- Electronic Component
- Electronic Component
- 3000
For datasheets, package documents, compatible-part guidance, or other technical resources, contact WMSIC customer service. Availability is confirmed case by case.
CBTL02042ABQ,115 产品概述
一 产品简介
CBTL02042ABQ,115 是恩智浦（NXP）推出的一款高性能双通道双向开关芯片，采用 20 引脚 DHVQFN 封装（4.5 × 2.5 mm），面向高带宽差分接口的多路复用/解复用应用。器件支持 2:1 切换结构，每通道均为双向传输路径，适用于 DisplayPort、PCIe、USB 和 SATA 等高速接口的线路切换与复用。器件工作温度范围为 -40°C 至 85°C，供电电压为单电源 3.0 V 至 3.6 V。
二 主要规格与特性
- 通道数：2（两路差分或两路信号路径）
- 拓扑：2:1 多路复用/解复用，双向切换
- 带宽（-3 dB）：7 GHz（典型值，适合高速串行信号）
- 最大导通电阻（R_ON）：6 Ω（标准）
- 供电：V+ = 3.0 V ～ 3.6 V（单电源）
- 工作温度：-40°C ～ 85°C（TA）
- 封装：20-DHVQFN（4.5 × 2.5 mm），表面贴装型
- 典型应用：DisplayPort、PCIe、USB、SATA 等高速差分链路切换
三 典型应用场景
- 移动设备或笔记本的外部接口复用（例如 USB/DisplayPort 切换）
- 主板或扩展卡上高速通道选择（PCIe 信号复用与保护）
- 多端口系统的信号路由与热插拔管理
- 对应需要保持信号完整性与低插入损耗的高速链路切换场景
四 设计与布局建议
为了发挥 CBTL02042ABQ 的高频性能并保证信号完整性，建议在PCB设计与系统集成时注意以下要点：
- 差分对走线保持受控阻抗并尽量匹配长度，避免在开关附近形成长分支和反射点；
- 在器件电源引脚附近放置适当的去耦电容（如 0.1 µF 与 1 µF 组合），尽量靠近 V+ 引脚布置；
- QFN 封装的焊盘与底部散热垫应按厂商推荐脚位焊盘设计，确保良好接地与热流；
- 在高速接口处保持最小的走线过孔数量，必要时在开关上下游靠近接收端或发送端施加差分终端匹配；
- 考虑系统 ESD 保护与共模干扰抑制，必要时在板级加装专用保护器件；
- 评估在热插拔与切换过程中可能出现的信号瞬态，设计合适的上电/断电与控制逻辑策略以保护收发端。
五 优势与选型理由
CBTL02042ABQ,115 提供高达 7 GHz 的带宽和双向 2:1 切换能力，适配多种主流高速接口，且在 3.0 V 单电源设计下实现兼容性与集成度。其小型 20 引脚 DHVQFN 封装利于空间受限设备的板级布局，最大 6 Ω 的导通电阻在多数差分链路中可保持较低的插入损耗。对于需要在有限空间内实现可靠端口复用与高速信号路由的系统，CBTL02042ABQ 是一种平衡性能、封装与功耗的优选器件。
Request for quote
Send RFQ
Use the form for single models, category sourcing, and multi-line BOM requirements.
Product sourcing intelligence
Model, package, availability, and BOM fit reviewed before quotation.
WMSIC turns product data, package visuals, BOM context, and sourcing signals into practical RFQ notes for buyers.
BOM matching & alternatives
BOM lines are compared by package, parameters, quantity, and workable alternatives for cleaner sourcing decisions.
Sourcing availability signal
Stock routes, quotation confidence, lead-time notes, and shipment feasibility are checked before sales follow-up.
Buyer sourcing scenarios
Examples of how common component sourcing requests are organized.
Typical RFQ scenarios based on the WMSIC form fields, catalog data, manual review steps, and shipment preparation workflow.
The buyer shares the full part number, package requirement, quantity, destination, and available product photos so the quotation can record the exact version under review.
A multi-line BOM is organized into direct sourcing lines, lines that need package clarification, and lines where alternative-part review is permitted.
The original manufacturer part number, datasheet revision, application, critical limits, and acceptable changes are collected before possible candidates are discussed.
Sample quantity, minimum packing, package format, target date, and courier destination are kept together in one RFQ conversation.
Package photos, model markings, board context, and the quantity needed for repair help focus the sourcing review on the relevant version.
When a suffix or package note is incomplete, the response records the open difference and requests buyer confirmation before procurement proceeds.
Packing format, carton notes, invoice details, courier option, destination, and tracking handoff are coordinated around the confirmed order.
The request connects the previously used model, current demand, package evidence, target timing, and replenishment sourcing route.
Related products
