Model & package intelligence
Model text, package form, tray or reel details, and visual evidence are reviewed together before RFQ feedback.
NX20P0477UKZ
Configuration
1 options
Configuration
26+
Available for RFQ
Technical data
Product details
20
specifications
Core information
- Product name
- NXP NX20P0477UKZ
- Type
- NXP
- Unit
- Electronic Component
- Minimum package
- 3000 圆盘
Technical parameters
- Electronic Component
- Electronic Component
- Electronic Component
- Electronic Component
- Electronic Component
- NXP
- Electronic Component
- NX20P0477UKZ
- Electronic Component
- 1
- Package
- WLCSP-9(1.49x1.49)
- Electronic Component
- Surge Protector
- Electronic Component
- 1g
- Electronic Component
- 1.49mm
- Electronic Component
- 0.555mm
- FETType
- Built-in FET
- Electronic Component
- 1
- Channel Count
- 2
- Electronic Component
- BM0261486864
- Electronic Component
- Electronic Component
- Operating Temperature
- 40℃~+85℃
For datasheets, package documents, compatible-part guidance, or other technical resources, contact WMSIC customer service. Availability is confirmed case by case.
NX20P0477UKZ 产品概述
一、产品简介
NX20P0477UKZ（NXP 恩智浦）是一款面向 USB Type-C 端口的腐蚀预防控制器，提供 2 通道管理功能，采用超小型 WLCSP-9 封装（1.49 mm × 1.49 mm）。该器件旨在通过对端口相关信号线进行智能偏置与断开控制，降低端口空闲或潮湿环境下的接触腐蚀风险，同时兼顾低功耗与高可靠性，适合移动设备、可穿戴产品、消费电子及车载外设等空间受限的应用场景。
二、主要特性
- 通道数：2（独立通道，便于分别管理 CC/SBU/数据线等）
- 封装：WLCSP-9，尺寸 1.49 × 1.49 mm，极小占板面积
- 功能定位：USB Type-C 端口腐蚀预防（智能偏置/断开、插拔检测辅助）
- 低漏电与低静态功耗，适配电池供电设备的省电需求
- 集成保护和开关级功能，减少外部元件需求（可包含 MOSFET 开关、模拟开关或偏置网络）
- 对 PCB 布局与 EMI 影响友好，便于高密度设计
三、典型应用场景
- 智能手机、平板与笔记本的 USB-C 充电/数据口防腐蚀设计
- 可穿戴设备与耳机类小型外设的端口可靠性增强
- 汽车内饰与工业终端的端口长期稳定性保护
- 对端口寿命与插拔次数敏感的消费电子产品
四、封装与机械信息
器件采用 WLCSP-9 球栅封装，尺寸 1.49 × 1.49 mm，适用于自动贴装与回流焊工艺。小尺寸带来 BOM 压缩与板面节省，但对 PCB 布线、阻焊和回流温度曲线有较高要求，建议在装配工艺中与制造方沟通具体的焊盘与回流规定。
五、PCB 设计与使用建议
- 布局：器件靠近 USB-C 连接器放置，通道走线尽量短、宽，以降低阻抗和耦合敏感性。
- 接地：建立连续的地平面并在器件周围配置去耦电容，提升稳态与瞬态响应。
- ESD 与 EMI：在必要位置增加 TVS 或滤波元件，但优先考虑器件自带保护能力，避免过多外部并联引起回路问题。
- 热管理：WLCSP 封装热流主要经焊盘至 PCB，建议在焊盘下方或周围布置热铺/过孔以利热扩散。
- 测试：验证器件在湿热与盐雾环境下对端口电学偏置的长期效果，评估插拔工况与误动作概率。
六、选型优势与注意事项
选择 NX20P0477UKZ 可显著提升 USB Type-C 端口的长期可靠性，节省空间与外部元件，便于在受限外形中实现腐蚀控制策略。注意在系统选型时确认器件对所需信号线（如 CC、SBU、DP/DM 等）的兼容性、电压等级与开关行为；并与制造商数据手册核对完整电气参数、极限值及推荐的 PCB 焊盘形状与回流曲线。
总结：NX20P0477UKZ 以其双通道管理、小型 WLCSP 封装和针对 USB Type-C 腐蚀预防的功能，适合对端口可靠性和空间要求较高的终端产品。建议在设计初期与供应商确认器件详细规格与评估板支持，以加速产品开发与验证进程。
Request for quote
Send RFQ
Use the form for single models, category sourcing, and multi-line BOM requirements.
Product sourcing intelligence
Model, package, availability, and BOM fit reviewed before quotation.
WMSIC turns product data, package visuals, BOM context, and sourcing signals into practical RFQ notes for buyers.
BOM matching & alternatives
BOM lines are compared by package, parameters, quantity, and workable alternatives for cleaner sourcing decisions.
Sourcing availability signal
Stock routes, quotation confidence, lead-time notes, and shipment feasibility are checked before sales follow-up.
Buyer sourcing scenarios
Examples of how common component sourcing requests are organized.
Typical RFQ scenarios based on the WMSIC form fields, catalog data, manual review steps, and shipment preparation workflow.
The buyer shares the full part number, package requirement, quantity, destination, and available product photos so the quotation can record the exact version under review.
A multi-line BOM is organized into direct sourcing lines, lines that need package clarification, and lines where alternative-part review is permitted.
The original manufacturer part number, datasheet revision, application, critical limits, and acceptable changes are collected before possible candidates are discussed.
Sample quantity, minimum packing, package format, target date, and courier destination are kept together in one RFQ conversation.
Package photos, model markings, board context, and the quantity needed for repair help focus the sourcing review on the relevant version.
When a suffix or package note is incomplete, the response records the open difference and requests buyer confirmation before procurement proceeds.
Packing format, carton notes, invoice details, courier option, destination, and tracking handoff are coordinated around the confirmed order.
The request connects the previously used model, current demand, package evidence, target timing, and replenishment sourcing route.
Related products
Packaged components ready for RFQ.
